Stanley Meyer Explained

[h20power]

What did you want to get? Wanted to get hydrogen from a high-frequency field? Then it is necessary, like Kanzius, to use a strong field. "Flame Discharge"
https://www.youtube.com/watch?v=SyZuel2iaBk
https://www.youtube.com/watch?v=quXa90HojfM
https://www.youtube.com/watch?v=-AQmaAEyTic
If the terminal is wetted with salt water:
- place the electrode in water, or
- put a cotton swab moistened with salt water on the terminal, the length and brightness of the discharge flame greatly increases Water ionizes and decomposes, but at such temperatures it burns again.
The increase, if there is, is small.


In general, how much gas addition did you want to get with conventional electrolysis?
0.3% can add a high-frequency field to the required energy consumption for conventional electrolysis.
Can you measure a 0.3% increase in gas yield?

It is likely that in electrolysis with a very low DC voltage, at which there will be a very small gas yield. It is desirable to create a vacuum for better separation of oxygen and hydrogen. But I suppose that with this method, the percentage of the increase will also be small.
For quick monitoring of hydrogen production, I recommend using a hydrogen sensor like this Arduino small module on base MQ-8 or better, :
https://www.youtube.com/watch?v=x9zi7mYDTIQ
This Arduino sensor module works without Arduino.
An ordinary voltmeter and a 5 volt power supply from a mobile phone charge are enough.   
The sensor is of course cheap and not very accurate.

We need to find another way, how to turn 0.3% into 300%

Hi Sergh,


I went over all of these videos and can say other than the last one they have nothing to do with this technology. You are basically taking an unknown and tossing it in another basket of unknowns hoping for a solution. Why not just follow what Meyer did? Don Gable gave everyone the correct size of the water capacitors which I will repost. This guy in this video gave a good circuit to try and make use of [size=78%]https://www.youtube.com/watch?v=fAvH90dqn78[/size], and I gave the science behind the the technology away for free many places in this thread but I will re-post the pdf file in this post once more.


Just as those videos you post show things being difficult to tune so to is this technology but you must first follow the simple circuit diagram Meyer showed in his technical brief of this technology. The switch you choose is very important and I already posted a video showing why that is as the blocking diode being used in this fashion is acting as a automatic switch. The technology does produce a AC waveform but it doesn't flip flop the voltage potentials on the plates of the capacitor thanks to the Blocking Diode switch the plates of the capacitor maintain one charge on them thus allowing this voltage intensifier circuit to mimic a thunderstorm. This is how this technology actually works and it's been given to everyone whom takes the time to read this thread for free.


I have no idea why people keep trying to toss in some other technologies in with this technology when I have went out of my way to show the actual science behind this technology so that it is no longer a UNKNOWN! The VIC circuit is the solution towards mimicking how mother nature breaks the bonds of the water molecules. One must follow all the rules for making high voltage transformers as well as follow all the rules in dealing with high voltages.


So, please stop trying to add in anything else to what I have already went over in this thread as it just confuses people.


Shalom,
Edward

[kolbacict]

Thank you. But so no one answered by what mechanism the water molecule divides?
Most likely, the proton   will be separated from oxygen together with its electron.
Because there is no electrode similar to conventional electrolysis.
That would discharge the ion ...

[lancaIV]

kolbacict : beginning with https://en.wikipedia.org/wiki/Chemical_bonding_of_water


+ agent ? https://en.wikipedia.org/wiki/Electrocatalyst


Pressure,temperature,.....

[h20power]

Thank you. But so no one answered by what mechanism the water molecule divides?
Most likely, the proton   will be separated from oxygen together with its electron.
Because there is no electrode similar to conventional electrolysis.
That would discharge the ion ...

Oh, I answered your question and then some. What I posted comes with two examples of the water being broken down in this fashion by way of getting at the atoms electrons to break the bonds of the water molecules but I guess your just not up to the task of understanding this technology even when the science is fully handed to you complete with examples. I even gave you a brand new theory for use in understanding this technology one that can't be found in the science books yet. That theory allows one to find other things that break the bonds of the water molecules by way of taking the electrons away from the atoms that make up the molecules they go to form as there are far more than just two examples I could have given you as you just have to ask the right questions.


The water molecules are being broken down just as I have shown they are being broken down in that pdf file as mother nature does this all the time but the problem is no one ever ask her how she does it until now. "How does a plant break the bonds of the water molecules?," is a question no one has ever asked before. When you study Photosynthesis you will see no one is concerned about how plants break the bonds of the water molecules but only what a plant does with the electrons it takes from the atoms as that technology can make those that invest into understanding that a lot of money as they can do as they are doing right now and create solar fields to harness the energy from the sun to be sold to the general public. Solar panels is the technology they sought as there is much profit in it for them. They simply had no interest in understanding how plants break the bonds of the water molecules and from the looks of it nor do you and a lot of other people that come to read and post on my little thread.


I'd be more understanding of everyone's ignorance if I didn't give any real world examples but I did give some real world examples which leaves me confused as to why no one gets how this technology actually works?! I know someplace in this thread I even took it further and gave two or perhaps even three more examples of this type of water decomposition taking place. So, I must conclude that none of you truly want this technology as your actions seems clear to me that you all simple do not want this technology and as the old saying goes, "Actions speak louder than words."


So, just to be clear. I believe in this thread I have given four or five examples of water being broken down into it's component atoms in this manor, and yet somehow that's still not enough proof that what I am saying is correct and true. But I think I understand the true reason why and that is because I am poor as this capitalist system that has swept the globe tells you all not to listen to those that don't have a lot of gold. If I was Elon Musk telling you this I'd be willing to bet you all would totally be listening to what I am saying but since I am but a poor old man the system of capitalism tells you to simple push me off to the side as because I don't have loads of cash I simple have nothing interesting to say. This I feel is the hard truth of our reality right now as capitalism is all you truly know and you believe in it's principles and thus exalt the greedy and put down the needy. Making prey of the poor is your favorite pastime.


I was going to post one of my old unpublished videos but I have changed my mind on that as I think I have shown enough of what I am doing to the world for now and will make new videos after I get the machines I need to move forwards. I might share and then again I might not as I'm not into Open Source as that's a failed strategy in my humble opinion.


Shabbat Shalom everyone [size=78%],[/size]
Edward

[kolbacict]

And I will give you many ideas for free. 
Today it occured to me. But look what I came up with.
If  are your kilohertz by Mayer
do directly in water by the beating frequency method.
mixing higher frequencies.