Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Bruce's Discovery, Tesla's Missing Link for his Unipolar Generator!

Started by Bruce_TPU, March 21, 2010, 07:22:45 PM

Previous topic - Next topic

0 Members and 16 Guests are viewing this topic.

Print
Go Down Pages 1 ... 14 15 16 17 18 ... 36
User actions

sparks

#75
April 16, 2010, 07:46:16 AM
  On the motor generator thing I remember seeing a guy doit but the generator was mounted on a disk.  The countertorque on the generator stator was transferred to the drive mechanism using pulleys.  The Earth transfers some of its angular momentum to the moons orbital momentum.  This slows the rotation of the Earth and increases the angular velocity of the moon.   This causes the moons orbit to become more eliptical.  Someday it might just keep on trucking and never come back.  I was dynamometer testing a small 1/6 hp fan motor one day. I didnt bother bolting it down just chucked it and grabbed onto the stator.  My guy was at the load control smiling.  I said give it to it.  He loaded her down.  (The load is created by spinning a large steel disc through electromagnets causing eddy currents by the way)  It took considerable energy on my part to hold onto the stator.  After about 15 seconds I had enough and my guy turned the switch off still smiling.  If the stator I was grabbing had a pulley on it driving a generator load I dont think I would have broken a sweat.
Think Legacy
A spark gap is cold cold cold
Space is a hot hot liquid
Spread the Love

mscoffman

#76
April 16, 2010, 12:01:26 PM
Quote from: Bruce_TPU on April 15, 2010, 09:27:08 PM

I have also come to the conclusion that I will have painted, all of my pieces.  I know someone who paint's cars and will take it to them for a proffessional job.  This will make it non-electrically conductive and avoid eddy currents of any kind.  I will have the shaft and all metal pieces painted. 


Taken out of context this text reads strangely... It should say:
"painting pieces will eliminate any eddy currents flowing between
the pieces". Painting won't paticularly reduce eddy currents flowing
inside unitary pieces of metal. In fact the homopolar generator disk
is one giant interrupted eddy current.

:S:MarkSCoffman

gravityblock

#77
April 16, 2010, 04:08:38 PM
Quote from: mscoffman on April 16, 2010, 12:01:26 PM
Taken out of context this text reads strangely... It should say:
"painting pieces will eliminate any eddy currents flowing between
the pieces". Painting won't paticularly reduce eddy currents flowing
inside unitary pieces of metal. In fact the homopolar generator disk is one giant interrupted eddy current.

:S:MarkSCoffman

I don't agree with this.  If the metal disc doesn't have a return path and is electrically isolated from the copper disc or coil which you will be drawing current from, then a static electric field is setup on the metal disc itself (the separated charges on the metal disc will have no where to go, due to no external circuit to complete a closed circuit).  Also, as long as the magnetic field is completely covering the conductive copper disc, then this eliminates most of the eddy currents.  Eddy currents are not a problem in the HPG.

GB
Insanity is doing the same thing over and over again, and expecting a different result.

God will confuse the wise with the simplest things of this world.  He will catch the wise in their own craftiness.

Bruce_TPU

#78
April 16, 2010, 04:39:03 PM
Quote from: mscoffman on April 16, 2010, 12:01:26 PM
Taken out of context this text reads strangely... It should say:
"painting pieces will eliminate any eddy currents flowing between
the pieces". Painting won't paticularly reduce eddy currents flowing
inside unitary pieces of metal. In fact the homopolar generator disk
is one giant interrupted eddy current.

:S:MarkSCoffman

Good thing I am not using a "generator disk" then isn't it?  LOL

Back track and read the parts that I wrote...correctly, please.   ;)

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Bruce_TPU

#79
April 17, 2010, 05:46:52 PM
Happy Saturday, ALL,

I feel as if I have made good progress today!  I did the painting myself and also designed and built the B.R.U.N.G. output stage, which is now prepared for the future brushes and mounted on it's shaft.  This part was critical and took a great deal of work but alas it has turned out just fine...

There is a nylon tube grommet glued inside, to keep the wires from contact with the shaft and to hold the output stage to the shaft.  The output stage IS removable from the shaft, if I need to change this shaft to a different length.

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 14 15 16 17 18 ... 36
User actions