Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



S1r PDF coil description and discussion !!!!

Started by xbox hacker, July 08, 2008, 03:20:41 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 20 21 22 23 24 ... 40
User actions

Bruce_TPU

#105
July 15, 2008, 10:56:42 AM
Quote from: atlasman on July 15, 2008, 10:32:52 AM
You the man bruce!  Apparently your smart enough to do all what you say you will, or you wouldnt have said it all  ;D.

Im looking forward to seeing the final "WORKING" product.

atlasman

Not me, but "We".  Working = HV transformer

Whether this will work for the needs here or not, I can not speculate.  Again, we are NOT going to be testing this with the ignition coil, plug setup, at all.  We are engrossed in another build.  Our needs just happen to overlap with the needs here, at this time.   So yes, we will do what we can to make this work.  ;)   

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

xbox hacker

#106
July 15, 2008, 05:11:53 PM
I cant believe that he wasted time on making a video that shows him taking it apart!!!!! The effort could have been used in showing us EXACTLY how the winding directions go...and various other questions. What an assclown!!!! But for sake of argument i will study the video and try to get the directions right...i got nothing else better to do...i exploded my HV diode  ;D

fritz

#107
July 15, 2008, 05:23:51 PM
Pulseshaper ...

I wouldnt take the exact replication of this coil too serious.

You have a problem:

The pulse is too short - energy is consumed too fast - less
output.
So you have to build something which wides up the pulse.
This can be some inductive(coil) or capacitive thing (even mutual
capacity).
The ingredients are quite cheap, nail, wire, metal can.
There is no sharp go/nogo - there should be some experience
after few hours playing around.
I think the metal case/can casing adds a mutual capacity
which couples to the coils - and is of high importance.
The operation without the casing will be different.


rgds.

resonanceman

#108
July 15, 2008, 08:27:16 PM
Quote from: xbox hacker on July 15, 2008, 05:11:53 PM
I cant believe that he wasted time on making a video that shows him taking it apart!!!!! The effort could have been used in showing us EXACTLY how the winding directions go...and various other questions. What an assclown!!!! But for sake of argument i will study the video and try to get the directions right...i got nothing else better to do...i exploded my HV diode  ;D

Xbox

I think that people here  jump to conclusions  much to quickly      and  resort to name calling  much to often .
Could it  be that  Sr1  is doing the best he can ?

As  you  are  watching  the video  for  details about how the  coil is made .
Turn  up  the volume .
Watch  AND listen   as he  pulls on  the  ends  of the last coil .

gary

Bruce_TPU

#109
July 15, 2008, 09:38:42 PM
Hello all,

Based on the video and .pdf ALL of the "drawings" on page 1 of this thread are INCORRECT.  Might be why it doesn't work.  ;)

Hope that helps some.

Cheers all,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 20 21 22 23 24 ... 40
User actions