Joule Thief

[gadgetmall]

@Mk1 are you talking about these 
Magnetic Amplifiers U.S. Navy 1951:
http://www.overunity.com/index.php?action=tpmod;dl=item204
You will need DjVu Viewer to open the document inside the zip file.

Magnetic Amplifiers Principles and Applications1960:
http://www.overunity.com/index.php?action=tpmod;dl=item205

The document that Thaelin has been referring to is a very good reference.
The Radio Handbook - Fifteenth Addition
(http://www.phonecotech.com/OverU/Hanbook-Exerpt.gif)

Thank you Thaelin for bringing it to our attention.


EDIT **** AHHH so my thinking was right as far as using a Crystal to hold that frequency . I did mention that i can tune a toroid with the Pulse Generator .. I just needed a way to reproduce that frequency on a circuit  :)thanks ..

Al

[Mk1]

@ist

If a young can pulse a bedini and keep the charge, I don't see why we could not plus a coil on a toroid , 2 coils running in a 8 design supplied by caps, but for this the transistor may be a isue.

Those cap would only be needed for self pulsing and the pickup coils for power.

Mark

Keep the good work!

[Mk1]

@Mk1 are you talking about these 
Magnetic Amplifiers U.S. Navy 1951:
http://www.overunity.com/index.php?action=tpmod;dl=item204
You will need DjVu Viewer to open the document inside the zip file.

Magnetic Amplifiers Principles and Applications1960:
http://www.overunity.com/index.php?action=tpmod;dl=item205

The document that Thaelin has been referring to is a very good reference.
The Radio Handbook - Fifteenth Addition
(http://www.phonecotech.com/OverU/Hanbook-Exerpt.gif)

Thank you Thaelin for bringing it to our attention.


Al

Magnetic Amplifiers Principles and Applications1960

Is the one , keep in mind they don't show free energy out of it, but they explain it backward, but reading between the lines and hading to that jt knowledge.

On my last project i got dc giving me ac , 4 coil of ac perfectly timed, now i send the positive part of the wave for one coil into the other , some adjustment with a pot . ?

Btw , i tried again this morning and got 140 volts dc instead on 120 last night.


Mark

[innovation_station]

@mk1

can you post a paint dwg or somthing ....  i will un wind the crab ... it is a green toride i will build exactly what you have ...

ist...

[Mk1]

@ist

My toroid is about 1 inch, not the 1.25 one.

I will make a drawing for you, i will need to go to my windows settings and come back, but really its easy.

First make two 4 turns coil on the toroid , with bell wire(22awg) one on each side of the toroid . 4 turn on the inside of the toroid
so on the outside you only have 3 full turn.

So one coil on each side of the toroid. So you get 2 large space for pick up coils .

Then take some mag wire 22 awg about 60 inches , this will give you 2 coil(bifilar), so ply it at 30 inches.(at the end you cut the link)
Make 2 of those.

Then take ply end for the start of the coil go 12 turn of more if you can up to the next jt coil and then start the other side.

Only when both side are on that you can go back down , try to get them in the spaces left by the other wire, that way they will be all tight and nice . On my toroid i managed 44 turns , nice and tight.

Mark

That is for now more to come.