HydroMeyers Vic

[Spewing]

You know what Buzz,,, You are the most misleading person i know of,,,, you spell check my work, "Like I'm going to post perfect on a forum." You down everyone and the most of it you are trying to make me look like and fool...

You know what,,,, Every time i have made a release there has always been someone there that was jellouse that wanted to put my lights out.. So i guess people will just have to get pissed off because nobody is stopping me!

If you're wondering what is going on Outside of the internet i will be kind enough to share with you a "Snippit" of whats going on. 


Them guy's that's using 7 liters of HHO per min to run their engines,,, How dumb would you appear to them if you told them they could run the very same engine, no additives, with under 1 liter per min? Sounds impossible doesn't it.....

Well, i am the guy that will show you how its done, Like i warned everyone 3 months ago i was going to end this, and embarrass allot doing so! Those of you that knows what I'm talking about,, go back and seek it, I'm not done yet!



Here you go buzz, i know you may make giggles at my work, but we will see who is giggling at who later on down the road.

The Date Was December the 20th, I stated i was a one army wind didn't i,,, brown. So you laugh it up boy, because this old dog is going to show you how its done,,, I'm posting this way before its due time, "I've never shared anything so soon before" but here's you a glimpse of whats about to plow threw this technology son!

Laugh it up boy, you wire your Ecore, because when you see these numbers you're not going to like the facts!

BTW, i can tell you right now, when a car runs on water,,,, if your psi gauge is sensitive enough it'll produce "Sine waves"

So yeah... I did set out to clean this technology up, that's just what I'm doing now sense your college grad self can not do it you have to let an unschooled Einstein do it for ya ehh....

Well,, you'll damn well wait until I'm ready to release what I'm going to release because from what i see,,,, your to damn stupid to figure it out!

Here's your snippit,, I'm not spoon feeding anyone "Yet"
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

There's four strokes based on this single cylinder.

Intake, Compress, Fire and Exhaust

1. First half of rev intake valve is open, sucking in gas to   

cylinder. "Remember, Half a rev."

2. Next half rev I've already sealed the intake valve, now i   

compress my gathered gas, When i reach my top i fire!

3. I am blown down half a rev, i contain burnt gases that forces   

me downward.

4. As i start up my exhaust valve opens, i push the exhaust gas   

out, when i reach my top peak i Reopen the intake valve. I   

start over.



13.333333333333333333333333333333 RPS;

75.000000000000000000000000000019 MS PER FULL REV

I open every 150.00000000000000000000000000002 MS

I stay open 37.500000000000000000000000000005 MS.

i do this 6.666666666666666666666666666665 times

so my total open time in one second is

249.99999999999999999999999999994 ms

i remain closed 750.0000000000000000000000000001 ms
---------------------------------------------------------
66.666666666666666666666666666667 cc's per second
15.000000000000000000000000000002 MS per 1 CC
This ran the engine.

It Used 249.99999999999999999999999999994 /

15.000000000000000000000000000002 16 cc's per second to idle minus the the 750 ms closed zones. Calculated to   cc/sec per cylinder sine wave function uncomputerized controll.  Lost gas 0, Idle speed power consumption 275 watts per cylinder. 

Warning, all though the above is a lab test it was never meant to be shared, One cant understand the numbers without actually seeing the system, nor understand the delivery methods without knowing the tune. 

Btw, the harder you laugh the buzz the better those numbers get! So you're the one thats the retard, not the one over here doing my homework! This isn't all I've been working on either,,,, "think of one who isolates his self to nothing but this technology, he'll grow an extra brain just for it no matter his education."

[Outlawstc]

"Dynamic Variable (800) of Figure (8-4) produces Flame Front (VS3) when
Dynamic Electrical Stress (RR' - SS' as to RU/RU' - ST/ST') and Dynamic Gas Pressure (Dgp) are
both increasing in magnitude by the use of Taper Cylindrical Resonant Cavity"

buzz is so dumb he cant read between the lines... magnatude by use of!!!!!! do you really know what that means ya dumb red headed step child.. you point out stuff that justify what im saying.. thank you for helping me pull more truth out of how dumb you are. you are making my day for how stupid you are but are to ignorant to see it. this is right under what you highlighted.. dynamic electrical stress and dynamic gas preasure.. so what the fuck is dynamic electrical stress you dumb dumb dumb dumb dumb idiot.. you minus well go out and stand next to the cow cause your toaltaly useless to this field.

Combinatorial Variable exists when Dynamic Voltage Pulse Wave (600) -----(NOTICE IT SAYS DYNAMIC VOLTAGE PULSE WAVE YOU DUMB INBREED)of Figure (6-3) is utilized with Linear Cylindrical Resonant Cavity (730A) of Figure (7-12), (NOW NOTICE THE LINEAR CYNRICAL CAVITY STATED) as illustrated in performance graph (810) of Figure (8-5). Greater Heat-yield of Flame Front (16)
is realized when Non-Linear Cylindrical Resonant Cavity (730C) of Figure (7-12) is used in
conjunction with Differential Dynamic Variables (820) of Figure (8-6) where (DYNAMIC ELECTRICAL STRESS) (RR' - SS' as to RU/RU' - STIST') is increased while the resultant gas pressure is allow to drop
during the gas ignition stage (E9d) of Figure (6-3) as to Figure (590) of Figure (6-2), as finally noted
by Energy Vector Graph (830) of Figure (8-7) under titled-line "Expanding State Space" (VS4).

Greater Heat-yield of Flame Front (16)is realized when Non-Linear Cylindrical Resonant Cavity (730C) of Figure (7-12) is used inconjunction with Differential Dynamic Variables(DIFFERENTIAL DYNAMIC VARIABLE)   

buzz you minus well just leave now with your tail between your legs..

outlawstc

[Spewing]

I think those numbers speak for their self!

If we had more people like me and less people like you,,, i think we would go allot faster....


You know what would suck,,,, No, better yet,,,, you know what would rule???

I think if the OLD DOGS came out and state exactly what they thought of meyers vic that they would highly piss you off, If those would just start posting and get off their bottoms they could change the way this technology works!

Get your asses out here and adjust these peoples attitudes, I'll back you all the way!

"i only speak for the wise" The ones that know what hogwash and whats not....


Stop looking for magic you fucktard,,,


None Combustible gases, Ambient air mix, Oil Droplets,,,, You'll fail to see what the mix was used for every time!! I will have to point that out to lol, WHY? because its common damn since! Get to work and

lay off the crack my friends...



I will be showing engines running on very low amounts of hydrogen, so low you'll have to see it to believe it, "I'll setup arrangements for visitations" cameras welcome with no hidden parts!

But, i must see some effort, some stuff you need to shelve because its not true at all.

What would you do if you invented an overunity device? Would you put anything that worked in a patent if it was worth millions? You have an entirely lot to learn about patent protection.

You want to know what i think you should all do with Stan's patents??? Burn em! there isn't one useful piece of information in them.



I am going to smack this technology's ass, and you're going to watch me do it!!!! Then maybe you'll listen,,, But buzz, its people like you that causes this technology to be the way it is, you need to step back take a deep breath and change your way of direction, if you don't you're going to wind up with your head up your ass along with lots of others.

Why did you cause such violence to me? I do not know if you are mib, an idiot causing problems, "and you caused me a shit load of problems" or someone with a chemical problem.... Whatever you are the clocks a tickin so i suggest you either understand me and what i do and how i work and realize that i do not stop until i have an answer.

1. I do not mislead people, I send out the facts at that given time that may later become invalid facts that aren't true.
2. When you test you're pron to make mistakes and give out false information, In any tester you will follow a trail of misleading information when they are making or is trying to make progress!
3. Each present day there are facts, Facts of the past could become misleading, but it is those misleading facts that cause you to keep finding new ones.
4. Facts lead to false information that causes you to find more facts which also becomes false, the end fact is a fact!
5. A misleading Paper Trail revealing how misleading you're or was in the past does not prove you was purposely misleading anyone, However it does prove that you was trying to make progress.

6. Everything i posted before this date is misleading, Everything i posted today is a fact!!!!!!!!
7. Everything i post today will become misleading, and tomorrow i will have more facts.
8. Make no mistakes, you'll make no progress,,, i show my work no matter the facts, others may see my mistakes and learn from it.
9. Those that fall together grow tall together!
10.Those that never fall never grows tall!

Have i fallen, yes many times! does it embarrass me,, Hell no, "I EARNED MY KNOWLEGE"

And about the ionization,,,, "My head was deep in the books when i pointed that out." And for brown gas to state it was already know was bullshit, when i created ionizationx.com there was not jack shit,,,, This website has grown since then! Oupower was dead as a rock,,, there was nothing..... It doesn't matter now because i've realized it was crap anyways, but it wasn't right because "i learned stan was doing that" when i got "very deep into his work." Besides the fact you have to have baking soda to get it to work lol,,, and how would i know that? hrm,, perhaps hydro didn't tell everything did he. I still remember loosing my sock when i ionized the gas, How i found ionization would take me 4 complete pages to explain, thats why i've never attempted it. Long story short, i was testing several things that effected gas and one day out of the blue i picked up my bug zapper and give it a go and it worked... I had forgotten about the debree of soda i previously used and that the water temp was a bit high. Stevie and me refused to tell any of you about it for "4 months" and finaly i released it anyways at procoent, "the top secret forum" and all hell broke loose after that. Thats how i came to realize stan was doing it, and thats what made me research shocking of the gas which later turned out to be what stan called ionization. Everyone was doing it ,it infested overunity like a virus, just like those vic photos that somebody got in deep shit for posting.. Good thing thats all the posted because youd go apeshit if you see stans,, ooop cant go there

Now look! This technology is booming.

Sometimes i wonder what it would be like if i never stepped foot in this technology,,, perhaps you'd overlook the fact that single cylinder engines can be ran on about 900 cc's a min... Ah, i forgot none of you can understand that,, "I'll have to yet show you how that's done to." unless someone See's my point and try's to take the credit yet again "After I've pointed out it could be done" and left a pretty good bit of information behind. Well,, they better move quick..


I suggest to ya something,,,,, If it sounds to good to be true thats because it probably is! Ask your dad! as your mom! Oh, i should have said "ask the wise." Nothing is impossible,,, anyone here know the secret to getting a "Pilot bushing" out of a pressure plate on some stick shifts? Well, you'd think that was impossible to if someone didn't show you how to do it,,, go ask someone how its done, only a few can tell ya.

Go ask someone how to run an engine on such low amounts of gas without using electronics,, sound impossible? well you're in for a ride because when you start calculating this and you start calculating that nothing is impossible,,, and to use 5 liters to idel any single cylinder engine is a complete "American Wast!"

This is why i have reason to believe stan lived with mexicans, that man must have saved everything,, "we need to be more like them, they dont wast." And yet, im not even going to comment on voltage potential,,, I told all of you on my forum over 3 months ago about that crack didn't i...

Hear me now, i'm far from done! Buzz,,, straigten up because when I go silent you can start wondering when i'm going to pop up next and what i'll be packing... The longer i'm gone the harder i'll crush this technology when i get back! You might want to add this post to your favorites,, it may be my last post for a while!

[Spewing]

And i'll even add a bit more to the confusion!!!!!!!!

Allot of you are talking about arcs in my fuel cell i shot on youtube, wondering if its possible......



Well,,,,, It arcs at the very bottom of the fuel cell, its rare! when it happens it POPS and its a very bright flash. Think i'm lying? Perhaps you'll prove one day i am not! I have done lots and lots and lots of test, there is no way i can comment on one particular video, but yes the vic is uniq, and it does exactly what stan says it will do, but it donesn't consume 5 gallons of gas per hour! One user reported that it was because "i hit resonance of the circuit and not resonance of the water."

Why did i test it, because i've gone to far not to, now i've tested it, i've hit resonance "of the circuit", i've gained HV directly across the fuel cell, and it dont consume 5 gallons of water per hour. Perhaps i did not hit resonance of the water. lol, whatever

I've placed flouresnet lamps in series with the fuel cell, "still produces and the lamp changes nothing!" Strange, Yes! was the pops and sparks i got strange, yes! do i feel like its worth persueing further? NO, why? Perhaps i know better, Perhaps Theres other things more important.

Does the circuit produce Free light? YES, when the light is on there is no effect in current from the battery, electricity can be drawn from the earth!

I've posted all my circuits, i made it CLEAR how important the "CHOKE CORE" is for gaining the HV across the cell, Its a TOY, play with it if you want.

[Grumpy]

This is pretty damn funny:

http://www.overunity.com/index.php?topic=6926.msg160813#msg160813