One Way Magnetic Shielding - The Holy Grail

[James Roney]

To my YouTube viewers, and all interested parties:

I have received quite a few request on YouTube to find a better way to post my blue prints for the, "Roney Stator", one post of which invited me to come here, and post what I know. So I'll see where this goes, and post more here as time permits. However, OverUnity.com only allows 50 KB max for attachments, which means that my blue prints will not be very crisp or large in size for that matter.

This diagram shows the working design I use to make my stators perform the way they do. There is no margin for error as you must implement the shielding exactly as shown or you will end up with to much bulk. Note: You may use any non-magnetic material for spacers, but whatever you do, do NOT use aluminum for spacers or shielding as aluminum acts as magnetic brakes.

This shielding concept can easily be reformulated, applied into other design configurations. You will get results.

For a detailed overview how, and why the Roney Stator works, watch my video titled:

Part 1 - Stator for a Fuelless Magnetic Motor
http://uk.youtube.com/watch?v=rVdo0eLKwJE

Part 3 - Stator for a Fuelless Magnetic Motor - Blueprint
http://uk.youtube.com/watch?v=K-cDryO7pOE

Part 4 - One Way Magnetic Shielding - The Holy Grail
http://uk.youtube.com/watch?v=eo6CENdvG4c
In this video, my hand arks downward somewhat, but as you can see from video (Part 3) that the Roney Stator works perfectly.

To email me, simply go to my YouTube account.
http://uk.youtube.com/user/jamesroney

I hope this helps to better address how to build my one way magnetic shielding. At some point I might post a detailed report here.

[helmut]

Hello James Roney
Nice to have you here.
Welcome and thanks that you are going th share your findings with us.
If you have files as pics that are >50Kb thats fine.No need to shrink them.
If you first load the Pic to a webspace from rapidshare or some provider like
them,and than just link to the file , it will help to keep the Board fast.

The admin can give you a extra advice,where you can store bigger datas.

Everything will be fine.

Just feel like home and take part in the community

helmut

[bourne]

Hi James

waxingradiance is my youtube channel name. Thanks for coming over and posting you picture. It is much clearer than on youtube. The youtube version of the picture shows a double layer of rubber and tin on the end-section diagram, any reason for the change?
I will be trying your method once I have sourced some sheets of tin.

On the "stator video 3" it looks like the tin sheet is wrapped around both sides of the magnet (left one) is it just the rubber spacer that makes the difference? Just out of interest, what is the music for this video? it sounds like the beginning to a very good track

I must admit your "holy grail video 4" is very impressive and self explanatory.

Once again thank you for coming here and posting your information for everyone to see

[James Roney]

There is no change. I used the same blueprint here that I used in the video as best as I recall. It does not make any difference what we use for spacers as long as it's not magnetic or aluminum. I will make a detail video showing the actual construction of the stator ASAP.

The tin covers all sides of the magnet except one.

I'll have to check on the music as it one of some 3500 tunes I have stored in my iMAC.  I'll see if I can nail down the name for you.

Thank you for your interest. I hope I can be of help. I am working on something that I hope will finally resolve this riddle once and for all. I am about 10 hours away from knowing, but I can only have about 2 to 3 hours a week I can devote to this right now.

If all goes well, you, I, and the rest of the world will not only know if this is possible without the aid of electrical assistance, (non-pulse motor) but reveal exactly how this can be done incorporating a practical design that will have only one moving part. Simplicity at its best. We will soon see if I'm just crazy, or I'm actually on to something.

The design concept is so super simple, It is my belief that it will (NOT) work, as that would account for why no one has come forth with this simple idea. But on the other hand, if it works after all , it's simplicity will account for why it has been overlooked for so long.

Currently I do not have the some 20 required 4"x1"x1/4" neo bar magnets to test it, let alone the required 4" outer DIA, 3.50" inside DIA,  by 8" length cylinder magnet with the poles on the sides.  I will have to have this cylinder magnet made, I'm sure.

Thanks for your interest.

[Golden Mean]

Thank you, Thank you, Thank you!!

This really may be it... "The" Holy Grail to create a PMM.

Now... where to find the tin?!   

Peace and Blessings to you for sharing this!
Will