Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Joule Thief

Started by Pirate88179, November 20, 2008, 03:07:58 AM

Previous topic - Next topic

0 Members and 155 Guests are viewing this topic.

Print
Go Down Pages 1 ... 1761 1762 1763 1764 1765 ... 3388
User actions

stprue

#8810
July 31, 2009, 07:57:16 PM
Quote from: nievesoliveras on July 31, 2009, 07:45:54 PM
@stprue

Nice work with a ferrite bar. Or ist it an air coil?

Nice photos!

Jesus

Edit:
I read your post that came before mine, and it says that are 2 neos that interact with the power supply induction and produce voltage.

Thank you!

First try with the biggo JT didn't work but I will keep trying.

What do you think?  Maybe a primative mag power supply.  I posted because I think it could become much better then this tiny 2 minute test!!!

innovation_station

#8811
July 31, 2009, 07:58:46 PM
nice work jesus

sorry i kinda jumped on ya bro ... 

i do feel bad for it but not tooo bad  ;)

your a creative person .... thats for sure

now the world has the lemonaide .... 

what are they gonna do with it ... 

tesla designed the tesla coil based on the kick   and he tuned his coils by mass to get a large kick ....

it is aircore it inter acts with the enviroment and if there was a thunder storm it would interact aswell  hummmmmm   

the tesla coil turns on and off ....  right ?   

what you see out the top is in fact the off cycle ...... 

ist!

@st sounds like it saturated over time then released ... lol

kinda like a tpu winding up then pushing at whatever voltage/ amparage you desire ... 

same way my pulse motro runns ... i input 12 yet i could charge at 200 if i so desire ... at a verrrrrry high rpm ... 

considering 36v is fast i guestamate 4000 rpm ... more load faster the motor runs ... lol

so what will be if i put a load on it lol 

will it accelerate to find its own ballance ..... hummmmm



To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

THE !STORE IS UP AND RUNNING ...  WE ARE TAKEING ORDERS ..  NOW ..   ISTEAM.CA   AND WE CAN AND WILL BUILD CUSTOM COILS ...  OF   LARGER  OUTPUT ...

CAN YOU SAY GOOD BYE TO YESTERDAY?!?!?!?!

Pirate88179

#8812
July 31, 2009, 08:46:07 PM
Quote from: Cap-Z-ro on July 31, 2009, 05:23:31 PM
Huge kudo's to Jim...that set up is a great example of lateral out of the box thinking.

Its all down hill skying from here gang...the barrier is now down.

And the rest of the j/t crew are to be commended for providing a fertile atmosphere here.

I may try a short cut modification of jim's concept this wknd, if time allows.

I'm proud to even be associated with you people.

Regards...

I agree 100% Cap.  We are well on our way to 9,000 posts and everyone here has contributed a lot to the sum total of our knowledge and understanding.  I too am proud to counted among these fine folks.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen

nievesoliveras

#8813
July 31, 2009, 08:48:57 PM
Quote from: stprue on July 31, 2009, 07:57:16 PM
First try with the biggo JT didn't work but I will keep trying.

What do you think?  Maybe a primative mag power supply.  I posted because I think it could become much better then this tiny 2 minute test!!!

What I think is that you should redo the test with that coil connected to the power supply but with the power supply disconnected from the wall. If it gives the same voltage reading then you need to take the fast course that @jeanna gives on how to improve the output of a joule thief.
She made mine to light 2 leds in series with the pickup coil, when before her explanation the pickup coil did not light one led.

Jesus

nievesoliveras

#8814
July 31, 2009, 08:52:10 PM
Quote from: innovation_station on July 31, 2009, 07:58:46 PM
nice work jesus

sorry i kinda jumped on ya bro ... 

i do feel bad for it but not tooo bad  ;)

your a creative person .... thats for sure

now the world has the lemonaide .... 
..........
same way my pulse motro runns ... i input 12 yet i could charge at 200 if i so desire ... at a verrrrrry high rpm ... 

considering 36v is fast i guestamate 4000 rpm ... more load faster the motor runs ... lol

so what will be if i put a load on it lol 

will it accelerate to find its own ballance ..... hummmmm

Good for you your motor adjusts to the load, that is great!

Jesus
Print
Go Up Pages 1 ... 1761 1762 1763 1764 1765 ... 3388
User actions