My Current Build

[AB Hammer]

Bessler007

This is what you wrote and obviously believe in. But the volume of your rep is LIAR  and here you admit it, for all you are doing is politics.
   
Re: Working Perpetual Wheel Using Springs
« Reply #63 on: February 24, 2009, 02:40:25 PM »

Here is a good lesson you might feel free to learn.  Don't try to speak to reality causing it to bend to your desires in the area of physics.  Politics is another matter.  That's an area where liars and thieves accuse others of being what they are and force everyone to accept their declarations with the volume of their repetition.

Your own words Bessler007
A person who is afraid of telling who he really is, hiding behind his handle.

I am Alan Bauldree, A person who is not afraid of telling who he really is.

only the liars.


« Reply #3 on: January 28, 2008, 05:12:04 AM »

Quote
5 years for Scott and the BesslerWheel.com congradulations.


Thu Nov 06, 2008 7:12 am

I am the guilty one that predicted 2008 as well as some others. But the year is not done yet. Wink

It is now.

Quote
May 20, 2008, 12:00:25 PM

My approach is like, WM2D means "Wood, Metal & 2 Days" (Ralph Lortie)

But when everything is this simple and ready. 15 minutes to an hour.

Just precisely what the fuck's the hold up?

Quote


Posted: Sat Oct 20, 2007 1:36 pm    Post subject: Here it is, Bessler's 12 ft wheel

Yes! this wheel will work. (No doughts) at about 20 rounds a minute. I am also building a 1/3 scale model that I will post by Christmas.

hello guilty ones.
Please, stop spewing alan out your ralph.




Bessler007
Cmdr, MIB

Now for your latest accusations

1. Simply being Optimistic.

2. This is out of context but it is not saying anything but a test.

3.Ah yeas the the Bessler's 12 ft wheel. A very good string to read.
http://www.overunity.com/index.php?topic=3503.0
I also still believe it will work. Just not with the shooters shown. and you posted on Bessler wheel as well, saying.

From Bessler007

Hello Alan,

I took a quick look at the wheel with that crutch wm2d. I set the weights on the rim at 3 kilos. They are reasonably well balanced as you say. I set the larger blue weights at 10 kilo. When the blue weights aren't present the wheel has a c. cw. spin with torque very close to the axle.

With the blue weights present the sys center of mass is where it's indicated. Probably worth a build. It does remind me of Georg's mouse on a tread mill wheel.

I agree with Fletcher that it's great you're willing to share the idea.

So what happened to that Bessler007 that use to hold good conversation and would put things to the test?

I truly feel enough has now been said.

[Pirate88179]

I have been on this forum for almost 2 years.  When I first joined, I met the original AB Hammer.  He was very helpful and kind to me and I even spoke to him on the phone several times.

Now I see this crap going on and I also see someone using a screen name very close to Alan's.  I also know that his person used to post here under a different name.

So, I am saying that, from what I know about Alan, and the fact that this other person has to resort to using a pseudo-copy of Alan's screen name to attempt to belittle him, I have seen enough and had to speak up in Alan's defense. (Not that he needs anyone to defend him)

I know Alan to be a good and sincere fellow and I believe the actions of this other person speak for themselves.

Bill

[erickdt]

I have been on this forum for almost 2 years.  When I first joined, I met the original AB Hammer.  He was very helpful and kind to me and I even spoke to him on the phone several times.

Now I see this crap going on and I also see someone using a screen name very close to Alan's.  I also know that his person used to post here under a different name.

So, I am saying that, from what I know about Alan, and the fact that this other person has to resort to using a pseudo-copy of Alan's screen name to attempt to belittle him, I have seen enough and had to speak up in Alan's defense. (Not that he needs anyone to defend him)

I know Alan to be a good and sincere fellow and I believe the actions of this other person speak for themselves.

Bill

Agreed.

Bessler007, what kind of miserable loser are you that you have all of this time to dedicate to trying to tear someone down just for the sake of tearing them down? I've found that people who engage in such activities are usually deeply self-consious and lack any self esteem. Because of this they project their poor self image on others in an attempt to make them feel better about themselves. Pretty pitiful really. What's wrong Bessler007? Did your parents make you start doing chores in lieu of rent for that basement apartment you've been living in?

[Bessler007]

This declassified document just came across my desk.  It's been stripped of all the sensitive (ie:  whinny bitch ass comments) leaving only the intelligence (sensible comment/question) worth addressing.

erickdt, I'm glad you asked.

A certain subject who has been classified as “having s e x with acorns” was sucking up to his mentor with this tripe:

You got it wrong. Ralph has been at this for around 50 years so he sits in the teacher's position and there are others here who also sit in the teacher's position. Those of us who are fresh at this game need these teachers and need to understand and respect there experience. Now! don't start calling me the teachers pet either.

This led to an investigation of what was being taught.  We uncovered the teaching of this tactic; when the pm “researcher” makes claims then have their feet held to the fire they crawfish.  This was the mentors initial claim:

We assumed that after running for five days, we had surpassed the several hour test...

After having his feet held to the fire by several “stray dogs scratching on my door” in his words he employed the tactic of crawfishing with this:

I did not view the wheel for five days, it is approximately 2,100 miles from my abode.

We suspect that abode is under some rock out west.

Apparently the actual fraudulent wheel was situated at his spam-sucking trailer trash assistants abode:

He lives in a trailer park and privacy is at a premium.

The most significant thing this survivor of a conscience-ectomy  said was this:

How do you feel you can help me achieve what I want or need. I need finances for better material to build with and some tooling replacement.

Red flags go up immediately when pm “researchers” even hint at needing funds.  This mentor is a lay-about with a working wife according to last reports.  Quite shiftless.

besslerwheel is usually rather punctual at banning frauds of this sort yet this particular one of the mentor,  his assistant and student must have escaped their notice.




Bessler007
Cmdr, MIB

[BAHammer]

Agreed.

Bessler007, what kind of miserable loser are you that you have all of this time to dedicate to trying to tear someone down just for the sake of tearing them down? I've found that people who engage in such activities are usually deeply self-consious and lack any self esteem. Because of this they project their poor self image on others in an attempt to make them feel better about themselves. Pretty pitiful really. What's wrong Bessler007? Did your parents make you start doing chores in lieu of rent for that basement apartment you've been living in?

  eric,
What Pirate Bill has left out is that Alan wanted to meet us. me and Bill both live in Kentucky. Alan wanted us to travel to Mississippi. Needless to say, the meeting never took place.
I can also pull up posts where Alan said I'll need to learn to dance for the public and I didn't know what he was talking about.
What he was talking about was he was trying something along the lines I was discussing. This way, if it works, he'd give credit where due. And if it doesn't, he's safe from having tried something by saying I don't know what I'm talking about. I call that walking on both sides of the fence.
One way he does this is by saying I said something about Mt 24. And what it is, is he is wanting me to clarify something for him. Instead, he should be willing to do what everybody else in here does and be willing to discuss things.
He has said several times that i want him to build for me. Nope. he's not a carpenter. And Bessler said it would take a good carpenter. This is where Alan flatters himself.
In reality, to do a decent build, it only takes a s aw, drill and some hand tools. Most of the wood that would is already cut by a mill to precise dimensions, ie. thickness, width, etc. That would be the most important part. What is more important than that is understanding the engineering. And this is where someone trying to jump the gun and build before the engineering is properly understood creates problems. They need to say it won't work for a vague reason (keel effect) while wanting something they don't understand put into terms they can work with. Playing both ends against the middle doesn't work very well.
Myself, to my discredit, have discussed my builds openly before I built them. And Alan knows that when i discuss i9dea's that I will do abuild on them. So why as in G-Force did he keep telling me that he proved wheels like Mt 24 were proven to be non-runners by his build ?
If you ask me, he was trying to figure out how to build it. As he put it, he is like Bessler and in time will reveal his secrets. Which his secrets will also require me to learn to dance for the public.