Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Started by Pirate88179, June 27, 2009, 04:41:28 AM

Previous topic - Next topic

0 Members and 205 Guests are viewing this topic.

wings

Quote from: Bruce_TPU on May 28, 2011, 04:41:18 PM
Ok!  So, like I had it yesterday.  A good place for folks to begin to experiment, I think.

Those links were more for others to see how easy ozone production is.   ;)

Cheers,

Bruce

this is close to the Tutanka device:

http://www.energeticforum.com/renewable-energy/7995-sell-plans-reactor-fuel.html

"1- I have named MHD tesla because in fact I have extracted energy from air"

http://www.energeticforum.com/renewable-energy/5400-tesla-air-mhd-electrical-generation-device-2.html#post130301

"Tesla use radiant energy name for protect what have understand.. Radiant energy = free electrons. HV capacitors are electron batteries and electrons are released in secondary load circuit. Isn't present voltage potential but only pure energy. Don't exist DC or AC field but ONLY pure energy. Tesla have found that, using high voltage at high frequency and capacitors you can have access to an next energy level.. pure energy current without voltage. Tesla have found also that for increase efficency is possible change arc discharge method and use high voltage/high frequency directly on molecules like air for obtain more free electrons. More free electrons more pure energy. You don't obtain any shock because in fact you obtain only an natural energy source. You can see that from Tesla Radiant Energy youtube video, you obtain two electron flow and you can summ these with an electric short circuit.
Hairpin circuit in fact is ONLY an electron loop!
Dr. Aspden have designed an special generator, no more different from Hairpin circuit, the main difference is that use tubes (and air) but you can replace DC power with AC every using high voltage and high frequency.. in all case you need to "tune" the tubes for obtain free electrons from air (and also Nox and Ozone) but you can use ONLY nitrogen and you can re-use that more and more times. Important thing.. you need NO EARTH in your circuit or your electrons go out from there."




Bruce_TPU

Quote from: wings on May 29, 2011, 04:02:11 AM
this is close to the Tutanka device:

http://www.energeticforum.com/renewable-energy/7995-sell-plans-reactor-fuel.html

"1- I have named MHD tesla because in fact I have extracted energy from air"

http://www.energeticforum.com/renewable-energy/5400-tesla-air-mhd-electrical-generation-device-2.html#post130301

"Tesla use radiant energy name for protect what have understand.. Radiant energy = free electrons. HV capacitors are electron batteries and electrons are released in secondary load circuit. Isn't present voltage potential but only pure energy. Don't exist DC or AC field but ONLY pure energy. Tesla have found that, using high voltage at high frequency and capacitors you can have access to an next energy level.. pure energy current without voltage. Tesla have found also that for increase efficency is possible change arc discharge method and use high voltage/high frequency directly on molecules like air for obtain more free electrons. More free electrons more pure energy. You don't obtain any shock because in fact you obtain only an natural energy source. You can see that from Tesla Radiant Energy youtube video, you obtain two electron flow and you can summ these with an electric short circuit.
Hairpin circuit in fact is ONLY an electron loop!
Dr. Aspden have designed an special generator, no more different from Hairpin circuit, the main difference is that use tubes (and air) but you can replace DC power with AC every using high voltage and high frequency.. in all case you need to "tune" the tubes for obtain free electrons from air (and also Nox and Ozone) but you can use ONLY nitrogen and you can re-use that more and more times. Important thing.. you need NO EARTH in your circuit or your electrons go out from there."

Hi Wings,

Yes, I suspect very similar.  But it sounds like his reactor is recombining molecules to produce his micronic fuel, that he claims will burn better then gasoline.

This concept Shokac and I have been speaking of is similar in some of it's regards.  But no need for water, salt, nitrogen filter, etc.  But, I had actually suggested nitrogen earlier because of it's atomic number is lower (7) then that of oxygen and would actually work better.  But the cost of the filter etc, makes common air much more attractive.

The only thing needed is HV, and HV is cheap.  Not much amperage required.  And the output is indeed amperage.  So, if you have 300 to 400 volts DC on your positive plate and add that amperage, you are left with a heck of a lot of wattage.  What I LOVE about this concept is it is so close to the way the TPU works, though the PROCESS is completely different!  Very cool stuff!

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

wings

Quote from: Bruce_TPU on May 29, 2011, 08:14:40 AM
Hi Wings,

Yes, I suspect very similar.  But it sounds like his reactor is recombining molecules to produce his micronic fuel, that he claims will burn better then gasoline.

This concept Shokac and I have been speaking of is similar in some of it's regards.  But no need for water, salt, nitrogen filter, etc.  But, I had actually suggested nitrogen earlier because of it's atomic number is lower (7) then that of oxygen and would actually work better.  But the cost of the filter etc, makes common air much more attractive.

The only thing needed is HV, and HV is cheap.  Not much amperage required.  And the output is indeed amperage.  So, if you have 300 to 400 volts DC on your positive plate and add that amperage, you are left with a heck of a lot of wattage.  What I LOVE about this concept is it is so close to the way the TPU works, though the PROCESS is completely different!  Very cool stuff!

Cheers,

Bruce

some pictures it works also with radioactive materials ......

http://peswiki.com/index.php/Directory:Resonant_Nuclear_Reactor

http://www.rexresearch.com/nucell/nucell.htm




Shokac

Quote from: wings on May 29, 2011, 08:38:31 AM
some pictures it works also with radioactive materials ......

http://peswiki.com/index.php/Directory:Resonant_Nuclear_Reactor

http://www.rexresearch.com/nucell/nucell.htm

Wings, I try this, but if you wont polarized electrode positive & negative, you need very strong electromagnetic field. Energy for create very strong electromagnetic field is HI. And you don't have OU device.

AbbaRue

About Light bulbs.

I read somewhere that they used to use Argon in light bulbs but modern light bulbs are filled with pure nitrogen.
Once you remove the oxygen, the nitrogen doesn't react with the tungsten, and it's dirt cheap. 
The only bulbs using an inert gas are those halogen bulbs, and the outer glass tube is actually quartz crystal.

I'm glad to see this thread has some life again.  I spent quite a bit of money on parts for this project. 
I hope we finally see a breakthrough replication soon. 

I also spent months experimenting with the Correa's Argon abnormal discharge tube.
I got 2.5 times as much output as input, but for some reason the tube works for a while and then stops.
I also tried Heleum and it works too.  But again the tubes I built only work so long and then stop.
Then I have to re-vacuum them out to get them working again. 
I can give more details on my setup if someone wants to build there own.