Hai evryone ;D
Excuse me..
I will show u my generator.
There are the new generator electrc, its high couging when start but easy when running.
that is no effect from back emf, my generator has cpasity 220v 20a only 100rpm rotation rotor, very easy when i rotate the rotor use may hand and no effect when load and no load.
see my video :
http://www.youtube.com/watch?v=bz8k34CWRgk (http://www.youtube.com/watch?v=bz8k34CWRgk)
Design made by my frends but now I cnnt calling him, I have this design, if u want download it pls send mssge to email ' syairalamsyahrazab@yahoo.co.id '
thanks.
:D :D :D :D :D :D :D :D
LMAO
Guys-you have to watch the video for a good laugh ;D
Good to see he is wearing his indian safty boots.
Quote from: tinman on November 07, 2014, 05:00:49 AM
:D :D :D :D :D :D :D :D
LMAO
Guys-you have to watch the video for a good laugh ;D
Good to see he is wearing his indian safty boots.
hehe..lol..I sell my safty boots for buy magnet, sory that is fvorite boot in indnesia,
I am just a simple man ;)
Let 's forget about the shoes back to my generator.
Quote from: syairchairun on November 07, 2014, 06:52:20 AM
hehe..lol..I sell my safty boots for buy magnet, sory that is fvorite boot in indnesia,
I am just a simple man ;)
Let 's forget about the shoes back to my generator.
Like all the generator setups over that way(and the rest of the world),it is a hoax. Watching the video,you can clearly see and hear that your friend that hit the power switch to run the drop saw,didnt quite get his off timeing right. the saw kept running for a while after you stopped turning your generator. :P
Sorry mate,but scams have to be spot on these days to warrent a closer look. Your effort is-well,like i said :D :D :D
But it was good for a laugh.
Quote from: tinman on November 07, 2014, 07:01:24 AM
Like all the generator setups over that way(and the rest of the world),it is a hoax. Watching the video,you can clearly see and hear that your friend that hit the power switch to run the drop saw,didnt quite get his off timeing right. the saw kept running for a while after you stopped turning your generator. :P
Sorry mate,but scams have to be spot on these days to warrent a closer look. Your effort is-well,like i said :D :D :D
But it was good for a laugh.
Lol u dont know, my generator work in only 100rpm , i only rotate the rotor use my hand, if u say " he saw kept running for a while after you stopped turning your generator'', i only :D to u, My camera is not good and the saw must kept rotation when i stop rotate the rotor because its rotate in 13.000rpm, and if u say ''Watching the video,you can clearly see and hear that your friend that hit the power switch to run the drop saw,didnt quite get his off timeing right'' i only ;D to u again, because i am alone, see shadow from sundial there no one, i am alone and bring the camera.
Stop replying to this tosser guys he's just after attention.
Well done,
please show it running a few hundred Watts light bulbs and please post the schematic.
Many thanks in advance.
Regards, Stefan.
Quote from: hartiberlin on November 07, 2014, 08:52:32 AM
Well done,
please show it running a few hundred Watts light bulbs and please post the schematic.
Many thanks in advance.
Regards, Stefan.
Ok Stefan, wait I am doing it, for more detail...I thnk less than 24 hours..
syairchairun,
You could use some wire and connect that drill motor to the generator to drive it and have it self powered?
Quote from: syairchairun on November 06, 2014, 10:21:16 AM
Hai evryone ;D
Excuse me..
I will show u my generator.
There are the new generator electrc, its high couging when start but easy when running.
that is no effect from back emf, my generator has cpasity 220v 20a only 100rpm rotation rotor, very easy when i rotate the rotor use may hand and no effect when load and no load.
see my video :
http://www.youtube.com/watch?v=bz8k34CWRgk (http://www.youtube.com/watch?v=bz8k34CWRgk)
Design made by my frends but now I cnnt calling him, I have this design, if u want download it pls send mssge to email ' syairalamsyahrazab@yahoo.co.id '
thanks.
Well done
Thanks for sharing
Please dont be discouraged by rude remarks from some folks around here, there are some who dont want you to share your discovery.
Looking forward to the schematic.
dave
Who are these people who "don't want you to share" any discovery? Certainly you can't be referring to me. I want _full sharing_ from all claimants, since this is an Open Source web forum. Let's see full schematics, proper testing with scopes and meters and a real load bank, site visits from local scientists and academics, etc etc.
Quote from: TinselKoala on November 08, 2014, 09:39:01 AM
Who are these people who "don't want you to share" any discovery? Certainly you can't be referring to me. I want _full sharing_ from all claimants, since this is an Open Source web forum. Let's see full schematics, proper testing with scopes and meters and a real load bank, site visits from local scientists and academics, etc etc.
Lol
You must have a guilty conscience, or you were going to diss this guy then read my post.
lol
Someone comes on this forum to show something and is attacked and made fun of right off the bat :-[
If I was him I would never come back
but it seems thats what a few folks around here want.
@Free
What drawings are you referring too.
Never mind I didnt realize I never finished watching the vid, got distracted.
By the looks of it, keeping the big white pulley spinning with 1 finger, that any one of the motors it seems to power, could turn that big white pulley and self run.
There were a couple events in the vid that seem to show less power to the load(power tools) when spinning the pulley slower, rather than a 'switch' to outside power when turning the pulley. Maybe someone could do an analysis of the vid to see if thats the case. Been done many times. Mylow vids, etc.
Has anyone sent a request for info? link in vid description.
Probably the worst piece of evidence that it may be fake is the delay of putting out the info immediately, only because that is the usual case history shows.
It really bites when someone says they will show, then they dont. Or then they suddenly disappear, feeding conspiracy thoughts that may not be the case at all.
Over the years I have come to believe that the only way to get info out on a working device is to spread the word(build info) very quickly and thoroughly. I fully believe that big oil would do just about anything to stop such a device from getting out. Just as they prevented much of the early studies on the gulf oil spill. Google that, and all the other stuff is not so improbable. ;)
In a way, I cannot blame them too much. Most anyone that had that much invested into their business would want to protect it from any competition. But going to far is not cool in the least.
So I guess we will see how this turns out. I always have hope. But have been disappointed too many times not to be somewhat skeptical to the well known patterns of how OU claims turn out so far. So pay close attention, but dont fall all the way in until they show you what it is you are really stepping into. ;)
Mags
Quote from: Dave45 on November 08, 2014, 12:51:00 PM
Lol
You must have a guilty conscience, or you were going to diss this guy then read my post.
lol
Someone comes on this forum to show something and is attacked and made fun of right off the bat :-[
If I was him I would never come back
but it seems thats what a few folks around here want.
Cool-so go ahead and send him an email for more info on the generator-so as he has your email address. And once you open his reply email,he will then have access to your computor.
You should just throw out all common sense,and forget the fact that the startup current from the large drop saw alone is around 1.2-1.5kW-and could be achieved by a single human hand turning a pully.And im sure some guy walking around in thong's doing his own camera work in what looks like some scrap yard has mannaged to do what thousands of well equiped,well funded companies have faild to do for the last 100 years.Looks like he is well equiped to build the device in the drawing ::)
Your right Dave-it's time to become more gullible. It's time to throw out everything that we have learned through experience and past scam's,and just welcome these guys with open arm's. It's time we just accept that what we see on youtube is fact,and that the unbelievable can be achieved by anyone that walks around in chinese safty boots,and wants you to email them for more info-even though that info could be just placed right here on this very thread.It's time for this forum to allow and accept every OU machine out there,and to post them all !right here! as working devices-no questions asked. We dont need clear drawings,we dont need any working replication's,and we sure as hell dont need any verification at all-they all work as seen on youtube. :D
Infact Dave,this opens the door to massive savings in court cost. No longer will there be a need for any trial's. All that has to happen now is for the suspect to just tell the judge he is innocent,and he is set free--it's all done within minute's ;)-no more lengthy trial's.
@ TK,MileHigh
Guys like you and me are no longer required-->Dave has it all sorted,and we should all be running our homes of youtube free energy devices any time soon 8). I have waited for this day to come for many years--> total freedom is only an email away.
His Email won't go thru
8)
' syairalamsyahrazab@yahoo.co.id '
can we have one that works please ? [or did I copy it wrong??]
Thx
Chet
Lol I got it boys go on home lol
Quote from: ramset on November 08, 2014, 09:16:10 PM
His Email won't go thru
8)
' syairalamsyahrazab@yahoo.co.id '
can we have one that works please ? [or did I copy it wrong??]
Thx
Chet
Hi Chet,
You wrote in an extra
h in the prefix of the address I put it in bold above to show what to omit. So this is his e-mail as shown in the end of the video: syairalamsyarazab@yahoo.co.id
Gyula
@ syairchairun, How can we BUY the Generator Plans?
Thank you.
.
OR,
Teach the working principle, and you can go from there.
Gyula
thank you, that Email went thru .
will keep you posted.
***UPDATE
Delivery to that address failed permanently
no good
used this one > syairalamsyarazab@yahoo.co.id <
and this one > syairalamsyahrazab@yahoo.co.id <
Both NG
Chet
maybe ask him directly in his new thread.
http://www.overunity.com/15083/the-new-generator-no-effect-counter-b-emf-part-2-selfrunning/msg422911/#msg422911
.