Hairpin Project

[resonanceman]

Actually loner,
If you don't mind I would like to know more precisely to what you are referring.

1- How are you making an EM boost on the quench field.
And what is the quench field?

2- How do you force a field between two already formed fields?

3- What method are you using to measure your tuning via EM strength?

4-  please identify the "shorted" loop and the "isolation caps"

thank you,

jeanna

I  think I will take  a shot at some of those questrions

Loner ......please correct me if I am wrong


Tesla  used  magnets  to force his  spark gaps to quench  faster.
Loner  is using  an electromagnet for a similar function.
(Great idea  ) 


The  shorted loo[p is the 2 bars of the hairpin  when the top bar is in place ....the top bar shorts  the 2 vertical bars forming  a loop.

The isolation caps are the things " stuck " to the bottoms of the vertical rods

```````````````````````````````

I have a question........

Does anyone  have  any theorys about why  the top bar  does not short out  the radiant energy? 

I remember  a comment  about  how the vertical bars  have to be heavy and that the bars are not a place to scriomp.

I also remember   in a Bedini  circuit  a particular wire had to be heavy ti carry the radiant energy.

It seems  that  radiant energy  is  sensitive to resistance ........ but  that does not make sense if it will travel through  everything with no losses.

Unless........ it has 2 forms....... transmitted  and  conducted ...... for lack of better names


```````````````````````````````````````````

I just ordered  these books

Lost Science (GBC) - Gerry Vassilatos

The Inventions,
Researches, and Writings of
Nikola Tesla

Both books were mentioned  in the  palsness video in Jeannas post.

~~~~~~~~~~~~~~~~~~~~~~~~~~

does anyone  know  what kind of caps the isolatioon caps at the bottoms of the rods are?

Are they door nob caps?
Any idea on the voltage rating?


gary

[resonanceman]

You should check it out it is an awesome read. Highly recommended. He later founf that he did not need the transmitter and the radiant energy was readily available using the receivers he developed in his last days and that was what he used to power the Peirce Arrow electric car.
This is what I am very interested in. As you can imagine it would be a highly suppressed idea.

Magluvin

I had never heard that Tesla had developed a  reciever that did not need a tranmitter ....... finding out how he did that would  be my ultimate goal..........but there is alot I have to learn  before I even think  about building something like that .......

gary

[sparks]

  Faraday tells us that the faster we change the magnetic field around a conductor the higher the induced voltage.
The more massive the conductor being effected by the magnetic field disruption than the more polarization of the charge or the more voltage appearing on the ends of that conductor.
In other words if you are going through the effort of changing the magnetic field about a conductor you might as well get your moneys worth and make sure your magnetic field shifting is effecting the most mass of the conductor as you can. If you make sure your magnetic disruption or field winding influences a large conductor and the only current that flows is outside the alternator conductors than your impedance is real low.  Alternators are not configured like this.  To increase the mass of copper under the influence of a changing magnetic field they put one end of a loop in one slot and then bend it over and put it in another slot going the other way.  Then bring it back to the first slot and over and over until we have a coil built up.  So what happens is when current flows in the load circuit internal currents flow in the alternator coil.  A bucking magnetic field is created and the engine has to work harder to cause the magnetic field changes due to the Lenz effect  (not law mind you effect).  Dumb just plain old dumb.

[nueview]

 
jeanna i keep trying to tell you how it works and to show all the effects but you want to complicate it

it works by EMF and MMF relation to each as a part of the matter make up a hairpin circuit is a capacitive generator in pure form to plates are mounted on a disc and two plates are stationary charge the plates dc with high voltage commutator the shaft plates out to a long flouresent tube and rotate the plates bubbles of light will appear in the tube no power is drawn just moved open the circuit and it will creat so much drag it will stall a motor other effects are able to be demonstrated as well what you want is standing current on moving voltage this is the last time i will write about this.

[resonanceman]

jeanna i keep trying to tell you how it works and to show all the effects but you want to complicate it

it works by EMF and MMF relation to each as a part of the matter make up a hairpin circuit is a capacitive generator in pure form to plates are mounted on a disc and two plates are stationary charge the plates dc with high voltage commutator the shaft plates out to a long flouresent tube and rotate the plates bubbles of light will appear in the tube no power is drawn just moved open the circuit and it will creat so much drag it will stall a motor other effects are able to be demonstrated as well what you want is standing current on moving voltage this is the last time i will write about this.

nueview

Would  you like to see technology like we deal  with on this site  grow>

Would you like to see this kind of  stuff go mainstream?

If  you do   I would  suggest  that you  be paitant with Jeanna.
She  thinks in details .........she  doesn't  understand   until the pieces fit together.

Why would it be  good for you to be patient?
When  Jeanna  gets it ...........she  really gets it .........and she will
Translate what you teach her into  words that everyone here can understand.
Her  ability to grasp the concept then explain it clearly  is  a big part  of the success of the JT thread.

gary