Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Solid State Orbo System

Started by Groundloop, January 06, 2010, 12:21:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 8 9 10 11 12 ... 148
User actions

Bruce_TPU

#45
January 07, 2010, 07:59:12 PM
Quote from: Groundloop on January 07, 2010, 06:32:34 PM
Bruce,

Of all the crappy ideas,..............Just kidding LOL

I tested your idea. I made just a little coil onto a Ferrite tube and put the
new coil as in your drawing. And.................It worked! :-)

The generator coil did give out the same voltage as before and
the new coil was an added bonus. So now we know, three coils
on a setup like this.

Thanks,
Alex.

YES!  Very good news indeed!

Next thought is to use your frequency generator to pulse the toroid alone by it's self until you see a "drop" in current.  This will be the resonant frequency of your toroid.  I'm sure you know this, but more for those reading...LOL  Set your switching of the toroid at that frequency and your power consumption should go down. 

PS. What is your power input now, into the toroids?

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Groundloop

#46
January 07, 2010, 08:04:42 PM
Bruce,

The power input right now is zero. I just smoked my transistor.
I'm waiting for some hexfets in the mail and should have them
tomorrow. I'm working on an idea for a new switch that will
give me the resonant frequency automatic. Attached.....

Alex.

gotoluc

#47
January 07, 2010, 08:18:12 PM
Great idea there Bruce ;)  thanks for your contribution.

I was also thinking ::) last night, what if we pulse one coil at a time which would allow one permanent magnet flux to enter the pickup coil at a time, would the device still work in this configuration? ... if so, wouldn't the toroid that is on not help to combine its flux to the flux of the magnet that is coming in from the open side and vise-versa when it switches to the other coil?

Luc

Bruce_TPU

#48
January 07, 2010, 08:22:05 PM
Quote from: Groundloop on January 07, 2010, 08:04:42 PM
Bruce,

The power input right now is zero. I just smoked my transistor.
I'm waiting for some hexfets in the mail and should have them
tomorrow. I'm working on an idea for a new switch that will
give me the resonant frequency automatic. Attached.....

Alex.

Hi Alex,

Very cool circuit and idea! 

You know, having now three generator output coil, all of the outputs will be able to be wired in parallel, allowing for a bump in amperage.   :D

While we await your Hexfets, we will continue to think.  LOL

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Groundloop

#49
January 07, 2010, 08:22:35 PM
Luc,

It will work. I have tested with just one magnet and I get power.
But it will give half the power. So switching one toroid and then
the other will give 1/2 + 1/2 = 1.

Alex.
Print
Go Up Pages 1 ... 8 9 10 11 12 ... 148
User actions