Hi you all,
Please view my most recent video about the Negative Lenz / Delayed Lenz Effect Experiment.
It is actually a Replication of the Thane C Heins Regenerative Accelerating Generator.
My results are the same as Thane C Heins. In my opinion this is what we all are looking for.
With Kind Regards,
Miracle (http://www.factoryappliancerepair.com)
https://www.youtube.com/watch?v=DHi_ynAzEJU&t=168s
My experiment is based in a rotor-magnet "SKYLEV" and a compressed starship coil; the starship coil is bifilar, in one of the coils i have connected a circuit with a hall effect sensor, and the other coil i have connected a 12 volts bulb, when i turn on the circuit the rotor start from zero to 40,000 RPM very fast, the regenerative acceleration under load, is the bulb of 12 volts, and the rotor accelerate without problem, the LENZ EFFECT was delayed.
Five years ago i compress a STARSHIP COIL with the objetive to make practical applications, reducing the shape of the coil, in this state OF COMPRESSION the STARSHIP COIL is a powerful coil, the new STARSHIP
COIL is a COMPRESSED SPIRAL STARSHIP COIL, this coil reduce in large porcentage the eddy currents, (in the video you can see the acceleration is amazing in the skylev) i will make more experiments soon...!
thanks for your time.
Quote from: skycollection 1 on August 05, 2017, 09:38:07 PM
https://www.youtube.com/watch?v=DHi_ynAzEJU&t=168s
My experiment is based in a rotor-magnet "SKYLEV" and a compressed starship coil; the starship coil is bifilar, in one of the coils i have connected a circuit with a hall effect sensor, and the other coil i have connected a 12 volts bulb, when i turn on the circuit the rotor start from zero to 40,000 RPM very fast, the regenerative acceleration under load, is the bulb of 12 volts, and the rotor accelerate without problem, the LENZ EFFECT was delayed.
Five years ago i compress a STARSHIP COIL with the objetive to make practical applications, reducing the shape of the coil, in this state OF COMPRESSION the STARSHIP COIL is a powerful coil, the new STARSHIP
COIL is a COMPRESSED SPIRAL STARSHIP COIL, this coil reduce in large percentage the eddy currents, (in the video you can see the acceleration is amazing in the skylev) i will make more experiments soon...!
thanks for your time.
Quote from: stphenmiracle on November 25, 2011, 08:29:49 PM
Hi you all,
Please view my most recent video about the Negative Lenz / Delayed Lenz Effect Experiment.
It is actually a Replication of the Thane C Heins Regenerative Accelerating Generator.
My results are the same as Thane C Heins. In my opinion this is what we all are looking for.
With Kind Regards,
Miracle (http://www.factoryappliancerepair.com)
Is this just BS? 1 post from you as a user, and a link to something useless? There is no video. Please be clear, and upload a video on youtube.
Vidar
I hope this serves for you...!
https://www.youtube.com/watch?v=sozTp3pedcI
Thanks for the youtube link.
The amp-meter measures 0.36A. What is the Voltage input?
Without this, we cannot know if there is zero lenz force or not.
Input energy is interesting. Amp alone does not tell a thing.
Vidar.
I am using a power supplay of 12 volts, it is obvious that the machine consumes certain amount of energy, the coils have a certain force that produces EDDY currents and that produce losses in their development and in this case there is not an opposite force that stops the rotor.
Hi skycollection, thanks for sharing.
If that is the stabilized amp draw, then it looks good to me.
I think the rotor speed helps.
Also, as far as the geometry, if a north pole magnet is approaching or sweeping toward the generator coil, then the other side of the coil is emitting a south pole, which is repelling the south magnet on rotor that is departing and might even be reaching around the coil and pulling in the approaching north pole rotor magnet.
If these things are happening, this may explain why the generator coil is not causing an opposing force.
This is much different than a normal coil, with a magnet passing the front of a solenoid.
Also, with your setup, the coil thickness may be a key to the non opposing generator coil effect, if the coil is too thick, it may not push the departing magnet much or reach around and pull in the approaching magnet.
peace love light
Yes is correct, the output coil is thin and apparently Eddy currents are not captured by the coil which is useful in this process...! for me this matter is new, i have in process a new configuration "bifilar" PANCAKE COIL, thin coil to drive the engine, i really don´t know which will be the result but now I have to go ahead and do more tests with new coils.
Quote from: skycollection 1 on September 07, 2017, 04:13:37 PM
I am using a power supplay of 12 volts, it is obvious that the machine consumes certain amount of energy, the coils have a certain force that produces EDDY currents and that produce losses in their development and in this case there is not an opposite force that stops the rotor.
OK. The energy input is hard to measure accurately due to the coil. 0.36A @ 12V is 4.23W in a resistive load, but there is a phase delay between current and voltage through a coil.
If you replace the LED bulb in the hand held coil with a short circuit, you will load it resistively and at maximum. This way is a good approach to confirm the lenz effect.
You have a terribly low efficency in you setup, and that will also have a terribly low lenz feedback to the amp. meter. In addition you use a LED bulb that probably require very little energy.
In addition to that, it looks like you have wrapped a copper foil around the spinning magnet. This foil accounts for most of the lenz-effect already, and any additional lenz effect caused by a low energy LED bulb will be relatively very very small.
Vidar
Some years ago I made statements that it is possible to eliminate the effect of lenz with pancake coils, now I can affirm that I have already achieved it with the GHOST COIL and a simple capacitor 1uF which is applicable only for this coil, GHOST COIL.
https://www.youtube.com/watch?v=4dvnj6Wet9Q
THE "MIRACLE" POLYESTER CAP 1uF, THERE IS NO EFFECT OF LENZ
from mexico with love
Quote from: skycollection 1 on May 03, 2018, 07:25:50 PM
Some years ago I made statements that it is possible to eliminate the effect of lenz with pancake coils, now I can affirm that I have already achieved it with the GHOST COIL and a simple capacitor 1uF which is applicable only for this coil, GHOST COIL.
https://www.youtube.com/watch?v=4dvnj6Wet9Q (https://www.youtube.com/watch?v=4dvnj6Wet9Q)
THE "MIRACLE" POLYESTER CAP 1uF, THERE IS NO EFFECT OF LENZ
from mexico with love
Very nice!
Do you have a video that explains your rotor? Is it pure copper?
No, inside of the copper tube i have two big neodymium bars, North-South.
Tnx! Keep up the good work !!