Howard Johnson Replication Tube Claim

[powercat]

@all
  new vid from mylow
http://www.youtube.com/watch?v=dXaaw63l520
cat
all mylow /Projectmagma videos
http://www.youtube.com/results?search_type=videos&search_query=Projectmagma&search_sort=video_date_uploaded
and his cat trying to get along with his bird [cat lost]
http://www.youtube.com/watch?v=dy6qRZdTJRo

[queue]

The M646's are from some Chinese company. Queue never answers that question but it was covered a few pages back. Sterling is working on getting some, someone else said you can contact the co. directly and they'll sell them for about a buck a piece I think.

The company is a magnet manufacturer not a retailer . .the guy who sold me the magnets did me favour as they do not normally sell to the public, the only reason he did so is i already knew him.
i respect his wish that i do not give out their Contact info.

When Sterling asked me about these magnets i called my contact and asked him if he minded that i gave his name to Sterling who then puchased the remaining inventory to send to Mylow

Anyway the question is moot.
The manufacturer who is situated in the USA does not currently have any inventory of this item.. they can however run a batch - lead time 4 to six weeks which is what Sterling told y'all.

Cheers
Q

[queue]

@queue

Were did you get them M646s. lol
What is the spec on that, like pull, etc.

Hmm not sure about the pull spec - they are Alinco 5

If you have too many, do you want to sell some. Maybe go halfers. lol
You can PM me if you have interest. I'm in Terrebonne. My brother lives in NDG.

When i ordered it was because i wanted to build two platters .. which i did..  the second one arrives Friday .. latest monday .. so i pretty much need all the mags i purchased .. Sorry 

My friend that has a water jet cutter has told me I have till end of the month cause he will be selling his cutting table. He has lots of AL plates from 3/8" to 1.5". I will get him to cut me a disk of 18", 1/2" and have another guy put in the groove I designed to permit the rotors to quickly position themselves.

When you consider Mylows upright channel rotors with stator in front, and his flat placed bar magnets with stator pointing downwards, you can understand the commonality of these two approaches are generally the same. Must mean something.

if it works i guess we will have to figure out afterwords whats really happening ..  Maybe some really smart people already know that .. or i think maybe theres a few already preparing their theories..
Guess we'll find out soon enough.. 

i got my new stators today too so i'm ready if Mylow can show me the config that works ..  we have the same mags and pretty much the same disk size.

Cheers
Q

[wattsup]

@queue

Thanks for the clarification but can you muster up any specs on those rotors since Mylow will be using them also, it would be good to know what the pull rating is. I saw the dimensions you put up on the other thread. If there is no pull spec, we should devise a standard method to see how much lift they can have. Guys are running blindly with so many channel magnets out there it is easy to get knocked out of the ball park even before you start. So some specs would be good.

Added: Just saw your second post.

Regarding the pull spec, if there is none, try and see if you have any good quantity of screws, or washers that you can stick the rotor magnet into and pull up as much as you can, then weight it. Then let us know what you used and how much was lifted. This will at least give us some idea.

I spoke today with my metal shop guy and there is no problem for him to make a nice groove on the inside edge of my future wheel. It will be 18" dia. and 1/2" thick, it will have a 1" shaft and the base will be dual bearing loaded.

Oh, if you read @Sterlings last post, he says Mylow was putting the rotors in segments of 4 with about 2" between segments.

[B.Lane]

I'll probably mention Mylow in my presentation, even though we don't have independent validatation yet.  As I mentioned a couple of days ago, I saw an increased slow-down time in one configuration I did.  Control: 58 seconds; my config: 75 seconds.  There was some king of assist going on.

FYI, my batteries are almost dead, so I'll not have access to my computer for a couple of days.

Sterling

----- Original Message -----
From: [PMMTestser]
To: Sterling D. Allan
Sent: Thursday, April 16, 2009 6:53 PM
Subject: Mylow 7:30 PM CST 4/16/09 update


Just talked to Mylow. Figured I would give him some time before calling because of his work load.
It was 7:30 PM Central time. He said it had been a busy day and he had not worked on the motor yet.
He thanked me for sending the digital tachometer. He said he needed to go get a 9 volt battery.
He understands the important of getting the motor done but he is quite busy at work this week. He doesn't want to get worn down again.
He mentioned two people came to work today at 11:00AM looking for him. They saw his boss who said that he was out making deliveries.
The boss said there was a male and a female and they were both dressed up. The guy had a briefcase. He said they showed his boss badges and said they looked like FBI badges. After that they left.
I don't think I would mention this on the internet. If you talk to him see how it plays out.
He said he would call me later and let me know his progress.


The FBI