Captret - Capacitor and Electret

[ibpointless2]

Also keep in mind that the captret is a purely voltage thing. Too much current and you destroy the Captret. This is why i would use several 9 volt batteries in series to give me a high voltage. See if you can put some high ohm resistors in the captret circuit so that you don't have too much current flowing inside the captret. Also to get the LED a full brightness you must discharge the captrets leads, use a LED or resistor to do that.

[casstete]

Also keep in mind that the captret is a purely voltage thing. Too much current and you destroy the Captret. This is why i would use several 9 volt batteries in series to give me a high voltage. See if you can put some high ohm resistors in the captret circuit so that you don't have too much current flowing inside the captret. Also to get the LED a full brightness you must discharge the captrets leads, use a LED or resistor to do that.

IBPointless2's device in combination with a Tesla coil ( reverse ) won a science fair for Students in Cyprus .

Electrical engineers ( PHD's frm University of Cyprus ) scratching their heads saying " this should not be possible " Locked away the Captret with multiple caps & Reverse Tesla coil + 12 V Motorbike Battery was running for over 2 Months !


I showed a friend the Captret & with some ideas he & I played with he incorporated a reverse tesla coil .

They use a 12 V Battery 10Amps and connect 20 something LED .

this is at a Cyprus University now and has been running for over 2 Months maintaining a charge of +- 10 Volt .

Here is the thing , it is acting like a Lenzless device or like ANY real free energy device , the more it uses the less it requires naturally all in relation to components .

Remove the reverse Tesla coil and it shuts down .

He will be posting videos and I will try to update more  here . It seems the device now doesn't deplete !

[MileHigh]

The story about electrical engineers scratching their heads and not understanding something is an old cliche.  I have read it many times with respect to the pulse motor scene.

If your data is well documented it should be explainable.  That's the challenge, it's to see past what at first appears to be extraordinary results and investigate further and arrive at an understanding.

MileHigh

[casstete]

The story about electrical engineers scratching their heads and not understanding something is an old cliche.  I have read it many times with respect to the pulse motor scene.

If your data is well documented it should be explainable.  That's the challenge, it's to see past what at first appears to be extraordinary results and investigate further and arrive at an understanding.

MileHigh

Yea we know that thanks for sharing , seen as 90% of Hero members here never understood the Pulse Motor and still don't I shall just say thanks for that .

This device uses less from source the more the Load requires . When you have that Super Hero ... you have overunity .

Not Rocket science thats what one observes in Bedini , Lenzless , Back EMF & you name it devices .

You still correct , but show me the captret with 12 V Battery running in locked University room for over 2 Months 25 + Led ( not much i know ) still charging after that period .

ALL others loose the potential after few days and don't charge again .

So since you know that a Bedini spins faster at full moon .... and that the more power the load takes the less is required from the source .

You should think for yourself . But you guys have a serious misunderstanding of how this energy flows and works and it has NOTHING to do with the electrical technology we surround us with that is designed for inverse technology to nature or life .

Bish bash bosh ... I feel you for saying what you did . I also believe it needs more investigation but it's done things I never expected when I showed him IBPoinless captret .

We did discuss atmopsheric antenna .. and his idea of adding tesla coil  .

By the way all the people with real devices say the same . Be it Bedini , Jean Louis Naudin who tested multiple Lenzless ,Back emf , pulse , Hydroxy HHO , fuel cells , is it Badcock the guy with the Lindemann , Bedini crew .

Basically every one who uses his brain & opens his eyes .

So like most Pro's here ( and some agent provocateur ) you don't appreciate that the output of these devices is determined by
1. the device
2. the correct balance of all components
3 very important ... the source . The potential within the source to absorb ( batteries ) .

A Full Battery in Bedini takes MORE energy from the source than an empty one
At full moon the Bedini spins faster ... more RPM registered

So I see all you guys checking the energy from behind the device .... as IF this would tell you the potential of the device .

WHAT A NEWBIE mistake ... Newbie to reality as shown experimentally to EVERYONE who cares

[Farmhand]

The cap-tret is not Over Unity, no one has shown any in - out measurements to support OU, you measure the power out of the battery
and the power consumed by the load to get efficiency, you don't set an LED to work powered by a battery and a oddly connected
capacitor and just see how long it runs then declare OU.

As well as that it is now known that the cap-tret effect destroys the capacitors, by using the can it puts stresses on the capacitor
it cannot take.

I can use my cricket bat to hit rocks over the fence and into the bush to get rid of them, much easier than throwing them and easier than carrying them all, but it will destroy my cricket bat because it is not intended to be used like that.

None of John Bedini's arrangements are OU either, no proof of any OU whatsoever.

...

Quote of Nikola Tesla which is pertinent here.

It is just like this: I have invented a knife.  The knife can cut with the sharp edge.  I tell the man who applies my invention, you must cut with the sharp edge.  I know perfectly well you can cut butter with the blunt edge, but my knife is not intended for this.

..

Here's a tip, if you cut bread with the blunt side of the knife the bread will last longer, but the loaf might get destroyed or flattened. No matter as long as it lasts longer. 

.