Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Bruce's Discovery, Tesla's Missing Link for his Unipolar Generator!

Started by Bruce_TPU, March 21, 2010, 07:22:45 PM

Previous topic - Next topic

0 Members and 30 Guests are viewing this topic.

Print
Go Down Pages 1 ... 11 12 13 14 15 ... 36
User actions

Bruce_TPU

#60
April 08, 2010, 07:53:41 PM
Quote from: Airstriker on April 06, 2010, 05:12:29 AM
Hi Bruce,
Do they sell it to everyone? Or just SKDB related guys ? If you can get them from Steorn, what is the price ? Thanks in advance for that info.

Hi Airstriker,

I have heard back from Steorn and am saddened... How can a company be advertising something they are not yet selling?  Anywho, below was their reply...

Dear Bruce,

Many thanks for your interest in Steorn and ZeroF.

ZeroF is presently at a development stage and will be intergrated into commercial applications at a later stage this year. Hence I cannot provide you with the specifics you need at present, however I will keep your details on file and will contact you in due course - alternatively please visit the Steorn website for future updates.
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Airstriker

#61
April 09, 2010, 02:10:17 AM
Yes, that's sad. I've been searching for passive magnetic bearings for a while - the result is also sad. Every single one, I've found, is at a development stage, or nothing physical exists other than a patent. Actually, there are quite a lot of patents. Maybe anybody here was more successful ?

Anyway, what magnetic bearings is CLaNZeR using in his ORBO replications ?

gravityblock

#62
April 09, 2010, 06:12:23 AM
Quote from: Airstriker on April 09, 2010, 02:10:17 AM
Anyway, what magnetic bearings is CLaNZeR using in his ORBO replications ?

I think ClanZer's magnetic bearings are home-made.  Home made magnetic bearings made while in the Steorn Private developers group by Eltimple (check out Eltimple's youtube channel also), http://www.youtube.com/watch?v=__KxFo9ATD4

Halbach Arrays can be used for passive magnetic bearings.  One pole is external and is strengthened, while the other pole is internal and is nearly canceled.

This video demonstrates a simple Halbach Array, http://www.youtube.com/watch?v=Iq72vb6o3Tg

Here's a circular Halbach Array with a simple configuration, http://www.youtube.com/watch?v=qv-9IAj_YnI

Wiki has a good article of the different types of configurations for a Halbach Array, http://en.wikipedia.org/wiki/Halbach_Array#Halbach_cylinder

Passive Magnetic Bearing Development by NASA, http://www.grc.nasa.gov/WWW/spacemech/workshop02/mag-brg.html

ClanZer demonstrating a Halbach Array, http://www.youtube.com/watch?v=zzV6vMG31Mc

This looks promising also, http://www.youtube.com/watch?v=utrHUq4WRsY

GB
Insanity is doing the same thing over and over again, and expecting a different result.

God will confuse the wise with the simplest things of this world.  He will catch the wise in their own craftiness.

gravityblock

#63
April 10, 2010, 01:13:46 AM
Welcome back Bruce.

Short video of my HPG Test Rig, http://www.youtube.com/watch?v=f2WC6Mmk2pc

It's not finished yet.  I need one bearing to hold the end of the axle, and I need to find a good axle that will attach to my Dremel Drill (the axle in the video is for demonstration purposes only).  I have plans to add a center piece that is adjustable in order to shorten or extend the axle according to the different configurations I will be testing, such as multiple magnets/discs, etc.  I still need to work on making my large diameter magnets/Discs.  I could always make it a HPG/mini-lathe (I always wanted a lathe).

I will be testing the Pancake Coil configuration also.

GB
Insanity is doing the same thing over and over again, and expecting a different result.

God will confuse the wise with the simplest things of this world.  He will catch the wise in their own craftiness.

Bruce_TPU

#64
April 10, 2010, 05:31:44 PM
Hi GB,

Nice start you have there, with your build!  I look forward to your progress...

Thanks for the links on the magnetic bearing info.  I will probably just start off with ceramic bearings for my initial testing.  I need 1/2". 

I have purchased a 1/2" hollow steel rod for my shaft.  I also now have 2 pulley's with 1/2" bore holes, that will be welded to my new plates.  These will hold the shaft.  I found some lovely 10" tin circles that I will be using.  Not the 12" I wanted, but it is what was readily available.

I will now start to order a few magnets at a time.  This is where it get's expensive... I am going to go for broke and go with N52's, 1".  This should give me excellent penetration by the flux field of my bifilar pancake coils I will be building and stacking.

I have purchased 2 rolls of 20' of 12awg stranded. Low resistance, and is stranded...should give me the high amps I am wanting.

My initial thought is to go with 4 sandwiched between NORTH and SOUTH plates, but we will see.  If field is strong enough to penetrate, I may throw a couple of more in the mix.

Not sure how to drive it...will probably use a dremel or drill for testing...

Designing a motor (or way) to spin the thing is a whole other challange.

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 11 12 13 14 15 ... 36
User actions