Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[epwpixieq-1]

Hi,

Below are several observations about Kapanadze's device and Tesla's patents for power transmission through the natural mediums. In short, these observations tend not to support overunity (overunity is not the correct word, the energy/vibrations always come from somewhere, ether, zeropoint energy, or whatever you would like to call it), but point to a direction of a device that is able to extract energy/vibrations existing in the Earth, a natural medium for storage and transfer of electrical vibrations.

It is my view that Kapanadze devised a Tesla sensitive receiver ( with transistors ). Here are the facts:

Some observations based on Tesla's patents: 787412, 645576, 649621, 685953, 685955 - all concerned with transfer of electrical energy through the natural medium, that in my view, explains well, the principle of Kapanadze's device.

The 787412 patent is derived from the others and is treating specifically the transfer of energy via ground vibrations (note that this patent is quite older then the rest, about 4 years). The transmitter is based on  645576 and 649621 patents, and the receiver on 685953 and 685955.

In short 787412 patents gives the basics for the Tesla's "System for Transmission of Electrical Energy Through the Natural Mediums" and currently known as Tesla's "wireless" power system. In my opinion, the current title is actually misleading. There is a WIRE and it is a BIG one.
In the patent 787412, the Earth, is the wire in the system, although in the previous patents, Tesla states that the air also could be used, under certain favourable conditions. Anyone reading carefully the patent will be able to understand that.

Tesla states, that via an electric vibration generator(s) one can establish standing waves in the Earth and tap, with a receiver, such waves, from any point on the planet. And this is seems to be the principle of Kapanadze's device!

The receiver, explained in 685953 and 685955 patents, has two ground plates and two mechanical (on one common cylinder) resonant adjusters/lockers. There is a ton of important info mentioned in the patents. For example the distance between the ground places plays a role in the length of the waves being captured - 1/4 of the wavelength, in this way one can capture the max Voltage potential, of the standing wave. The other is that the rotational speed ( equalized to frequency ) on the cylinder where the two adjusters are mounted will have to be regulated in order to tune/lock on to the best resonant frequency ( and with that on the wave length ) for capturing maximum power out.

In my opinion,  Kapanadze's device (KD) is just the Tesla's receiver (TR).
Kapanadze states: "I did not invent it, I just found the resonant frequency". Exactly!!!

First the facts: KD has 2 grounds ( sort of a plate and a pipe ), 2 adjusters ( transistors ) and a capacitor as TR - this is a quite a reviling info.

The 2 grounds will be able to capture well the potential of any standing wave (and harmonics), existing in the ground, with 1/4 wavelength, equal to the distance between the ground points.
The transistors are used to adjust and lock on to the best frequency to capture. Given the distance between the ground plates, probably there are several frequency that can be locked on. One fundamental and the other are harmonics ( Tesla also notes this in his patents ). I am not sure if the fundamental will be the best one to give the highest power output factor, but this can be easily decided/experimented with a viable device.
In this light, Kapandadze needs only initial power source in order to tune his receiver, via the 2 transistors, to the best power providing (standing) wave naturally existing between his 2 ground points.

The major question is where the energy waves in the ground come from. On that question there may be many speculations, but one of them, clearly can be stated as truism: on average the Earth is being hit by 100 lightening discharges per second. These electric power strikes/hammers, will set up waves (and probably standing waves) in the Earth medium. Beyond this view there could be many speculations for other sources of naturally occurring vibrations that are beneath our feet ( and above as well ).

I decided to share this my view, and put it out for speculation and if someone is interested to try, or even, criticize it.
Hopefully, with time, I will have opportunity to put this idea to practice.

Best wishes for the coming New Year to all.

[skaarj]

Thank all of you for your support I can not even  list all of the names to many of them in all channels and all media
You know your names:)
O boy...
I did not expect so much of public appreciation I do not even  think that I deserve it all.


Wesley

You and your team DO deserve it all, my dear Wesley, because you and your team did something - you opened eyes and enlightened minds.
People who work HARD will always be appreciated by other hard-working people. You also have an extremely warm heart. Thank you.
Please remember - those who talk shit here, their head is full of it; no mathematics, no physics and no engineer feelings - an engineer must search and must not stop when traditional science says it is impossible.


Overunity has been proven by the legendary Nicola Tesla. In his experiments he managed to pump energy back to the generators at Niagra Falls - those generators received more than they pumped and they burned. That was the official report. The man did it, and others did their best and tried hard to make us forget this and to make all of us be lazy and stop thinking. It can be done. Your team made one step closer to prove it once again.


So don't get angry on stupids - because crap will always stink from all that dream of huge money. Money is the eye of that Unholy being, cursed be his name forever. Stupids with money in their heart will always be cursed and will always curse others. Your heart does know only kindness, as a few other people here. I read all the 150 pages here, since your first video to this last post. Don't give up. I will be back with results, as the others did.


All equipments are on their way. I will be limited at 2MHz by those USB (PCGU1000) generators? So what, I can multiply it using two small transistors or - my favourites - 6Zh1P + 6P14P. Also I asked for that particular yoke from the colour Rubin TV streight from Russia. I will also work with the core from Rubin-102.
After all the measurements and tests, I will build three synchronised signal generators using vacuum tubes (50Hz + kilohertz + megaherts).  Tell me if you saw any 40-years old TV set on transistors to run perfect in this day. Vacuum tubes can be made using technology back from ancient Egypt or ancient Persia. There are reported experiments of tubes without glass, but with electrodes mounted in methan-gas flames. If you wish the yoke device to work forever - without any malfunctioned generator due to transistors - this is the logical step to follow.


Also - for your team and for others familiar with soviet technology - please try the high-voltage transformer from Rubin-102 (6P13C final stage), I never saw any of those transformers burned. I noticed some discussions about burned transformers. Did that e-bay seller mentioned his products are made in China with cheap materials?


I am thinking of using two of the holders for the anode of the rectifying diode (1Ts11P) for mounting the spark-gap on the Rubin-102 high voltage transformer to avoid any other complications. Do you agree with this idea?


Keep the good work. Ideas and contributions will come from all people with warm heart like yours and no love feelings for money.


Does not matter the name of someone, or the method used - the final goal is to get that feeling - that we can cook our meals, warm our houses and run our automobiles using a derivation of the original yoke experiment + some small batteries made from copper, zync and... potatoes, oranges, tomatoes. And without batteries in the near future.


Keep it going.


[skaarj]

[itsu]

@ all,

after solving the input filtering (by only using a capacitor to cancel the RF on the batteries) in my previous post # 9842 on page 657, i now am trying to set a baseline output measuring method.

I use a bulb (220V/10W) and an RF meter and find in this first setup that i have about 2W RF coming out of the 3th coil.

Video to be seen here:  http://youtu.be/WH2BI6bZsAg

Next i will try various coil combinations with and without ground to improve on this base.
It is obvious that at this moment the system is running with very poor efficiency.


Regards Itsu

[woopy]

hi all

thank's to all contributors and specially to Znel

here my 2 more cents

hope this helps

good luck at all

Laurent

http://youtu.be/UhY-mghT3M4

[hartiberlin]

Hi Woopy and ALl, well done !
You need to put more than 2 turns of your big wire coil in there, so you reduce the input power. Maybe then you will draw less input power.
Maybe scale up from 2 turns to 20 turns and measure again the input power.
How will it change ?



please also try to wind the 20 turns like this coil amplification video shows:
http://www.youtube.com/watch?v=yaXiXz5LpP8
Maybe it will have a special effect.
One guy made a Skype conference with me and told me, that such
overlapping windings really have some amplification effects !
Maybe you try this out ?
Many thanks in advance.
Regards, Stefan.