Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[Сергей В.]

Now as i have promised couple month before some Disclosure of Well Hidden and Forbidden facts from deep mankind past especially on west by JEWISH ILLUMINATI CABAL.


Russia 1992, in the Ural Mountains couple of Russian geologists accidentally discovered what would later be known in Russia as RUSSIAN "NANO SPIRALS".

The discovery of the Russian nano spirals, or more correctly miniscule spiral-shaped objects, was made while investigating mineral deposits. The artefacts were made from copper, tungsten, and molybdenum. The objects have been scanned with Scanning electron microscope CamScan-4 with X-ray microanalyser and have different size from the largest that was about 1,4mm to the smallest which was only 2,54um with very narroow axial grooves in nanometer dimesions. Diameter of springs was 1 mm.

These curious findings bore an eerie resemblance to the control elements used in recently developed "nano-machines"all of the pieces were found at depths 12m, embedded in gravel and detritus deposits. These deposits corresponded to the lower region of the Mikulinsk Horizon of the upper Pleistocene Era, suggesting that the objects themselves may be around 100000 years old. There is no possible way such objects could be embedded so deeply without having ancient origins.

All of the objects appear to be manufactured as no type of natural process known could explain their creation.

How our ancestors (humans) 100,000 years ago would have been able to be technologically so superior to such a high degree as to be able to create them is unknown (or held in mega secret). As you can see with own eyes, this mysterious discovery evidences that our ancestros (humans) may had been technologically so more advanced than we are now or are the objects evidence of extraterrestrial contact of our Ancestors from many planets in SVARGA.... on the Slavonic-Aryans language  Milky Way ?"

Conclusions make yourself !! These are only milli-milli % of Real evidences which exist till now and very probably will be Disclosed and Presented to whole Mankind in the nearest Future !!

ps: More Interesting and never published evidences and artefacts from deep past you can find, read and learn on our site:

Пища Ра – рассказ о древней цивилизации наших предков
Древняя цивилизация Cлавяно-Aриев – возврат из забвения

http://peshera.org/khrono/khrono-03_2.html#03

Peshera - The story of Ancient civilization of our Ancestors - Ancient Slavonic-Aryan Civilization .... RETURN FROM OBLIVION !!

http://peshera.org/

ps2: I purposely did't told "histroy" i.e. "his (Jahve) torah" coz the complete HUMAN PAST had been falsified and hoaxed from not so much time ago (200) years when Alien attack had occured and the bigest state of that time THE GRANDE TARHTARIA- had been wiped out (1775-1776) from the face of this planet.  {Take a look on JEWISH ILLUMINATI CABAL DOLLAR - find the printed year from the past}.

THE GRANDE TARHTARIA - The State of our Ancestors have had a Giant territory  - Complete Russia - Central Asia - Alaska - Canada and North America in one and with one Slavonic-Aryan language. Imagine how big had been that land !! And happily still exist many evidences of massive nuclear bombing on the whole territory !!
As always i have a proofs for every word i told you !!

There is only one question: "Where we living ??". Maybe in Hell ?? Think about !!

[elementSix]

Just a repost for people who missed the one that got posted out by Race Traders.  What kind of person works to keep the planet in CO2 saturation at very high levels that would lead to the destruction of their own Race.  Unless they aren't human.  To work everyday, knowing that you are fighting the only few people on this planet that want to save the Earth and all Future Generations from total destruction at the hands of the most Evil Beings in the Universe.  Maybe we do deserve to be wiped out.  If we would do this to ourselves, knowingly and willingly.  What would we do to other races, given the chance??  Sick people working to take everyone with them into darkness.  The problem is the new humans that are evolving from us.  They are bright lights at the end of the tunnel.  These Star Children, Indigo Children.  The ones who can read the energy put out by words with their feet and hands, without looking.  How cool is that?  They are deeply creative and loving toward the Environment and other Human Beings.  With a dislike for humans, whom are vastly below them on the evolutionary scale.   
   Here is a pic I posted the other day.
  As for using Thyristors in a free energy setup..  I think I covered that question with the use of Thyristors in CDI and also for use with Impulse Discharges at large Voltages and great abruptness with those impulses...

[johan4el]

Dear johan4el.

As I am "very deep" into this particular project I felt I should tell you that this is not the inverter circuit but the main transistor drive circuit. I am almost certain that the circuit posted below cut from the Dally schematic is very similar, the only difference being that the HF filter choke coil has been placed on the board. I have also posted the driver circuit that I am using at present.

The inverter is a seperate and appears to be a commercially made unit. Seen in the bottom LH corner of the Akula device base board. It appears to have a transformer based output.

I hope this information is of use?

Cheers Grum.

Dear Grum ,,,
thanks for u schematic ,, I look some part is cap 50v 2200uf ,and IR2113 or IR2110 because I see on this picture closely its look IR211x, the last code are hidden  and the choke 9 turn and maybe 18 turn for all choke ,,other part unknown value ,,,I must look the other way ,if we know all the part ,,,I thing we can draw schematic same as akula do ,,

[dllabarre]

Just a re-post for people who missed the one ......
   Here is a pic I posted the other day. 

elementSix


Do you have a working device based on this pic you posted?


DonL

[elementSix]

elementSix

Do you have a working device based on this pic you posted?

DonL

Yea, its not the best because I used a mechanical circuit controller for the Impulse discharges.  I won't have a good working device until I get some money to buy a few old style CDI's an see which ones will have the Impulse I need.  If you want to make an energy conversion device like this one.  If you stick with the 3 or 4 basic requirements for the Impulse wave formation, then you will get it to work.  It's not to reliable the way I make it but it works.  I posted a pdf link the other day on Impulse waveform Circuits.  It has good info on making them, but I want to use the Thyristor or an SCR for making the HV DC impulse train.  Thats what is used in the older CDI's (Capacitor Discharge Ignition).  Thyratrons work great for use in cars when they tried them in the 50's, but it needed a warm up time and they weren't very good at high RPM rates over 5000 RPM's.   Plus the Thyratron used a Vacuum Tube for the impulse trigger and TK said in his Turkey demo of 100Kw device that Vacuum Tubes were the best to use in his device, but they didn't last very long.   So stick with using Unidirectional impulses, Very Abrupt rise and fall time,  High Voltage DC only cause AC won't work for Unidirectional pulses.  I believe but am not totally sure that the use of amps should be very tiny or none at all.  Resonance is very important for a reason and I believe that is the reason why.  When in resonance there should be little to no current being used in the circuits.  I could be wrong but It must have something to do with it.   When I get a few extra bucks I am going to buy an Arc Discharge Lamp to use in making my disruptive discharge circuit.  It has some weird effects and taking all the current out of the DC input is one of them.  I think it might help in producing a much stronger Radiant effect.  I guess I'll find out when I get it.   I used the balance beam to create a resonant setup with my coils and discharge circuit.  Worked fine.  Try it, its not a lot of money and most parts you probably already have.   HV DC supply, spark gap, copper tubing, ground wire, hv capacitors.  Those aren't hard to find.  In my new setup I want to try a stun gun as my DC supply.  It has HV and it runs on a 9Volt battery like TK uses.  The impulse wave is best when its basically straight up and down like this bedini impulse from the monopole motor pic below..  I wish you luck..