Overunity.com Archives

Solid States Devices => solid state devices => Topic started by: osiris on January 15, 2011, 03:48:44 PM

Title: TESLAS TPU
Post by: osiris on January 15, 2011, 03:48:44 PM
i have fully designed this in my mind  and can explain it to a T ...
i do however laque some of the skills required to build this ..

tesla has pattened this  but  not ever in a single unit  i have  picked out the required peices  to make such a unit from a number of my old pattends ..  ;)

i will share the concept public ..
i can cross all the t's and dot all the i's

but build it ...  this is another story ...


start with the tesla bifillar spiral pancake pattent
tesla states its  magnetic feild is 250 000 times as great as any other design ..

#1   this is the PRIMARY be it about a air core or magnetic ..
#2   TESLA states  the output wires must be 1/4 wave length of the  disruption of the driveing circuit ..
#3    this is a ring stack  that is tuned to resonance to acheive best results in econmy and efficiency
#4    this must be designed in stages ..
#5    primary pancake A is driven at resonance ... for reasons as above stated ...  primary B is tuned to resonance of primary A but is of high high self induction thuss causeing a kick upon colpase  and also working as a choke.. to reduce consumption of the device ..  they are both tuned to  A coil freq ..

so why piss with any other coil?

william
Title: Re: TESLAS TPU
Post by: nievesoliveras on January 15, 2011, 08:33:23 PM
We piss with another coil because you always start something supposedly great and after a few posts the project is abandoned or changed to another thing leaving us with the wasted money on parts.

Jesus
Title: Re: TESLAS TPU
Post by: osiris on January 15, 2011, 09:19:37 PM
Quote from: nievesoliveras on January 15, 2011, 08:33:23 PM
We piss with another coil because you always start something supposedly great and after a few posts the project is abandoned or changed to another thing leaving us with the wasted money on parts.

Jesus

im sorry this is for advanced coilist's

im not ready  to even build it yet ...

none of thease parts are wasted ...

to what do you refer to ?

if you find troubles in any of this jesus ,, im sad to say your not ready  :(

dont worrie  you wont be long

osiris
Title: Re: TESLAS TPU
Post by: pese on January 16, 2011, 08:11:06 AM
REF.:

#5    primary pancake A is driven at resonance


Response:

Pancake, even bifilar coins
dont´t have resonances

Pese


www.alt-nrg.de/pppp
link colections  GE / EN
Title: Re: TESLAS TPU
Post by: osiris on January 16, 2011, 01:21:40 PM
really?

this makes it darn easy then ..

;D ;D ;D

thank you sir pese!

william
Title: Re: TESLAS TPU
Post by: pese on January 16, 2011, 01:30:40 PM
Quote from: osiris on January 16, 2011, 01:21:40 PM
really?

this makes it darn easy then ..

;D ;D ;D

thank you sir pese!

william

cant do it easy.
is not resonating.

Als Tesla was not working with
Hertz. resonating waveforms.

Pqancake coils are to use on any
waveforms (but not resonating ).  possibly (`)
to longitual Waves.

G Pese
Title: Re: TESLAS TPU
Post by: osiris on January 16, 2011, 02:52:25 PM
Quote from: pese on January 16, 2011, 01:30:40 PM
cant do it easy.
is not resonating.

Als Tesla was not working with
Hertz. resonating waveforms.

Pqancake coils are to use on any
waveforms (but not resonating ).  possibly (`)
to longitual Waves.

G Pese

thats ok pese

we do not want perfect resonance as it will melt down on you .. hence why sm says he off tunes the device ..


all that is needed is the device running 1/4 wavelength of the secondary .. this totally changes the design operation of the device ..

simply wind the secondary  as a transformer ..  pick the wire length you want and match the fireing freq to 1/4 lenght of the secondary simply SWEEP THROUGH FREQS WITH BULB INTACT ..  when it lites bright your

done !

the other way was to pre tune primaries  then make a secondary based upon the primary resonance freq..

this eleminates all that !

see you tommorow .. with your working tpu!   8)

william