Here are some good ideas for thoses interrested in mechanical resonance, due to censorship by the forums hacks, Tinman and Magluvin, who do not have enough common ense to realise that their concept is non-viable.
Overunity forums should not tolerate sycophants like Magluvin and Tinman, who have censored and argued against voices of reason.
https://funds.gofundme.com/dashboard/gewezcvw
In the picture you can clearly see the idiot response vs reality. I declare this day slap an idiot day.
"I declare this day slap an idiot day." I wonder if you look in the mirror and slap yourself often. You need it.
Quote from: ARMCORTEX on April 20, 2016, 02:59:16 PM
Here are some good ideas for thoses interrested in mechanical resonance, due to censorship by the forums hacks, Tinman and Magluvin, who do not have enough common ense to realise that their concept is non-viable.
Overunity forums should not tolerate sycophants like Magluvin and Tinman, who have censored and argued against voices of reason.
https://funds.gofundme.com/dashboard/gewezcvw (https://funds.gofundme.com/dashboard/gewezcvw)
In the picture you can clearly see the idiot response vs reality. I declare this day slap an idiot day.
Since my name was mentioned....
"Here are some good ideas for thoses interrested in mechanical resonance, due to censorship by the forums hacks, Tinman and Magluvin, who do not have enough common ense to realise that their concept is non-viable."
Hmm. I see no ideas at all. In fact, if i click on your name, then click on Show Posts, I see nothing that you have made. I do see a lot of obsenties and insults toward others. ;)
"Overunity forums should not tolerate sycophants like Magluvin and Tinman, who have censored and argued against voices of reason."
Censored voices of reason? You came to my thread and claimed that an offset flywheel has resonance. Great. Show it then. Prove it. But no. You only post obscenities and insults. Good show old chap. Good show. ::) So yeah. We have a moderated thread so we can clean up garbage others wish to throw on it. ;) You were warned and still provided nothing of value except for more obscenities and insults, just as you have done here at the start of this thread.
No wonder your gofundme scheme does not entice people to invest in YOU. ;) ::)
"In the picture you can clearly see the idiot response vs reality. I declare this day slap an idiot day."
Tinman and I have already shown better results as we continue on. What have you shown? ;)
So we have a little look at your gofundme project. Hmm, that link doesnt work. If I eliminate the word 'funds' before 'gofundme' in the link, it says
Campaign Not Found
Neither Tinman nor I have asked for any money for projects. We are not rich. We do it on low budgets like most others here. We owe 'you' nothing. Not even our time.
Mags
https://www.youtube.com/user/Skyrimninjamod/videos?shelf_id=0&view=0&sort=dd
Here is my YT, the experiments that could be tried. Your simple brain may not be able to connect how these algodoo sims could connect mechanically into a real life device that turns an actual generator, but they would all be much more interresting and valid overunity experiments.
How can you even compare your stupid build to my mechanical resonance concepts is beyond me.
Now please remain silent, I am diligent builder, who has designed, built, from scratch, electrical and mechanical innovations, you have only copied and made easy things with no purpose.
Your cretinous attitude towards overunity needs to end now. You should go teach elementary physics in highschool with your little pendulum, but dont forget other subjects because thats only for for about 3-4 hours of class.
Quote from: ARMCORTEX on April 21, 2016, 05:16:36 AM
https://www.youtube.com/user/Skyrimninjamod/videos?shelf_id=0&view=0&sort=dd
Here is my YT, the experiments that could be tried. Your simple brain may not be able to connect how these algodoo sims could connect mechanically into a real life device that turns an actual generator, but they would all be much more interresting and valid overunity experiments.
Your cretinous attitude towards overunity needs to end now. You should go teach elementary physics in highschool with your little pendulum, but dont forget other subjects because thats only for for about 3-4 hours of class.
QuoteHow can you even compare your stupid build to my mechanical resonance concepts is beyond me.
Easy.
You deal in make believe ,and we deal in reality.
QuoteNow please remain silent, I am diligent builder, who has designed, built, from scratch, electrical and mechanical innovations, you have only copied and made easy things with no purpose.
You have built nothing--you have nothing--nor do you know anything.
You are a fake--we all know that ;).
Enjoy your thread for another 24 hour's,and then kiss it goodbye :D
Brad
Tinman, clearly you are the fake.
I build parts for military and civilian use on daily basis, this you will never see.
I can simulate, design, machine, on many software.
I operate many difficult and scary machines.
I am capable in traditionnal and embedded electronics.
Bulding is something I do for a living.
I dont waste my ammunition on stupid things that waste time and money, you are correct.
I declare this day slap an idiot day, again, 2 idiots, 2 slap an idiot day in a row.
Quote from: ARMCORTEX on April 21, 2016, 06:21:37 AM
Tinman, clearly you are the fake.
QuoteI build parts for military and civilian use on daily basis, this you will never see.
And we all know why that is ;)
QuoteI can simulate, design, machine, on many software.
Wow- I normally just picture it in my head,and then build it.
QuoteI operate many difficult and scary machines.
What is a difficult and scary machine? ::)
QuoteI am capable in traditionnal and embedded electronics.
I can type as well--even make spelling mistakes like you ;)--> 1 n in traditional there TEX ;)
QuoteBulding is something I do for a living.
Im guessing you mean !building! ?--and your point would be?
QuoteI dont waste my ammunition on stupid things that waste time and money, you are correct.
I am :o
Lucky me :D
So lets see these !non! stupid things you have not wasted time and money on ;D
Oh thats right--you have nothing to show ::)
QuoteI declare this day slap an idiot day.
How's ya face feeling?.
Brad
You can see the desperation when somebody points out typos, I will not correct typos for the likes of you.
Let it be known, in my mind, I have the 2 single best mechanical designs for overunity the world has ever seen.
When I build these, and they dont suceed, it will be clearly a matter of fact that Overunity cannot be achieved with mechanical methods.
These ideas, are so awesome, so clever, so sophisticated yet simple, that I cannot show them yet.
I first thought of these, in my mind, then, I design. The energy and speed is such that cheaply made wooden imprecise build wont work.
This thread will be on top of yours, until yours dissapears, you are not the true ambassador of mechanical resonance applied to overunity devices.
Your sycophant attitude and censoring has lead to this, you left me no choice.
"Let it be known, in my mind, I have the 2 single best mechanical designs for overunity the world has ever seen." Yes in your mind. only; not in reality.
OU does not exist.
author=ARMCORTEX link=topic=16550.msg481538#msg481538 date=1461236424]
QuoteYou can see the desperation when somebody points out typos, I will not correct typos for the likes of you.
Hey--im all with ya on that one Texy.
QuoteLet it be known, in my mind, I have the 2 single best mechanical designs for overunity the world has ever seen.
And in my mind--we will never see it eventuate ;)
QuoteWhen I build these, and they dont suceed, it will be clearly a matter of fact that Overunity cannot be achieved with mechanical methods.
More a case of--you have failed to live up to your own reputation ;)
QuoteThese ideas, are so awesome, so clever, so sophisticated yet simple, that I cannot show them yet.
Nor will ever show them ;D
QuoteI first thought of these, in my mind, then, I design. The energy and speed is such that cheaply made wooden imprecise build wont work.
Of course not.
You will require parts that are no longer available ;)
QuoteThis thread will be on top of yours, until yours dissapears, you are not the true ambassador of mechanical resonance applied to overunity devices.
Never claimed to be.
But what i am is some one that actually builds things--unlike your self,who has not,nor will not build anything. :D
This thread will die very soon,and ours(Mag;s and mine) will continue to grow.
QuoteYour sycophant attitude and censoring has lead to this, you left me no choice.
I have the ability to reduce your choices :o-->wow,that's pretty good :) Power to me then ;)
It's quite funny when you think of what might happen here.
You made this thread to try and silence myself and Mag's,just because i removed a post of yours that was an insult toward Mag's. Now where it !might! get funny is--me and Mag's may be the only ones posting on your thread very soon :D--wouldnt that be a hoot.
Brad
Hey Brad,
Have you noticed that those that shout the loudest about how great they are NEVER have anything to show except false claims and derogatory comments towards others. I am really enjoying the thread you and Mags have started. You are showing some real research and original thinking. Tesla clearly proved mechanical resonance has some great potential. Keep up the good work and don't let clowns distract you from your efforts.
Carroll
PS: I wonder why some people don't know how to use a spell checker. Maybe they aren't as smart as they claim to be.
Quote from: citfta on April 21, 2016, 08:04:35 AM
Hey Brad,
Have you noticed that those that shout the loudest about how great they are NEVER have anything to show except false claims and derogatory comments towards others. I am really enjoying the thread you and Mags have started. You are showing some real research and original thinking. Tesla clearly proved mechanical resonance has some great potential. Keep up the good work and don't let clowns distract you from your efforts.
Carroll
PS: I wonder why some people don't know how to use a spell checker. Maybe they aren't as smart as they claim to be.
Thanks Carroll.
I cant say much in regards to spelling,as i am no great speller my self lol.
Texy wont show anything,and so this thread will become very dull,so maybe myself and mags can start sharing our stuff here as well,brighten the thread up a bit--on Texy's thread ;D.
So here is the latest video that was posted on the !actual! mechanical resonance thread.
He really get's some amplitude with this setup.\
https://www.youtube.com/watch?v=PGLkwymPqEE
Brad
A bit of a power upgrade,done by tuning the length of the exhaust pipe.
My son was most happy with the result's.
https://www.youtube.com/watch?v=-J1rRKXiSeI
Brad
Oh-here was a fun experiment using tesla bifilar pancake coils.
Check out the wave form from the two ends of the coil :D
https://www.youtube.com/watch?v=AmR_Sqw7wv0
Brad
Hey Texy
Did you see the early days of the RT ;)
https://www.youtube.com/watch?v=szpJ97M58G4
Brad
Quote from: ARMCORTEX on April 21, 2016, 05:16:36 AM
https://www.youtube.com/user/Skyrimninjamod/videos?shelf_id=0&view=0&sort=dd (https://www.youtube.com/user/Skyrimninjamod/videos?shelf_id=0&view=0&sort=dd)
Here is my YT, the experiments that could be tried. Your simple brain may not be able to connect how these algodoo sims could connect mechanically into a real life device that turns an actual generator, but they would all be much more interresting and valid overunity experiments.
How can you even compare your stupid build to my mechanical resonance concepts is beyond me.
Now please remain silent, I am diligent builder, who has designed, built, from scratch, electrical and mechanical innovations, you have only copied and made easy things with no purpose.
Your cretinous attitude towards overunity needs to end now. You should go teach elementary physics in highschool with your little pendulum, but dont forget other subjects because thats only for for about 3-4 hours of class.
"Now please remain silent"
Nobody really wants to argue. It is unproductive. So I ask the same of you. ;)
So just do your work and lets see what comes of it, just as we are trying to do. Ok? ;)
Maybe we are all on the right track here.
One thing that confuses me. You say we are OU fools. Even on the gofundme page you come down on the OU community, yet you are asking for 30,000 to do your project. Are you asking for the money so you can prove ou does not exist? Here is the proper link to your fund page https://gofundme.com/gewezcvw (https://funds.gofundme.com/dashboard/gewezcvw)
Are you doing it to waste the fund investors money? Just wondering what the goal is.
Mags
Quote from: tinman on April 21, 2016, 09:06:28 AM
Thanks Carroll.
I cant say much in regards to spelling,as i am no great speller my self lol.
Texy wont show anything,and so this thread will become very dull,so maybe myself and mags can start sharing our stuff here as well,brighten the thread up a bit--on Texy's thread ;D .
So here is the latest video that was posted on the !actual! mechanical resonance thread.
He really get's some amplitude with this setup.\
https://www.youtube.com/watch?v=PGLkwymPqEE (https://www.youtube.com/watch?v=PGLkwymPqEE)
Brad
That vid is very impressive. Looks to be under 1w in and lots of action. Glad he posted that. ;) ;D
Mags
Quote from: ARMCORTEX on April 21, 2016, 07:00:24 AM
Let it be known, in my mind, I have the 2 single best mechanical designs for overunity the world has ever seen.
Let it be known; Based upon the fact you were screen capturing drawings from my files shared when I mistakenly trusted you - you might. However based upon the fact the one you put up for a 30K gofundme ripoff for a "contraption" that shouldn't cost $5000 for materials, parts, and labor is a direct variant of one I clearly remember showing you - your design skills have a long way to go in developing anything that will work and stay together in the case of what I call ShAkErS and THUMPer's that tear themselves apart from the first moment motion begins.
Quote from: ARMCORTEX on April 21, 2016, 07:00:24 AM
When I build these, and they dont suceed, it will be clearly a matter of fact that Overunity cannot be achieved with mechanical methods.
It "will be clearly a matter of fact that" you don't possess the know how, among other things.
Quote from: ARMCORTEX on April 21, 2016, 07:00:24 AM
These ideas, are so awesome, so clever, so sophisticated yet simple, that I cannot show them yet.
I first thought of these, in my mind, then, I design. The energy and speed is such that cheaply made wooden imprecise build wont work.
My best guess is that whatever you may have "in mind" is not your own original thought and was the work of someone else.
BTW: Memoryman and I rarely agree on anything but you are proving to be the exception, I do agree with him about you.
"Memoryman and I rarely agree on anything" your loss, Mike.
Temporal Visitor
It is good that you let folks Know who is around here and just how low they will stoop to
Make a buck .
Hope all is well.
respectfully
Chet K
Quote from: ramset on April 21, 2016, 02:43:10 PM
Temporal Visitor
It is good that you let folks Know who is around here and just how low they will stoop to
Make a buck .
Hope all is well.
respectfully
Chet K
Hi Chet,
Thanks for doing what I expected would be a thankless job, of trying to help others.
Made my day a bit brighter, Thanks to you.
Michael
Everybody remain silent, my mechanical resonance are the most legitimate designs to try.
When and if those fail, mechanical overunity will be officially impossible.
And thats a fact.
Then I may move on to some type of Clem Engine, or that russian magnet motor.
Temporal, I am sorry but that your designs were lost when I changed my computer, never cared about them.
Quote from: ARMCORTEX on April 21, 2016, 06:32:36 PM
Everybody remain silent, my mechanical resonance are the most legitimate designs to try.
When and if those fail, mechanical overunity will be officially impossible.
And thats a fact.
Then I may move on to some type of Clem Engine, or that russian magnet motor.
QuoteTemporal, I am sorry but that your designs were lost when I changed my computer, never cared about them.
Lol.
Lets look at post 5 again
QuoteTinman, clearly you are the fake.
I build parts for military and civilian use on daily basis, this you will never see.
I can simulate, design, machine, on many software.
I operate many difficult and scary machines.
I am capable in traditionnal and embedded electronics.
Bulding is something I do for a living.
I dont waste my ammunition on stupid things that waste time and money, you are correct.
I declare this day slap an idiot day, again, 2 idiots, 2 slap an idiot day in a row.
Wow,so gifted in the art of electronics,and yet a simple file transfer was beyond your ability lol.
Who is the !fake! one now.
Brad
Whatever man, as long as you realise, that my designs beats your designs anyday, all day.
When you do everything you possibly can to imitate and evolve my designs, then you will be doing smart things.
You should also try Dimitriev gravity wheel.
Come talk again when you want to be smart and you want overunity.
Now you are just mad, and nutty.
Quote from: ARMCORTEX on April 21, 2016, 06:32:36 PM
Temporal, I am sorry but that your designs were lost when I changed my computer, never cared about them.
You couldn't have stated it better to show your real character: one who does not know how to tell the truth.
TINMAN picked up on it and highlighted it in red. (nice touch)
Now about truth: You admit you did take from designs I showed you but "never cared about them". You just trapped yourself very nicely in your lies. It is so obvious you are lying not only to us; but to yourself as well. That is pitiful.
Know that since you write you are "sorry" I accept you are pitiful and forgive you but will never forget what you are "in reality".
Quote from: ARMCORTEX on April 21, 2016, 06:32:36 PM
Everybody remain silent, my mechanical resonance are the most legitimate designs to try.
When and if those fail, mechanical overunity will be officially impossible.
And thats a fact.
Then I may move on to some type of Clem Engine, or that russian magnet motor.
Obviously you don't have any original thought to WORK from, nor a clue on HOW TO GEN-E-RATE ENERGY: "in reality".
"All things must pass." Isn't it a pity?
http://www.metrolyrics.com/isnt-it-a-pity-lyrics-george-harrison.html
Ya know, it shouldnt take $30,000 to build the flywheel device. It seems Tex says he has all these skills and has built and designed things he cant even show. Well then he should have enough of his own money to put into his project of debunking OU claims. ??? ;) But no. He asks for $30,000 from investors of gofundme to dump money into his idea of showing there is no idea. ??? ::) ;)
Sounds like a money scam to me. :o ;)
And by the looks of the gofundme total so far, $5, his sales pitch is about as good as his talk here. ;)
Mags
I spent about 15 minutes on that gofundme thing, I am not relying on that and dont want to owe anybody.
The goal was to make a nice presentation for Topsolid, and I got a good price cut.
I sure will spend a few bucks on my ideas, its not about a sale pitch, you get nothing in return and I am not selling nothing.
Not at all a scam. I am not ready to fully explain the real idea, the real arrangement.
Bump
Just keeping your thread on top Tex ;)
Brad
well that's 10 mins I wont get back.
Armcortex can you just post a link to your YT channel so I can understand what you are talking about.
Quote from: Jimboot on April 24, 2016, 02:40:17 AM
well that's 10 mins I wont get back.
Armcortex can you just post a link to your YT channel so I can understand what you are talking about.
Tex dosnt even know what he's talking about Jim,so will be hard for you to work it out.
Not much on his youtube channel to see ;)
Plenty of talk though lol.
Brad
What are you talking about?..SLAP SLAP Nothing is sure untill you have an over-energy design working.
One thing is for sure, your pendulum design wont be making useable rotary genrators to make energy needed for plants growing/heat.
I am starting to be tired by your useless antics, I now see why I dont respect most people on these forums. They say the most useless things.
They are the first critics, but the last to work and provide useful input.
To Jimboot, I have put the YT, can you see?
To the hypocrit named Temporal, I fail to see your reasoning, first you say you are here to help, then you say I stole your designs? Either you are here
to help or you are here trying to defraud people. Any design I had of yous ( wich was useless to me and thus forgotten) should have been clearly put out on the net
into proper format long time ago, you dont seem to respect people's time, put up or shut up.
Quote from: ARMCORTEX on April 24, 2016, 10:01:56 AM
What are you talking about?..SLAP SLAP Nothing is sure untill you have an over-energy design working.
One thing is for sure, your pendulum design wont be making useable rotary genrators to make energy needed for plants growing/heat.
I am starting to be tired by your useless antics, I now see why I dont respect most people on these forums. They say the most useless things.
They are the first critics, but the last to work and provide useful input.
To Jimboot, I have put the YT, can you see?
To the hypocrit named Temporal, I fail to see your reasoning, first you say you are here to help, then you say I stole your designs? Either you are here
to help or you are here trying to defraud people. Any design I had of yous ( wich was useless to me and thus forgotten) should have been clearly put out on the net
into proper format long time ago, you dont seem to respect people's time, put up or shut up.
You "fail to see"; for the plank in your own eye. (and lots more) You are a critic and do not appear to have "provided anything useful". You admit you; "dont respect most people on these forums." You have already admitted you did take from my designs and now go on to write "stole" along with "Any design I had yous" [sic] ( wich was useless to me and thus forgotten) should have been clearly put out on the net into
proper format long time ago,"
Therefore I reason: You are like someone invited over to dine with, who "helps" themselves to all they can stuff in their mouth and their pockets, not at all respectful of the time spent with you or time spent doing the WORK that was done to pay for providing you with what you did not provide for yourself.
Fortunately you are/were dense enough to email asking for a higher res image than what you DID APPEAR TO FIND USEFUL in what you did TAKE without asking permission, when you did, in just the first few "visits". Smooth move!
Better still is the lesson learned in inviting a mental patient that is beyond any help I might try to give.
Now try hard to grasp this: I already forgave you and yet you rattle on.
Your own words hang you, in more ways than one. Keep up the good work. You are excused.
This is mechanical resonance not yet free energy so I dont see why your all up and about over it ! Tin-man made a very good example for the use of a system with a transformer. And yes I can see many a use for it !
If you want free energy go find another universe because to gain an energy flow you need to at least by the parts and build it so that is not going to be free is it !
stick to what resonance is and why does it do what it does ! As yet there is no formula in quantum mechanics for it all we know is that it does have a relationship to the laws of sound ! My question is can it do the same thing with light and magnetic resonance ? Than what about biological resonance and so on !
There so many free energy electrical system out there now so go build one but resonance is it self something very special ..
Haha Temporal, you are innocent kid, you willingly show me screen via Chat video, of supposedly 3kw self generator, anything you show, is fair game at this point.
You always seem to go back to this, I will say it once and for all, your designs are/were useless, I never shared nor analysed your design, in autocad, cheap old autocad, or was it freecad? Haha...
I designed mine in Topsolid 7. State of the art software for OU design and industrial production toolchain. I clearly surpass all of you due to my superior skills in Topsolid 7.
Whatever you can do, I can do better, 5 axis, sim, dual chuck lathe, millturn, what is left to be said? Shut the fuck up, I can not only make that buggy Tinman, but machine for you the engine?
I'll design the whole bots assembly line as well so I can be sure to never need you.
Yeep, Topsolid 7 gives me the power and claim to any bragging rights that cna be attained in such a site, deal with it, I dont even care about OU.
You could do such things youself, if you knew Topsolid 7, but you dont.
Please let this thread die, you are not worthy of my designs.
Quote from: ARMCORTEX on April 24, 2016, 05:34:06 PM
Haha Temporal, you are innocent kid, you willingly show me screen via Chat video, of supposedly 3kw self generator, anything you show, is fair game at this point.
You always seem to go back to this, I will say it once and for all, your designs are/were useless, I never shared nor analysed your design, in autocad, cheap old autocad, or was it freecad? Haha...
I designed mine in Topsolid 7. State of the art software for OU design and industrial production toolchain. I clearly surpass all of you due to my superior skills in Topsolid 7.
Whatever you can do, I can do better, 5 axis, sim, dual chuck lathe, millturn, what is left to be said? Shut the fuck up, I can not only make that buggy Tinman, but machine for you the engine?
I'll design the whole bots assembly line as well so I can be sure to never need you.
Yeep, Topsolid 7 gives me the power and claim to any bragging rights that cna be attained in such a site, deal with it, I dont even care about OU.
You could do such things youself, if you knew Topsolid 7, but you dont.
Please let this thread die, you are not worthy of my designs.
My, my what a display of insolent contempt, pride and hubris seasoned with a heaping helping of hypocrisy.
https://en.wikipedia.org/wiki/Hubris
"Hubris (/ˈhjuːbrɪs/, also hybris, from ancient Greek ὕβρις) in a modern context, is insolent contempt that may be defined verbally as extreme or foolish pride or confidence.[1] In its ancient Greek context, it typically describes violent behavior rather than an attitude. The adjectival form of the noun hubris is "hubristic". Hubris is usually perceived as a characteristic of an individual rather than a group, although the group the offender belongs to may unintentionally suffer consequences from the wrongful act. Hubris often indicates a loss of contact with reality and an overestimation of one's own competence, accomplishments or capabilities.
As one might expect, hubris is not necessarily associated with high self-esteem but with highly fluctuating or variable self-esteem, and a gap between inflated self perception and a more modest reality.
Excessive feelings of hubris have a tendency to create conflict, sometimes terminating close relationships; which has led it to be understood as one of the few emotions with no clear positive or adaptive function (Rhodwalt, et al.).
Hubris is generally considered a sin in world religions. C.S. Lewis writes, in Mere Christianity, that pride is the "anti-God" state, the position in which the ego and the self are directly opposed to God: "Unchastity, anger, greed, drunkenness, and all that, are mere fleabites in comparison: it was through Pride that the devil became the devil: Pride leads to every other vice: it is the complete anti-God state of mind."[2]"
You have much to learn ... and you will.
Quote from: ARMCORTEX on April 24, 2016, 05:34:06 PM
Haha Temporal, you are innocent kid, you willingly show me screen via Chat video, of supposedly 3kw self generator, anything you show, is fair game at this point.
You always seem to go back to this, I will say it once and for all, your designs are/were useless, I never shared nor analysed your design, in autocad, cheap old autocad, or was it freecad? Haha...
I designed mine in Topsolid 7. State of the art software for OU design and industrial production toolchain. I clearly surpass all of you due to my superior skills in Topsolid 7.
Whatever you can do, I can do better, 5 axis, sim, dual chuck lathe, millturn, what is left to be said? Shut the fuck up, I can not only make that buggy Tinman, but machine for you the engine?
I'll design the whole bots assembly line as well so I can be sure to never need you.
Yeep, Topsolid 7 gives me the power and claim to any bragging rights that cna be attained in such a site, deal with it, I dont even care about OU.
You could do such things youself, if you knew Topsolid 7, but you dont.
Please let this thread die, you are not worthy of my designs.
Topsolid 7. How much did you pay for that? Or are you running the trial version? Trial versions are available for anyone to try. Other than that if you do have it, did you get it for free?
Mags
Not free, I am still saving for it.
I wanna start my 1 man machine shop.
You can earn a living wage and do cool stuff if you learn a bit of modern technology.
Me I am a big spaceclaim, topsolid fan.
Both have strenght and weakness. Both are the best for the price.
Learn microcontrollers with that, and you can become big time builder of something.
In life, to be awesome, you must master an IDE of ARM microcontrollers, wichever that is, and a Cad and if possible ( CAM system)
Then you will be in control of the future. This abstraction layer of higher knowledge allows for common man, with common sense, to elevate himself.
Not true !
You have placed all your money on a horse that can only power up some simple lights with resonance and a dumb magnetic drive ! All micro controllers can do is help to tune up to a certain resonant frequency ! That thing you see has been around the free energy circuit for many years and its had its day but will never boil the diner or power the car .... Try a ship or plane ect ect ect !!
The claim of 1 kw than 10 kw hahahah bonkers more like 10 watts with resonance hahaha ! You make a fatal error of judgement on energy values if you judge the power by the ratings written for the bulbs ... Also the bulbs are element 9 no 90 ! Do you know what that means ?
NO you dont know what that means and you dont know how to tune up for resonance and I am convinced you have never built anything more than a train set ...
Resonance is not real power it does not have the amps ! You can only power up high resistant loads like lights or some low energy heating elements and it does not support the national grid ... The majority of people dont want a stupid machine in the house they just want safe clean altar cheap energy.
Your thoughts are very shallow and some what empty of facts and lacking knowledge .. This it through and try normal energy that is the kind that heats water like central heating and your resonant generator is going to have a real problem ...
Also resonant energy has many health and safety problems facing it because if you find the resonate frequency of water and you are standing close to it your blood will also boil ...
In fact just by messing around with resonance can kill you or some one else like your neighbour ! It has so much more research to be Carrie out that it will take 20 years work with a large team and around $100 000 000 ...
Let me also inform you of hidden international agreements held by government's and there about advanced weapon systems made by resonance energy technology ...... The man in the video will never sale anything beyond his own private network and he will never tel you or show you how he has tuned the circuit ... And to right to but good luck to him if he lives long enough ?
Also let me inform you that if you want a stable planet in the next 50 000 years its a good idea to use up all your gas and burn it and save some oil ! Right now the per ma frost gas from Russia alone is enough to destroy all life on this rock due to global warming ! But global warming is not man made and to be truthful all the planets in the solar system are all heating up ! Are you thinking that is man made ? No its because of many problems we now face as when the solar system is increasing its overall speed. All the planets and there cores are driving there atmospheres to heat up !! This is not funny and is kept mostly as a secret from you !!
You want free energy but you dont want to do the health and safety so your dumb stupid greed is driving you and that will only become your undoing so take this as a warning. Also the need for qualified zero point engineers and a real accepted academic qualification for zero point is the most important thing to achieve not a bunch of DIY cowboys running around with resonate generators that they have no idea how they do what they do or what the health and safety problems the public will soon face with it all ... ?????
The new war is here now so are you going to give the enemy a new deadly weapon ? Or do they already have it ??? The lack of detail in this research is most concerning to me and the implications have no study to go by and chaos leads the way forward. Its not a gold rush its not a mountain to dig up and sale and your not going to save humanity with it so stop the stupidity ASAP GET REAL AND DO IT RIGHT OR DONT DO IT AT ALL .
Now lets get back to basics what is resonance and why does it work ?
So, "Gofundme" really go funding or helping someone with potentials. hmmmmmmmmmmm ;)
i like it,
sorry i was just born yesterday. :D
Good info!. ;)
Nono, Microcontroller is power of circuit making, but with small foortprint and 20x cheaper than cmos, more flexible.
Today, you cannot be electronic hobbyist without this knowledge. And now, due to STM32 Cubemx abstraction layer, even ARM is simplified.
Overunity would be nice to have, but 99.999% of people, will not find overunity.
It would be a wise thing, to learn useful things, as you research.
That way you did not waste your time.
And also, CAD/CAM, learn these 2 things and you can build something that is not OU, but still a profitable invention.
Those who are smart, who make money, dont like to waste time in fruitless projects. Those who are smart, think of plan B.
I believe the Overunity community should wise up to this reality, that they will probably not get their hands on a device, ever.
I have 9 different over-unity generators and ways to make them available ! But for most its like walking through mud as to grasp the technical side of it .
Bashra self resonating coil is of interest and should be one that many here could make in an hour for a few $ or less ! The main thing is to know what you are trying to power with free energy and design to that ! Field harmonics will increase the amps for a self resonating system and all 3 phase AC generators produce harmonics.
I would strongly recommend looking at the Bashra free energy coil .
Quote from: ARMCORTEX on April 25, 2016, 06:00:38 PM
Nono, Microcontroller is power of circuit making, but with small foortprint and 20x cheaper than cmos, more flexible.
Today, you cannot be electronic hobbyist without this knowledge. And now, due to STM32 Cubemx abstraction layer, even ARM is simplified.
It would be a wise thing, to learn useful things, as you research.
That way you did not waste your time.
And also, CAD/CAM, learn these 2 things and you can build something that is not OU, but still a profitable invention.
Those who are smart, who make money, dont like to waste time in fruitless projects. Those who are smart, think of plan B.
I believe the Overunity community should wise up to this reality, that they will probably not get their hands on a device, ever.
QuoteOverunity would be nice to have, but 99.999% of people, will not find overunity.
There will never be Overunity,but only a non/understanding of where the extra energy is coming from.
Brad
The guy who has 9 overunity generators who still visits this site instead of enjoying life is most likely bullshitting.
No, nobody who has a functionnal overunity generator visits this site.
Nobody from this site will ever produce infinite energy, we would have seen it by now, after 10 years.
Nothing has changed, in fact, it has worsened.
Overunity is a waste of time.
I like to talk to people is that wrong ? No ! Over-unity comes from many different arrangements but they all have resonance and harmonics and fractal harmonics. The so called ambient ones rely on the same things and tesla was never the OU master people think he is ! But it does not matter and the Russians are just doing the same thing !
What you need to learn is formula does not exist in a slandered over unity technology its all been trial and error and the facts to me are very clear but to many chiefs spoil the broth and not enough unity among the builders ! I ahve tried so many times to build unity among men but I now give up ....
So how much power do you require ? The first place to start is harmonics and you just use a lap top with an audacity sound recording program ! There is a great secret to this one and it will help you learn where the fuel comes from if you want real power with real amps not just resonance with some lights ..
The Basher coil is self resonant and you need to know why it does that and to me its not space energy its just an alinement's of the wires natural EMF BUT ITS NOT A VORTEX ITS A HARMONIC RESONANCE of the metal ... Remember everything is spinning so everything has resonance ... Electrons like to move if you let them as just like a train needs a track electrons need the right angle of vector to create flow .
The study of this is best seen with fine nickel wire over a 2.2 inch plastic tube ! You will see that a 3 metre length will resist current but if you spiral it on the tube it will pass current !
The relationship between harmonics fractal harmonics and a self resonance coil is all you need to learn if you wish to master abundance of free energy ! Also there are some other things to include like interference can just switch off the flow and this can become a problem depending on what you require the energy to do .....
Tin man presented an original concept and it has many applications including off setting gravity like a bee ... ! So why do you want free energy ???? To me its my duty as a human to become completely independent from most of the problems of humanity and energy of this kind does far more that just making heat and lights.
Resonance can increase the growth of plants and in theory completely heal and cure any problems of the health including genetic problems and is how we live after death ..... So its very important !
Stop being an angry spoilt young man and live a bit ! All 3 phase AC generators produce harmonics so add resonance ect ect this is a good way to go ..... Or do it like the Russians but they cant power up a hand drill or a car ect ect hahahah but I can !
I deal in unity first than we will see what happens after that !
Quote from: DR.WHO on April 26, 2016, 12:05:36 AM
I like to talk to people is that wrong ? No ! Over-unity comes from many different arrangements but they all have resonance and harmonics and fractal harmonics. The so called ambient ones rely on the same things and tesla was never the OU master people think he is ! But it does not matter and the Russians are just doing the same thing !
What you need to learn is formula does not exist in a slandered over unity technology its all been trial and error and the facts to me are very clear but to many chiefs spoil the broth and not enough unity among the builders ! I ahve tried so many times to build unity among men but I now give up ....
So how much power do you require ? The first place to start is harmonics and you just use a lap top with an audacity sound recording program ! There is a great secret to this one and it will help you learn where the fuel comes from if you want real power with real amps not just resonance with some lights ..
The Basher coil is self resonant and you need to know why it does that and to me its not space energy its just an alinement's of the wires natural EMF BUT ITS NOT A VORTEX ITS A HARMONIC RESONANCE of the metal ... Remember everything is spinning so everything has resonance ... Electrons like to move if you let them as just like a train needs a track electrons need the right angle of vector to create flow .
The study of this is best seen with fine nickel wire over a 2.2 inch plastic tube ! You will see that a 3 metre length will resist current but if you spiral it on the tube it will pass current !
The relationship between harmonics fractal harmonics and a self resonance coil is all you need to learn if you wish to master abundance of free energy ! Also there are some other things to include like interference can just switch off the flow and this can become a problem depending on what you require the energy to do .....
Tin man presented an original concept and it has many applications including off setting gravity like a bee ... ! So why do you want free energy ???? To me its my duty as a human to become completely independent from most of the problems of humanity and energy of this kind does far more that just making heat and lights.
Resonance can increase the growth of plants and in theory completely heal and cure any problems of the health including genetic problems and is how we live after death ..... So its very important !
Stop being an angry spoilt young man and live a bit ! All 3 phase AC generators produce harmonics so add resonance ect ect this is a good way to go ..... Or do it like the Russians but they cant power up a hand drill or a car ect ect hahahah but I can !
I deal in unity first than we will see what happens after that !
I read this and agree with you, even on the mud part above. ;D
"Unity first" is a must with me as well.
Quote from: ARMCORTEX on April 25, 2016, 08:18:18 PM
QuoteThe guy who has 9 overunity generators who still visits this site instead of enjoying life is most likely bullshitting.
You need to get this !!overunity!! bullshit out of your head-there is no such thing as !overunity! period.
As i said,those that may one day see an overunity device,are those that are blind to the source of energy.
QuoteNobody from this site will ever produce infinite energy, we would have seen it by now, after 10 years.
Says a man that exists in a universe that is expanding at an increasing speed.
QuoteOverunity is a waste of time.
Overunity is only confusion,and misunderstanding--there is no such thing as !overunity!.
Brad
Quote from: DR.WHO on April 26, 2016, 12:05:36 AM
The Basher coil is self resonant
All real coils are resonant due to their self-inductance and distributed capacitance between windings as well as due to transmission-line phenomena such as reflections from impedance mismatches and their constructive interference.
Quote from: DR.WHO on April 26, 2016, 12:05:36 AM
... ITS A HARMONIC RESONANCE of the metal ... Remember everything is spinning so everything has resonance ... Electrons like to move if you let them ...
Electrons resonate at GHz frequencies.
Quote from: DR.WHO on April 26, 2016, 12:05:36 AM
The study of this is best seen with fine nickel wire over a 2.2 inch plastic tube !
Are you referring to the nickel resonance at lower frequencies (MHz) ?
Quote from: tinman on April 26, 2016, 09:35:57 AM
You need to get this !!overunity!! bullshit out of your head-there is no such thing as !overunity! period.
As i said,those that may one day see an overunity device,are those that are blind to the source of energy.
Brad
Bingo. I have said this a bunch of times on this forum. Once you "discover" the power source, and name it (if indeed it is a new one) then the p in and p out calculations balance out and we have.....
Unity.
Mother nature is a beautiful thing.
Bill
PS I must say that the title of this topic area was a pretty rude thing to do. It certainly shows everyone the lack of character one must have to do such a thing. Sort of like pissing into the wind...it comes back on you.
I am not saying its not possible, I am saying that nobody from this site will get the overunity project revealed to them.
Steven Marks probably made it.
But he was a scientist who had something of worth, he did not tell.
Its already been 10 years, why would this year, or the next be any different?
It might be better to play lottery, some people win the lottery.
Quote from: Pirate88179 on April 26, 2016, 08:53:33 PM
........
PS I must say that the title of this topic area was a pretty rude thing to do. It certainly shows everyone the lack of character one must have to do such a thing. Sort of like pissing into the wind...it comes back on you.
Truth he has yet to learn.
This is a multi verse universe ! If energy enters this universe and is used to do work than the term over unity is correct ! I stand my ground and again say I have 9 over-unity technologies.
I dont do limitations or question the source of the energy I just use it to do work with !!! Get real !!!! Think outside the box or find the other box inside the box you are in and if its a bigger box than you thought it was than except that your reality is in question ..
So than as this now conforms the existence of over unity get on with the show .. lol x
Quote from: DR.WHO on April 27, 2016, 08:36:18 PM
This is a multi verse universe ! If energy enters this universe and is used to do work than the term over unity is correct ! I stand my ground and again say I have 9 over-unity technologies.
I dont do limitations or question the source of the energy I just use it to do work with !!! Get real !!!! Think outside the box or find the other box inside the box you are in and if its a bigger box than you thought it was than except that your reality is in question ..
So than as this now conforms the existence of over unity get on with the show .. lol x
I stand my ground and say that you have 9 examples of measurement error. Go ahead and prove me wrong...you can't and we both know why.
Bill
He who has no yt videos, has no bragging rights.
Me I have made many videos, you do not have respect yet.
No non, me I have my original idea, that nobody know but me, the real secret, to the power pulse slingshot method for flywheel.
Stop to pretend.
Quote from: ARMCORTEX on April 27, 2016, 09:36:54 PM
He who has no yt videos, has no bragging rights.
Me I have made many videos, you do not have respect yet.
No non, me I have my original idea, that nobody know but me, the real secret, to the power pulse slingshot method for flywheel.
Stop to pretend.
Well then I must be full of bragging rights as my YT video count is 93. ;D How many vids do you have? ???
Mags
Good for you, I was referring to DR. WHO.
He is saying he has 9 working device but never showed us his YT.
Guy dont even got a single YT video to show for his big mouth, what a scrub.
Quote from: ARMCORTEX on April 28, 2016, 06:11:20 PM
Good for you, I was referring to DR. WHO.
He is saying he has 9 working device but never showed us his YT.
Guy dont even got a single YT video to show for his big mouth, what a scrub.
Look in the mirror ;D
Brad
Quote from: Pirate88179 on April 26, 2016, 08:53:33 PM
Bingo. I have said this a bunch of times on this forum. Once you "discover" the power source, and name it (if indeed it is a new one) then the p in and p out calculations balance out and we have.....
Unity.
Mother nature is a beautiful thing.
Bill
QuotePS I must say that the title of this topic area was a pretty rude thing to do. It certainly shows everyone the lack of character one must have to do such a thing. Sort of like pissing into the wind...it comes back on you.
As you can see,myself and Mag's have taken it to heart,and are most upset ;D
I think it's more a case that Tex is board,and trying to create a distraction--away from real researchers on this forum.
As you can see,Tex has nothing but pretty picture's,and not one single working device. ;)
Brad
I have 9 over unity generators ! I except that is hard to except and even the term over unity extends the none event horizon of normal physics ! But some of us witness things that are not of this world or have any component of its energy that originated from our known universe ! And one must only consider that we have not understood what is below the plank level and what is out side our expanding universe or what are the effects of a multi verse.
We now see them but not in M I T research but in the research of the individual that by chance finds them ! Resonance and self resonating examples now exist and some offer an over unity result like the Basher coil ! Make one your self than go and see with your own instruments its self resonance as a field that can be used in many ways.
This coil alone can do many things ! But if I add that to my collection than I would have 10 over unity technologies .. One of mine contradict what the Doppler effect says is possible others are also number generators that affect time and space in ways that I my self find hard to explain.
Do not question my experiences or that of others but stay focused on mechanical resonance ! It is a very wide reality and we could be here for billions of years exploring it so I would suggest to pick a work function and explore resonance that has a job to do !
If I had two bells 3000 miles apart from each other how can I have both ringing at the same time and only sound one bell ? It is done with atoms and it can be done with a mass of atoms like two bells... And it can get very strange if that is what you want to explore ? Also on the extra ordinary side to resonance meta resonance !
What if two dimensions were to resonate or more ? the list is endless ! But chose the work function first .
No I am just bored of discussing things with people with no inventive spirit or logic.
Nothing more to talk about.
Tinman you are a very annoying idiot on YT and on the other flywheel threads, my suggestion is that you should shut the f*** up, you hack.
Its not because you disagreed with me, about the fact there is nothing to these flywheels vs me saying there is a something, that you are gonna barge into videos and threads.
Shut up and let the discussion evolve, you are not 'in the know' of the facts, I have been getting messages from some experimenters, the flywheel lasts forever when unloaded.
Forever is what I was told, now shut up. I wanna know what happened to these people, whats in that metal box.
https://www.youtube.com/watch?v=vCkID5jDZks
https://www.youtube.com/watch?v=vkbeTlqlLr4
sorry tinman i have to disagree. there such thing as over unity a permanent magnet is over unity. it will hold my calendar on my fridge door indefinitely it is doing work resisting the force of gravity downwards to the center of the earth..sorry i have to rush i am going fishing to try catching some big mother trevalies.. praslin seychelles..
a flywheel will gain energy only if it is perpendicular to gravity force and i has to be traveling faster than gravity ..which is 9.80665 m/s^2..
Quote from: ARMCORTEX on April 28, 2016, 06:11:20 PM
Good for you, I was referring to DR. WHO.
He is saying he has 9 working device but never showed us his YT.
Guy dont even got a single YT video to show for his big mouth, what a scrub.
No no
This thread is about me and Mags-says so in the title :D
I have 300+ videos ,so im high grade lol
Brad
Quote from: ARMCORTEX on April 28, 2016, 09:37:09 PM
No I am just bored of discussing things with people with no inventive spirit or logic.
Nothing more to talk about.
Tinman you are a very annoying idiot on YT and on the other flywheel threads, my suggestion is that you should shut the f*** up, you hack.
Its not because you disagreed with me, about the fact there is nothing to these flywheels vs me saying there is a something, that you are gonna barge into videos and threads.
Shut up and let the discussion evolve, you are not 'in the know' of the facts, I have been getting messages from some experimenters, the flywheel lasts forever when unloaded.
Forever is what I was told, now shut up. I wanna know what happened to these people, whats in that metal box.
https://www.youtube.com/watch?v=vCkID5jDZks
https://www.youtube.com/watch?v=vkbeTlqlLr4
All mouth-no action-your life story.
I will speak my mind when ever the hell i like,and a sniveling little ferret like you cant do a thing about it.
You have no understanding at all about such basic things as flywheels--you cant even transfer simple files from one computer to the next without screwing it up lol.
Brad
Quote from: seychelles on April 28, 2016, 09:59:03 PM
sorry tinman i have to disagree. there such thing as over unity a permanent magnet is over unity. it will hold my calendar on my fridge door indefinitely it is doing work resisting the force of gravity downwards to the center of the earth..sorry i have to rush i am going fishing to try catching some big mother trevalies.. praslin seychelles..
https://en.wikipedia.org/wiki/Work_%28physics%29 (https://en.wikipedia.org/wiki/Work_%28physics%29)
"In physics (https://en.wikipedia.org/wiki/Physics), a force (https://en.wikipedia.org/wiki/Force) is said to do
work if, when acting on a body, there is a displacement of the point of application in the direction of the force."
"The work done by a constant force of magnitude F on a point that moves a displacement (not distance) s in the direction of the force is the product." W=Fs.
Since there is no displacement in your fridge magnet example, no work is being done so therefore, no overunity magnets....sorry.
Bill
I now know more than you about the flywheel, because I respect the people that deserve respect.
Unlike you, who has argued but was not totally aware of facts.
Now you will have to backtrack.
Your reasoning is the following: Me I know all about the flywheel, nope it will never work, because physics says so, but I am a believer, and visit Overunity.com
I wont be coming here anymore, I am excited for other things, I dont appreciate discussing with the likes of you.
so what do you call it then ,the magnet force that contact with the iron in the fridge DOOR THAT counter act the gravitational force is displacement.. Another FREE ENERGY ELEMENT IS PLUTONIUM, URANIUM, ..
MY prediction it would not be long until one hears of an alloy compound that will have anti gravity properties..just like a permanent magnet..very likely the US air force already have it..
Quote from: Pirate88179 on April 29, 2016, 12:48:06 AM
https://en.wikipedia.org/wiki/Work_%28physics%29 (https://en.wikipedia.org/wiki/Work_%28physics%29)
"In physics (https://en.wikipedia.org/wiki/Physics), a force (https://en.wikipedia.org/wiki/Force) is said to do work if, when acting on a body, there is a displacement of the point of application in the direction of the force."
"The work done by a constant force of magnitude F on a point that moves a displacement (not distance) s in the direction of the force is the product." W=Fs.
Since there is no displacement in your fridge magnet example, no work is being done so therefore, no overunity magnets....sorry.
Bill
Bill
If a magnetic field can bend light,would this be considered a displacement force?
And yes,a magnet holding a piece of paper to your fridge is not doing work.
Brad
author=ARMCORTEX link=topic=16550.msg482375#msg482375 date=1461906884
QuoteI now know more than you about the flywheel, because I respect the people that deserve respect.
Lol-i doubt that very much.
We have seen your respect here many time's,and it sucks.
QuoteUnlike you, who has argued but was not totally aware of facts.
Now you will have to backtrack
Example ?.
QuoteYour reasoning is the following: Me I know all about the flywheel, nope it will never work, because physics says so, but I am a believer, and visit Overunity.com
You bet ya. Care to prove me wrong?-->oh thats right-you have nothing.
QuoteI wont be coming here anymore,
Excellent.
QuoteI am excited for other things, I dont appreciate discussing with the likes of you.
Your only leaving because you know i would make you look silly,and prove your theories to be rubbish. Your running from a fight you know you could never win.
In fact,your disrespec and attempt to degrade myself and Mag's was your undoing.
You had another epic fail.
Have a nice day ;D
Brad
Hey Brad
You know these setups with like say 4 alternators running off a flywheel driven by 1 dc motor? Was thinking about the gain of say 4 speakers vs 1 speaker we were discussing earlier. I wonder if it is the same gain if we use 4 motors at a tot of 100w in vs 1 motor at 100w in. Its not a common thing to do to have gangs of electric motors to drive a load. So I wonder if we can take advantage of that gain if there is a gain such as what we know of speakers and in your tests on that with your resonance assy.
What Im thinking is that increased surface area is more efficiency with the same input applied. 4 speakers have more cone surface area than 1 speaker with the same input. more cone area, more coil/mag surface area, so maybe being more motors will have more coil/mag surface area, perhaps eff can be increased this way.
Say if we had a motor that was 85% eff at 100w, would 4 motors ganged be better than 85% at a total of 100w? ??? Or simply the same with 1 vs more alternators. ???
All this we have played with made me think and wonder if what some of these guys have with the motor driving the flywheel and it driving say 4 alternators may be something. Wierd stuff if it is so. ;)
Mags
Quote from: Magluvin on April 29, 2016, 08:09:42 PM
Hey Brad
You know these setups with like say 4 alternators running off a flywheel driven by 1 dc motor? Was thinking about the gain of say 4 speakers vs say 1 speaker we were discussing earlier. I wonder if it is the same gain if we use 4 motors at a tot of 100w in vs 1 motor at 100w in. Its not a common thing to do to have gangs of electric motors to drive a load. So I wonder if we can take advantage of that gain if there is a gain such as what we know of speakers and in your tests on that with your resonance assy.
What Im thinking is that increased surface area is more efficiency with the same input applied. 4 speakers have more cone surface area than 1 speaker with the same input. more cone area, more coil/mag surface area, so maybe being more motors will have more coil/mag surface area, perhaps eff can be increased this way.
Say if we had a motor that was 85% eff at 100w, would 4 motors ganged be better than 85% at a total of 100w? ??? Or simply the same with 1 vs more alternators. ???
All this we have played with made me think and wonder if what some of these guys have with the motor driving the flywheel and it driving say 4 alternators may be something. Wierd stuff if it is so. ;)
Mags
Just my 2 cents, I do not think this will improve efficiency at all, but, please go ahead and test if you guys want to...because I am not sure 100%. It just seems to me that one larger motor would be more efficient in any set-up than 4 motors of 1/4 the rating of the large one.
My main problem is that this would increase the losses x 4 due to increased friction, etc.
Bill
Quote from: Pirate88179 on April 29, 2016, 08:46:45 PM
Just my 2 cents, I do not think this will improve efficiency at all, but, please go ahead and test if you guys want to...because I am not sure 100%. It just seems to me that one larger motor would be more efficient in any set-up than 4 motors of 1/4 the rating of the large one.
My main problem is that this would increase the losses x 4 due to increased friction, etc.
Bill
Hey Bill
Yeah, it 'sounds' silly, dont it?.. Here is an example you may have seen from me before......
Say we have 1 speaker and we play a tone with it at 100w and we get 100db out. Now if we increase the input to the speaker to 200w we get 103db out. So 3db increase in output for a doubling of power in. If the input were 50w we would have 97db out, 3 db down.
Now if you add another identical speaker also with 100w, total 200w, we get 106db for an increase of 6db.
1 speaker at 200w is 103db output
2 speakers with 100w each will give 106db output
So the gain happened because of using 2 speakers vs 1 speaker. Both tests consuming 200w. ;)
So now, if we have 1 speaker at 100w and we get 100db, and then we reduce the power in to 50w, we get 97db.
Now like the previous example, we add another speaker at 50w, we increase 6db, bringing that 97db up to 103db.
So, 1 speaker at 100w in is 100db out, and 2 speakers at 50w each is 103db out, for an increase of 3db out by applying the same total amount of power in as 1 speaker, and the only thing that changed is the addition of another speaker using a total input as we put into 1 speaker. ;)
1 speaker at 100w is 100db
2 speakers at a total of 100w, 50w each is 103 db
4 speakers at a total of 100w, 25w each is 106db
8 speakers at a total of 100w, 12.5w each is 109db
16 speakers at a total of 100w, 6.25w each is 112db
And so on......
Guys used to do car audio shows using this method of increasing output for DB dragracing while staying in a lower watt classes. ;)
So 16 speakers vs 1 speaker has a 12db increase with the same input. And these speakers have their losses that add up also like you said about motors. ;) ;)
It is said that a 10 db increase is a doubling of the loudness of sound. 3db is just a noticeable difference by ear.
Mags
Also Brad did a 1 coil input vs 2 coils driving his resonance pendulum and was able to reduce his input with 2 coils to get the same output. So other than the speakers, he has confirmed the phenomenon in a different way where the output was electrical, not sound waves. ;) ;)
Thats my 2 silver dollars. ;D ;D
Mags
Quote from: Magluvin on April 29, 2016, 09:36:45 PM
Also Brad did a 1 coil input vs 2 coils driving his resonance pendulum and was able to reduce his input with 2 coils to get the same output. So other than the speakers, he has confirmed the phenomenon in a different way where the output was electrical, not sound waves. ;) ;)
Thats my 2 silver dollars. ;D ;D
Mags
OK.
I have two 12 oz. beers here and one 24 oz beer also. I just drank all of them.
What was the question again?
Bill
Was that American beer, Bill?
"Also Brad did a 1 coil input vs 2 coils driving his resonance pendulum and was able to reduce his input with 2 coils to get the same output. So other than the speakers, he has confirmed the phenomenon in a different way where the output was electrical, not sound waves.
Thats my 2 silver dollars." Define 'output' units and measurement protocol.
Quote from: Pirate88179 on April 29, 2016, 09:43:32 PM
OK.
I have two 12 oz. beers here and one 24 oz beer also. I just drank all of them.
What was the question again?
Bill
lol yeah. I can only have 1 maybe 2 beers these days. Just stopped altogether some years ago. But I have an occasional here n there. 2 beers seems like 5 or 6 for me now. Im 50yrs old.
Read the post before the one you replied to.
Mags
You have to use the logarithm of the number 9 in numerological terms to create a free energy set up in mechanical resonance ! Plug that tuning fork into a lap top audacity program and set up the harmonics in the 9 ...
The more harmonics you set up the louder the sound gets with no increase in current after the 9th harmonic .. On my lap top I can have 5000 tracks in audacity how much free energy was you thinking off ???
Avoid limited physics ! you need fractal harmonics but you need them in the numerological codes of the 9 ... !!! Its that simple !!!
Quote from: memoryman on April 29, 2016, 09:47:06 PM
Was that American beer, Bill?
"Also Brad did a 1 coil input vs 2 coils driving his resonance pendulum and was able to reduce his input with 2 coils to get the same output. So other than the speakers, he has confirmed the phenomenon in a different way where the output was electrical, not sound waves.
Thats my 2 silver dollars." Define 'output' units and measurement protocol.
He had a pickup coil driven by the vibrating magnet with a 5ohm resistor as the load measured with a scope. The numbers dont really matter if they were the same in both tests. ;) It was either the 'Joule Thief 101' thread or 'Mechanical Resonance(projects)' thread. Not the Mechanical Resonance (Projects unlike forum hacks Tinman and Magluvin) as in, this thread. ;)
Mags
Quote from: DR.WHO on April 29, 2016, 09:52:29 PM
You have to use the logarithm of the number 9 in numerological terms to create a free energy set up in mechanical resonance ! Plug that tuning fork into a lap top audacity program and set up the harmonics in the 9 ...
The more harmonics you set up the louder the sound gets with no increase in current after the 9th harmonic .. On my lap top I can have 5000 tracks in audacity how much free energy was you thinking off ???
Avoid limited physics ! you need fractal harmonics but you need them in the numerological codes of the 9 ... !!! Its that simple !!!
Used to use Audacity a lot. probably is better these days. Can you upload a file to put in audacity to show what you are talking about? What version of Audacity do you use?
Mags
Haha, such spewing of bullshit.
Pendulum motion with speakers is a pure novelty brought to you by Magluvin and Tinman.
As are these wanna be claims by Dr. Who, clearly you are all unreachable, psychotic almost in your subbornness, not at all scientific approach.
See the image posted on the first page, that guy clearly introduced you to phenomenon of damping, you should go and study that.
The pendulum concept idea with speakers is a non-starter, show me to the huge builds that came before you?
Where exactly did you get this idea, or did you just pop it out of your ass?
Show me the youtube videos, that leads you to believe this is a valid approach.
Quote from: Magluvin on April 29, 2016, 09:49:50 PM
lol yeah. I can only have 1 maybe 2 beers these days. Just stopped altogether some years ago. But I have an occasional here n there. 2 beers seems like 5 or 6 for me now. Im 50yrs old.
Read the post before the one you replied to.
Mags
It was indeed American beer and I am 58! But I feel like 35...well...maybe some days...ha ha.
Bill
Quote from: ARMCORTEX on April 29, 2016, 10:12:14 PM
Haha, such spewing of bullshit.
Pendulum motion with speakers is a pure novelty brought to you by Magluvin and Tinman.
As are these wanna be claims by Dr. Who, clearly you are all unreachable, psychotic almost in your subbornness, not at all scientific approach.
See the image posted on the first page, that guy clearly introduced you to phenomenon of damping, you should go and study that.
The pendulum concept idea with speakers is a non-starter, show me to the huge builds that came before you?
Where exactly did you get this idea, or did you just pop it out of your ass?
Show me the youtube videos, that leads you to believe this is a valid approach.
Dude, show me your YT vids that show anything of value to anyone here. ;) You demand that we show you something, yet you make claims of having ideas that we dont know about. Sooo, your rules are for us to show you but you wont show us? What, are you here to push people to show ideas so you can steal them?? Get a grip dude.
Mags
Alot of those are based on Bobby Premarajan, look it up dude.
Anyways. just so you know, Bobby did not get OU also.
This did not come out of my ass, some stuff I modify and itirate from.
I am here calculating my odds like everyone else, tyring to get ideas from other people...
You call this stealing? Boy, you dont know much about law dont you.
Google image it, youtube it.
Now your turn, show me the huge build video that came before you.
Quote from: Magluvin on April 29, 2016, 10:22:35 PM
Dude, show me your YT vids that show anything of value to anyone here. ;) You demand that we show you something, yet you make claims of having ideas that we dont know about. Sooo, your rules are for us to show you but you wont show us? What, are you here to push people to show ideas so you can steal them?? Get a grip dude.
Mags
Mags:
If he had a grip, he would not have started this topic. No sane person would have.
Bill
Quote from: Pirate88179 on April 29, 2016, 10:27:11 PM
Mags:
If he had a grip, he would not have started this topic. No sane person would have.
Bill
This, this forum must be cleansed and purified, by sanity.
And this thread achieves this.
My idea is based on the theory by Nasa, that if you slingshot a shuttle around a planet, and break at the best moment, the shuttle will gain overunity energy.
I am trying to get the essence of that box, via my own method, I have a theory for that box, I also read a few theories about flywheels.
My idea is a mix of all of these things wrapped in an idea, wich is why I am not sharing it.
https://www.youtube.com/watch?v=Hr67j71NSsQ
Quote from: ARMCORTEX on April 29, 2016, 10:28:14 PM
This, this forum must be cleansed and purified, by sanity.
And this thread achieves this.
My idea is based on the theory by Nasa, that if you slingshot a shuttle around a planet, and break at the best moment, the shuttle will gain overunity energy.
I am trying to get the essence of that box, via my own method, I have a theory for that box, I also read a few theories about flywheels.
My idea is a mix of all of these things wrapped in an idea, wich is why I am not sharing it.
https://www.youtube.com/watch?v=Hr67j71NSsQ (https://www.youtube.com/watch?v=Hr67j71NSsQ)
If you are talking about what they did with the Voyager probe, and some others, then when they used the "slingshot" method, this preserved energy already input into the spacecraft by rocket boosters and helped the ship continue on its way around the solar system without needing any additional energy input. The key work here is additional. This was just an efficient way to maintain the flight of the spacecraft without loosing much energy. It was NOT an Overunity ploy to gain energy. Don't forget, voyager was already traveling over 25,000 mph when it left earth's orbit. A lot of energy there.
Bill
author=ARMCORTEX link=topic=16550.msg482470#msg482470 date=1461983294]
QuoteThis, this forum must be cleansed and purified, by sanity.
Well that leaves you out :D
QuoteAnd this thread achieves this.
This thread is no longer your's--ma and Mags are taking over lol.
QuoteMy idea is based on the theory by Nasa, that if you slingshot a shuttle around a planet, and break at the best moment, the shuttle will gain overunity energy.
And there you have a classic example of -!brain dead!
No idea at all of how things work.
QuoteI am trying to get the essence of that box, via my own method, I have a theory for that box, I also read a few theories about flywheels.
And bla bla bla.
QuoteMy idea is a mix of all of these things wrapped in an idea, wich is why I am not sharing it.
Yes-please spare us the laughter.
Thought you were leaving?--hurry on then.
Brad
Dont change the subject, show me the dam video that leads you to believe the speaker approach is a valid one.
As for me, to break or to pulse, goes with what I saw, it doesnt matter, its not 100% that, its just a stating point for something else.
Quote from: tinman on April 29, 2016, 05:48:24 AM
Bill
If a magnetic field can bend light,would this be considered a displacement force?
And yes,a magnet holding a piece of paper to your fridge is not doing work.
Brad
Can a magnetic field bend light? We know that gravity does. Hmmm....light is electro-magnetic radiation so, I would not be surprised if this is possible. Would that be considered a displacement? I would think so.
Bill
Quote from: webby1 on April 30, 2016, 12:51:15 AM
Ummm,,
The slingshot does indeed add energy into the spacecraft,, that energy comes form the planet that is providing the assist,, the spacecraft speeds up and there is a very, very,, very very very,,, small deceleration of the doner planet. This is I believe Conservation of Momentum.
What will be found with the flywheel "box", I am reasonably sure, will be a net zero exchange.
OK, well we agree that it is not overunity energy as claimed, which was my point. Your explanation is probably correct...just like when an Astronaut pushes off from the side of the space shuttle...he moves away but, the shuttle also moves in the opposite direction a very, very, very tiny bit as per Newton.
Bill
Quote from: Pirate88179 on April 30, 2016, 09:19:14 AM
Can a magnetic field bend light? We know that gravity does. Hmmm....light is electro-magnetic radiation so, I would not be surprised if this is possible. Would that be considered a displacement? I would think so.
Bill
A magnetic field can indeed bend/rotate light,and so,if this is considered a displacement,and a displacement is considered to be work done,then you know what that means ;)
Brad
I have built a magnet inertia one way directional propulsion system ! Its really cool and very simple to build and its much more powerful than ion or plasma and around 99.9999999 % cheaper hahah
Force is directional or a rocket would not work the rocket I have made is also directional but monopole directionally speaking also I have a powerful warp drive that goes with the complete craft that I am building. The main power source is a resonant harmonic compressor around 12 kw of total free energy.I was going to make it bigger but I thought that would be showing off hahaha
Why I am on the subject I also have a reverse gravity inverter and again that is a monopole harmonic system of self inductance but not quite self resonance but I am working on that !
This will not fit negative thought as its so dam positive only a brain that can function in a forward manner can cope with its simplicity ! The only problem I face is humanity and mostly men with boiling envy in there blood ! When you learn that all that you have learned is either a lie or just a tiny drop of the truth and you can except that than you can begin to grow the truth.
I challenge anyone to challenge me but you will have to build what I have invented and that is the only way to learn what I am saying ! But you cant get your head round that one and thats why any free energy system you build will have a ground cable stuck to it hahahhaha that is dumb hahahahah I mean it why would anyone invent a free energy system that is stuck to the ground hahahahah thats not freedom is it hahaha .....
Am I super cleaver ? No how did learn the secrets of freedom ? I did a runner from school and became my own teacher ! Now than that makes me the best there is as I am the only one that knows what I am talking about hahahaha
Tel NASA I CAN GIVE THEM A GOOD PRICE FOR ALL THERE SCRAP HAHAHAHAHAHAHAH So than who wants to go to the moon ? Is there any flat earth people out there ? hahaha no ? Ok by for now lol x
Talk,talk, talk; and very poor spelling/grammar.
Quote from: Erfinder on April 30, 2016, 09:51:02 AM
Why do we allow the math to supersede what we intuit to be true? What common sense screams at us is true? The magnet is doing work, isn't it? It's just not doing work in accordance with the definition of work as qualified by physics.
To say that its not doing work because there is no physical movement is a biased opinion me thinks.....which frame of reference do we use when we speak of relative motion between the two? The polarized body? The force within the polarized body? The fridge? The paper? Gravity? The solar system?
It's been stated on numerous occasions that I shouldn't be here as I don't speak plagiarism..... no sense screaming stuff at folk that they can read for themselves....I like to see things in a manner similar to those who came before me. They existed in a time when ideas were molten, when ideas flowed like hot melted rock. Ideas were grown back then, cultivated and cared for in their day. Their ideas could be changed, modified, or eliminated at will. In their time, ideas had yet to cool and solidify into dogma. It's unfortunate that as they passed, their ideas became our dogma.
Two more cents for the coffee fund.....
Regards
Well, in my opinion, if you did not have a precise definition of "work" then chaos would result in your calculations when attempting to figure out a system.
In other words, is a bookshelf doing work because it holds up books from the floor? How about the walls in your house that hold up the roof? How about a rock sitting in the garden?
I used to get confused about this because if it were me holding all of those books off of the floor like that shelf, I would sure think it felt like "work" to me. Same with me holding up the roof on my house. (If I could, ha ha) But, alas, that is not work according to physics.
Bill
The poor misunderstood Book shelf ..
it yearns for the day it is truly appreciated and not dismissed as
Because !!
--
because works with the Kids ...not so much for others !
Intuition...that itch you just can't scratch !!
Chet
Quote from: Erfinder on April 30, 2016, 12:09:25 PM
I appreciate you taking the time out of your day to entertain my question. I thought I prepared my opinion in a manner which would assure you that I mean what I say and or suggest. It is my hope when I share something that I am not taken for a fool. It would seem that I have been taken for a fool.....
Last time I checked, that which makes a magnet special is that describable, but yet to be qualified substance, if you will, which is moving through and about the polarized body....lots written on what one can do with it, and this based on observing what it does.....in very specific environments, under very specific circumstances....unfortunately, none have evolved their understanding to the point where spelling out exactly what it is has been possible, add to this, that there is no clear understanding of what polarization is either....lots of discussion regarding positive and negative :-X charges, and electrons, the latter may or may not exist. The concept of a "negative charge" just sounds wrong.... As far as electrons go, circuits don't seem to care if they exist or not. Is it even possible to know what polarization is or what it means if we don't know what this thing is that we are polarizing? Being informed of how to polarize something doesn't mean we know what polarization really is, that information is locked away inside the substance we know nothing about.....I think.....anyway..... I am informed of what is stated in the literature, thing is, large pills are difficult, and in many instances, shouldn't be swallowed.
One can assume that the rock has the same substance moving through and about it, however, try as one may, with all of ones might, we observe that a rock cannot be used to hold a piece of paper on the fridge inspite of the fact that it is transmitting and receiving the same substance that the magnet is......did I mention that the rock and magnet have the same mass? Not that it matters.....uh....wait....that does matter....I think....ok...maybe it doesn't...
The bookshelf....I can appreciate where you "wanted" to go with this, and as such will leave it at that.
The definition which you speak of which keeps us from falling into chaos is a valid point. My point is when your priority isn't about making calculations, when you literally do not care about calculations, is your point, while valid, a valid point? We calculate before we "get it", and wonder why we don't have it?! How do we justify quantifying that which we have yet to comprehend? We got something......but there's a problem.....we have no idea what we got..... What are we looking for anyway, and why are we looking for it?
Regards
Believe me, I get what you are saying here. These terms and definitions were invented/created to aid in a better understanding of the world in which we live...and the math helps to explain/predict events which we experience every day.
I suck at math and I am no fan of it but, it does serve a very useful purpose...just look at the space program as but one example.
I have no idea why you might think you were taken as a fool, nothing of the sort was intended by me whatsoever. The rock outside in the garden is holding up dust/dirt/maybe plant life from the ground thereby defying gravity, according to the non-science definition, is all I meant.
What you say about magnetism could also be said about electricity and gravity. It seems all is known of how they perform and what they will do in any given circumstance yet, no one can agree on exactly what they are. That kind of sucks but it is the way it is. Still, mankind has managed to manipulate this understanding to be able to produce the computer and internet which I am now using so, they must be doing something right.
I want to look into more about what Tinman has said about magnetic fields bending light. I always love to learn something new.
Bill
Quote from: ramset on April 30, 2016, 11:25:53 AM
The poor misunderstood Book shelf ..
it yearns for the day it is truly appreciated and not dismissed as
Because !!
--
because works with the Kids ...not so much for others !
Intuition...that itch you just can't scratch !!
Chet
Chet:
Rest assured that one day, the bookshelf will get the credit it has so long deserved. Refrigerator magnets will have to wait a bit longer I am afraid.
Bill
PS I look forward to the day I can market a small bookshelf on Ebay as an anti-gravity device and make millions.
Quote from: tinman on April 30, 2016, 04:29:51 AM
author=ARMCORTEX link=topic=16550.msg482470#msg482470 date=1461983294]
This thread is no longer your's--ma and Mags are taking over lol.
Brad
Lol ;D
Mags
I am waiting on the video, that shows some inventor who spent 1000's on a speaker pendulum device.
If this pendulum idea with speakers is 100% the idea of dumb and dumber, this is not a good starting point.
With all the available subject matter to start with, from greater minds than us, your best bet is to try and find who was real deal, and copy, itirate from that.
Now I have successfully shot down your idea, mission accomplished. :)
Quote from: Pirate88179 on April 30, 2016, 11:17:31 AM
Well, in my opinion, if you did not have a precise definition of "work" then chaos would result in your calculations when attempting to figure out a system.
In other words, is a bookshelf doing work because it holds up books from the floor? How about the walls in your house that hold up the roof? How about a rock sitting in the garden?
I used to get confused about this because if it were me holding all of those books off of the floor like that shelf, I would sure think it felt like "work" to me. Same with me holding up the roof on my house. (If I could, ha ha) But, alas, that is not work according to physics.
Bill
Back in the days, speakers didnt have magnets. They had coils to produce the stator field. So 2 sets of wire were sent to the speaker. DC to the stator coil and audio sig to the voice coil. So now that we have magnets, we have eliminated the need to energize the stator coil.
So we can say that the magnet is replacing something that needed power that was consumed continuously. Efficiency of motors have been greatly enhanced by use of the magnets we have today. From what Ive seen, the stronger the magnet, the better the output of a motor. Imagine a ferrite magnet in a motor, then replace it with a neo mag. Much more efficient. If we were able to reduce the magnets field gradually, the motor would become less and less efficient, all the way to where you get no motor action at all with the same input. And if the motor isnt turning, even more current flows through it. ;) Its not that they didnt have magnets back 'in the days'. Its just that they were not as good as using a coil for the field needed in the stator. ;)
Mags
Mags
Quote from: ARMCORTEX on April 30, 2016, 01:06:40 PM
I am waiting on the video, that shows some inventor who spent 1000's on a speaker pendulum device.
If this pendulum idea with speakers is 100% the idea of dumb and dumber, this is not a good starting point.
With all the available subject matter to start with, from greater minds than us, your best bet is to try and find who was real deal, and copy, itirate from that.
Now I have successfully shot down your idea, mission accomplished. :)
There is no vid. These are my ideas from MY ass. ;)
"With all the available subject matter to start with, from greater minds than us, your best bet is to try and find who was real deal, and copy, itirate from that."
Yeah, well I like to be as original and different with my ideas from MY ass, than to be lazy and copy others work, unlike you. ::)
"Now I have successfully shot down your idea, mission accomplished. :) "
lol. ::) ::) ::)
Mags
Quote from: Magluvin on April 30, 2016, 01:23:27 PM
There is no vid. These are my ideas from MY ass. ;)
"With all the available subject matter to start with, from greater minds than us, your best bet is to try and find who was real deal, and copy, itirate from that."
Yeah, well I like to be as original and different with my ideas from MY ass, than to be lazy and copy others work, unlike you. ::)
"Now I have successfully shot down your idea, mission accomplished. :) "
lol. ::) ::) ::)
Mags
I am keeping this in the record, anytime you talk too much I will bring this up.
You sound like a psychopath when you say such rubbish, you think you are better than the inventors?
You are not a great mind who has patented something working.
This site is about replicating, understanding what the great minds have invented.
Some people out there spent 1000's, hundreds of 1000's, this has value.
Memory man ? IS THAT SOME JOKE ABOUT A BRAIN ? HAHAHA YOUR SO DUMB ! This is not an English test its a physics test ! I dont have time to sit here and write to your rules I dont have rules .........
Your all mouth no brains and an inability to build a box made from Lego ! What are you doing here ? Talking about spelling ? hahahaha Ok spell this yummymummysatonatellytubbyeatingachristmasspuddingwhenupcameaspiderwhosatbesideherandshoutedoutthewordsthereisafuckingspidersittingrightbesideyaandmummytummygotupanddidarunnerleavingbehindherchristmasspuddinghahahah...
WORDS ???? Sorry I only do numbers !!! Idiot !!!
Quote from: ARMCORTEX on April 30, 2016, 01:48:50 PM
I am keeping this in the record, anytime you talk too much I will bring this up.
You sound like a psychopath when you say such rubbish, you think you are better than the inventors?
You are not a great mind who has patented something working.
This site is about replicating, understanding what the great minds have invented.
Some people out there spent 1000's, hundreds of 1000's, this has value.
Keep it. Take a picture. ;) put it in you family album.
"You sound like a psychopath when you say such rubbish, you think you are better than the inventors?"
lol
"You are not a great mind who has patented something working."
Actually, I did have a patent, and I wrote it myself. It was a provisional patent and cost me $75 and it was granted. 1 year protection.
It was remote controlled wheel lighting. The center caps of custom wheels were taken off, drilled for leds aiming radially outward onto the rim, and a 9v battery with rf remote receiver, You could turn the lights on with a remote key fob. I used Lynx rf systems for that back then.
So now the question is, do you or have you had any patents for your ideas?????????? ;) Common now, show us the goods that proves you are what you say we are not. ::) ::) ::) ::) ::) ;) Hypocrite you are, in just about every post you make. ;)
"This site is about replicating, understanding what the great minds have invented."
Oh really? Where are your replications???? If you have none then why are you here??????? You can eat that statement you made. ::) ;) Oh the hypocrisy. ::)
But as we have seen from you so far is that you like to make fun of people here and insult them with just about every post. That is all you have done since you have been here. Show us 1 post from you that has any real value to the readers here. Just 1. There arent any. You are just here to suck up ideas from these people you call fools, while not giving back anything. Nothing. Or you are just a troll. Not a pretty one either.
"Some people out there spent 1000's, hundreds of 1000's, this has value."
And what is that suppose to mean? ???
Mags
Lets not make this about my hypocrisy and bad attitude vs the likes of you on this site, this was about your bad idea.
Where are my replications?
I have made many replications, I have made the Stephen Meyer (Stan Meyer's brother) synthetic circuitry.
I can make, have made, many mechanical designs, have the G-code, I could make it all with raw metal, such is my skill with Spaceclaim and Topsolid 7.
Think of how hardcore I am, I am a machinist, and a designer, able with CAD-CAM, and able in electronics, and microcontrollers ( powerful PLC for 10$).
Wrap your head around this powerful tactic, Topsolid 7, Spaceclaim, Microcontrollers.
I just dont feel its worth paying for the real build, yet, I see more ideas for non-overunity, like house-robots, cooking robots, etc...
I am keeping my eyes open for something big to copy, something that has good odds, I have yet to see this in the overunity sphere, until recently.
ArmPit
your like an Evil Poltergeist that haunts these pages..
so Not only do you never miss an opportunity to insult ,Now you
hold up the "I'm here to steal whatever I can " card !!
You've spent tooo much time with the Machines your turning into an Evil FrankenPit !
where did Stefan Put the torches and the Pitchforks ??
@ Bill
point is I'm not buying the magnets can't do work thing ,nor that Atoms Locked into a specific
"task" aren't actually performing some level of work to maintain their Present State !
However , I do believe that once we truly understand what Magnetism actually is ..we will
have the Keys to the City and most likely be able to Play with matter at the most basic Level
and give it "tasks" to perform at Our whim ?
perhaps we already have this ability on the planet ?
Overunity sites was always a shit festival, where have you been?
Look at all these pages of shit for hundreds of pages.
What difference does it make? ;D
Quote from: ramset on April 30, 2016, 03:52:46 PM
ArmPit
your like an Evil Poltergeist that haunts these pages..
so Not only do you never miss an opportunity to insult ,Now you
hold up the "I'm here to steal whatever I can " card !!
You've spent tooo much time with the Machines your turning into an Evil FrankenPit !
where did Stefan Put the torches and the Pitchforks ??
@ Bill
point is I'm not buying the magnets can't do work thing ,nor that Atoms Locked into a specific
"task" aren't actually performing some level of work to maintain their Present State !
However , I do believe that once we truly understand what Magnetism actually is ..we will
have the Keys to the City and most likely be able to Play with matter at the most basic Level
and give it "tasks" to perform at Our whim ?
perhaps we already have this ability on the planet ?
Well Chet, I have thought a lot about this. What if man made magnets (which are now most of them) are like batteries or capacitors or any other energy storage device. They store the energy input into them which can be used for many things including holding paper on a fridge. What if it could be shown that the energy used to make that magnet equaled the energy required to hold that paper for x amount of time?
So, maybe it is not that they can not do work as much as they are not overunity devices? I don't know. I am not a real physics guy.
Hey, what if we had a magnetic bookshelf attached to a fridge? Now that would be something the MIB might want to know about, ha ha.
Bill
Quote from: ARMCORTEX on April 30, 2016, 02:58:48 PM
Lets not make this about my hypocrisy and bad attitude vs the likes of you on this site, this was about your bad idea.
Where are my replications?
I have made many replications, I have made the Stephen Meyer (Stan Meyer's brother) synthetic circuitry.
I can make, have made, many mechanical designs, have the G-code, I could make it all with raw metal, such is my skill with Spaceclaim and Topsolid 7.
Think of how hardcore I am, I am a machinist, and a designer, able with CAD-CAM, and able in electronics, and microcontrollers ( powerful PLC for 10$).
Wrap your head around this powerful tactic, Topsolid 7, Spaceclaim, Microcontrollers.
I just dont feel its worth paying for the real build, yet, I see more ideas for non-overunity, like house-robots, cooking robots, etc...
I am keeping my eyes open for something big to copy, something that has good odds, I have yet to see this in the overunity sphere, until recently.
Is all this babble about G-codes and CAD-CAM supposed to impress someone? I can write my own G-code and repaired hundreds of machines that used G-code. I also know how to use several CAD-CAM programs. SO WHAT! Who cares. Those skills are just normal skills for someone that has worked in an industrial environment as an electronic tech. Having those skills does not make you someone special. I knew at least 200 hundred people with those same skills in just the one place I worked. Bragging about some skill you have only shows what a small mind you really have. You need to grow up and stop bragging like a 10 year old.
Carroll
Quote from: ramset on April 30, 2016, 03:52:46 PM
ArmPit
your like an Evil Poltergeist that haunts these pages..
so Not only do you never miss an opportunity to insult ,Now you
hold up the "I'm here to steal whatever I can " card !!
You've spent tooo much time with the Machines your turning into an Evil FrankenPit !
where did Stefan Put the torches and the Pitchforks ??
You beat me to it! After all he has admitted/said not much is left to say.
"Truth requires few words" - Chief Joseph
Lawrence Beaudry is a TAKER, not a MAKER.
Quote from: ARMCORTEX on April 30, 2016, 02:58:48 PM
Lets not make this about my hypocrisy and bad attitude vs the likes of you on this site, this was about your bad idea.
Where are my replications?
I have made many replications, I have made the Stephen Meyer (Stan Meyer's brother) synthetic circuitry.
I can make, have made, many mechanical designs, have the G-code, I could make it all with raw metal, such is my skill with Spaceclaim and Topsolid 7.
Think of how hardcore I am, I am a machinist, and a designer, able with CAD-CAM, and able in electronics, and microcontrollers ( powerful PLC for 10$).
Wrap your head around this powerful tactic, Topsolid 7, Spaceclaim, Microcontrollers.
I just dont feel its worth paying for the real build, yet, I see more ideas for non-overunity, like house-robots, cooking robots, etc...
I am keeping my eyes open for something big to copy, something that has good odds, I have yet to see this in the overunity sphere, until recently.
Have you worked out how to transfer pictures from one computer to another without loosing them yet?. ;)
Brad
And you Temporal, are a fraudster.
I remember you were willing to accept 3000$ from me for a device with was 1 meter square supposedly.
You will not find me defrauding people.
You are the last person that should speak.
Me I am the honorable ronin of overunity if anything, I have earned my bragging rights more than once.
I will repeat, Topsolid 7, Spaceclaim, microcontrollers, makes me the biggest maker that posted in this thread.
My superior skills in Topsolid 7, Spaceclaim, gives me the edge, sorry.
Quote from: ARMCORTEX on April 30, 2016, 08:28:12 PM
And you Temporal, are a fraudster.
I remember you were willing to accept 3000$ from me for a device with was 1 meter square supposedly.
You will not find me defrauding people.
You are the last person that should speak.
Me I am the honorable ronin of overunity if anything, I have earned my bragging rights more than once.
I will repeat, Topsolid 7, Spaceclaim, microcontrollers, makes me the biggest maker that posted in this thread.
My superior skills in Topsolid 7, Spaceclaim, gives me the edge, sorry.
I can teach you how to transfer simple files if you like Tex ;)
Copy from one file,and pasting to another can be a tricky process ;D
Brad
CHALLENGE ONE
STOP FIGHTING
Lessen one, How to build a zero point resonator ! Here is the most important documentary you guys will ever watch https://youtu.be/dqLxonXFDoc
Note in the data two apples a float in space and over time they gently gravitate together and this act is resonance as the 2 objects are the same mass and size .
Note also the true conditions set for mater anti mater at the particle level ! Listen to how the two forms of mass are in a constant fluctuation with each other and except what is presented as true !
The secrets to gravity and its resonance is due to this function and confirms the reality of a balance between mater and anti mater and this fluctuation is how gravity works .
I f you can ever get pass the urge to fight insult and dance around like idiots than we can all develop in the here and now what was once a hidden truth but now I have give you a chance to be the next bunch of monkeys ever to discover the true secret of gravity .
Tinman please isolate self resonance as a one coil ! Try this one !
The above coil self resonates and its harmonic frequency is its centred hz number of the self resonate frequency ! Any coil arrangement of this kind will have its own self resonating frequency and the plan is to identify the correct formula that determines this self resonate frequency for all forms of coil construct !
This will test you to see if you know anything worth knowing about resonant free energy technology and also its time for some people to learn why we are here !
Attached is a frequency generator circuit that will become the first of many harmonic controllers to be use in a very special technology that can alter the harmonic state of mass and change the polarity of gravity by resonance !
Are you ready ?
Here is a wave
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
Here is the same wave as a stream of particles
...
Here is a straight line of force
______________________________________________________________________________________________________________________
To make this easy to understand above we see a EMF wave and it is interchanging between being a wave a particle and a line of force and you may wish to call it a magnetic line and that is ok but what else is this line of force ?
We know that space time is the fabric of all that is and if we want to exit or enter the universe we will need to either cross over a line of force or entre or exit through a door of some kind . This is also true for particles including anti mater !
The reality that anti mater exists is confirmed by the presence of back ground radiation but as I like to keep things simple I just want to except this as a fact and stick to why this line of force is important in the resonance field for gravity !
A wave is also a particle but it can become a line of force like a magnetic field line and this line can create a vacuum in space time at speeds above the speed of light because it has no mass ! When you open a door the mass of the door has been moved aside !
Look again at the wave and study what happens when it becomes a line and we see that all the peaks in the wave have flattened and if we recreate the wave again from the same line of force the space between the peaks is compressed !
All mass is in a fluctuation field of this kind from wave to particle to line of force ! And when two objects say two apples are close together in deep space they are attracted to each other by resonance and this forms the bond of gravity known as the weak force . SIMPLE !
Anti mater must exist or nothing would exist not even time ! So the wave the particle the line of force are a condition set up that permits anti matter to be in harmonic balance and this anti mater is fluctuating between dimensional positions on either side of the line ! This movement sets of the resonance creating all mass to be stable as a constant of energy !
If I open a door fast it creates a vacuum and any object on the inside of the door will want to move towards the the opening of the door ! This is gravity and its effect is a constant equal to the constant of the fluctuation of anti mater !
This is also a very powerful free energy constant ! And I will show you how to tap into it ! But understand resonance was set up at the very beginning of the creation of this dimension and its never going to stop until its resonance meets an equal amount of mass that is moving at speed towards our universe .
This is now confirmed ! ...............................................................FACT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SORRY .... But it will all end very soon ! So stop fighting learn and build share and give me all your money ahhahaah lol x
DR.WHO should call himself Mr.What. If you are sloppy in spelling and grammar, you are likely sloppy in other aspects of life as well, including but not limited to: relationships, your work/hobbies, dress, physics, hygiene.
Consider the following: work is the result of energy flow. Energy is neither gained nor lost while work is done, unless it is converted to/from mass {1st law of thermodynamics (LoT1)} Now also consider that LoT2 is not an absolute law in the sense that LoT1 is (it's a statistical law), and let your imagination go.
Quote from: ARMCORTEX on April 30, 2016, 08:28:12 PM
And you Temporal, are a fraudster.
Wrong!
Quote from: ARMCORTEX on April 30, 2016, 08:28:12 PM
I remember you were willing to accept 3000$ from me for a device with was 1 meter square supposedly.
Wrong again! You asked how much it cost to build and I answered you with a guess on what I spent. In fact you said you were dead broke and couldn't afford anything going on to talk some rather weird thoughts.
Quote from: ARMCORTEX on April 30, 2016, 08:28:12 PM
You will not find me defrauding people.
You are the last person that should speak.
Me I am the honorable ronin of overunity if anything, I have earned my bragging rights more than once.
I will repeat, Topsolid 7, Spaceclaim, microcontrollers, makes me the biggest maker that posted in this thread.
My superior skills in Topsolid 7, Spaceclaim, gives me the edge, sorry.
Like I wrote before, you need help. You believe your own lies.
Memory man get to grips with your reflection ! You make judgement of my appearance ? stop the little boy routine ! The level of precision I my work IF i LET YOU SEE IT ? is far to complex for your little head hahah
I like simple easy and a slow walk up to the complexity and tighten my rope when I fill a need for it but a bit of slack is often a good thing and you seem to be a loft with your ability to spell ? mmmmmm interesting this is about physics and quantum mechanics are you sure your able to cope with that ? Try a story telling web site or read harry potter .. hahahah
I am a master of the field as we say and a few quantum short of good eye sight but now and then I wear my specks hahaha ! No force is permitted to exist as a confined ideology created as error by them that had not considered the multi verse . If say I was to create a one way moment of thrust in one direction from a standing point why is it that you keep thinking that it will generate an equal amount of reverse thrust . ? The so called opposing force is simply defeated when two apples in deep space attract each other.
Let say that one apple would just vanish at given moments in time and this fluctuation is a constant that is invisible like anti mater ! So we have only one apple that we can see and its anti self is on the other side of the door . Its becomes obvious that force is there for one way directional as is gravity so its very simple to re create that effect with a box that is free to thrust in a one way direction with out an exhaust ..
HAHAHAHAH ITS IMPOSSIBLE TO BEAT ME SIR ! I AM THE BEST THERE IS ON THIS SIDE OF THE BLACK HOLE ! And I do mean the one that is inside of the sun ...
You have to now let go of all your claims that any and all release of energy creates an opposing reaction or force ! Energy that is gravity does not display that and there for the claim is DEBUNKED by me ...
Dont try and tune my coil son I will do that in good time ...... check mate hahah
Wow! Someone who can b.s. as well as ATOM/META.
author=memoryman link=topic=16550.msg482607#msg482607 date=1462066108]
QuoteDR.WHO should call himself Mr.What. If you are sloppy in spelling and grammar, you are likely sloppy in other aspects of life as well, including but not limited to: relationships, your work/hobbies, dress, physics, hygiene.
I dont agree with this.
My spelling and grammar is far from great,but im happily married-have been for 22 years. Im good at my job,and also my hobbies. I dress to suit the task at hand. Physics-well my outlook on that is,there are a lot of !!theories!! out there. And i shower twice daily-once to wake up,and once to wash off all the grease from a hard days work lol.
Brad
tinman, it is a general observation, true for most but not all. Although English is not my first language, I care for accuracy and meticulous communication in all I do.
Quote from: memoryman on April 30, 2016, 10:47:56 PM
Wow! Someone who can b.s. as well as ATOM/META.
It should be obvious to everyone by now, that "DR.WHO" is ATOM, back under a new moniker.
TK, no surprise there. He would do well to get professional medical help.
The urge to build is insane.
O yes... My overunity idea... Is coming to life.... Its alive... Its alive...
With Topsolid 7, I can play make believe monopoly of world economy and manufacturing. Hows this for bragging rights?
What can you do? What can you make that I cant?
https://www.youtube.com/watch?v=zofLzxcc5AE
TK, I believe you and I should partner up for greater entrepreneurship ideas that is offered on these forums.
I repeat my question. Why do you think knowing how to use a CAD-CAM program gives you any kind of bragging rights. And posting a video of someone else's CAD work does not make you an expert. I can also program your PLC and fix it for you when it quits working. SO WHAT! There are thousands of people in this world that can do the same thing.
Quote from: citfta on April 30, 2016, 05:53:03 PM
Is all this babble about G-codes and CAD-CAM supposed to impress someone? I can write my own G-code and repaired hundreds of machines that used G-code. I also know how to use several CAD-CAM programs. SO WHAT! Who cares. Those skills are just normal skills for someone that has worked in an industrial environment as an electronic tech. Having those skills does not make you someone special. I knew at least 200 hundred people with those same skills in just the one place I worked. Bragging about some skill you have only shows what a small mind you really have. You need to grow up and stop bragging like a 10 year old.
Carroll
This is MY CAD work, notice that I made the machine, I can make the most complex machines and program them.
Topsolid 7 gives me much more bragging rights than Mastercam programmers, never compare a Topsolid 7 programmer vs a Mastercam programmer.
HAHA, PLC is wack.
ARM-CORTEX 7 has error correction module inside the chip and can be considered PLC, for 15$.
Next thing, I make the PLC isolation, and save thousands.
You are cookie cutter customer, me I am maker.
In anticipation of PLC death, I saw that the STM32 CubeMX combined with Atollic truestudio and Cortex M7, would give easy access and debugging to
worlds most cost efficient automation hardware, again, I am steps ahead.
A legend in your own ....
Mind ?
You have shared your fantasy of a world with No people [your perfect factory ]
which you feverishly aspire to.
the whole world seems to be racing there right along with you ?
Robots delivering Pizza in OZ [Boston USA Next ]
https://www.washingtonpost.com/news/innovations/wp/2016/03/21/dominos-has-a-robot-delivering-pizzas-in-australia/
I suppose with your people skills and apparent absence of Morality ,it is probably a good idea for you to go Down this Path.
emphasis on going down !
Grab a line Bud ...we're all in this together !
Prepare for the future, follow the wave, ride the wave.
Topsolid 7, Spaceclaim, Atollic Truestudio.
Dont work, watch the robot to the work, grab a coffee and sit down for some TV.
Its good fun.
We must make America great again.
Because this is exactly what Trump is gonna say...
You see, he has no pity for poor people, he says that wages are already too high and companies gonna go bankrupt if you get pay-raise...
Its a republic, its about freedom, and a billionnaire has the freedom to keep a company in America, with 95% automated workforce.
Also you have the freedom to help as much possible as you can, wich your ressources, wich was allowed by freedom.
End result, everything is crazy automated.
Survival tactic is automation entrepreneurship via modern software, Topsolid 7, Spaceclaim, Microcontrollers.
This is the ''Maker Wave''...
try SolidWorks.
As to g-code programming: it generates compact code, if used properly; code generated by CAM software tends to be bloated.
Never used it, what can be better than Topsolid ?
Spaceclaim and/or Topsolid.
I will not tolerate hearing the words ''Solidworks'', its overpriced.
I know you probably pirate it...not a serious person in life if thats the case.
You cannot pirate, not when you reach $ level.
You can be swatted by lawyers, laws will be more severe soon.
"Never used it, what can be better than Topsolid ?" you won't know until you try it.
"I know you probably pirate it...not a serious person in life if thats the case." you don't KNOW anything; you're guessing.
I did not pirate it.
Thats good that you did not pirate it. Reading this makes me happy.
I almost feel like revealing my idea, but I wont, nope.
My slingshot pulse flywheel(s).
And another one also... I got another idea.
An amazing invention all in 3d, ready to be manufactured.
Please keep it to yourself: the world is not worthy of your ideas. That saves the sane people here from spending their valuable time on your sh*t.
I pirate everything.
(Not really)
Bill
Quote from: ARMCORTEX on May 01, 2016, 12:14:46 AM
The urge to build is insane.
O yes... My overunity idea... Is coming to life.... Its alive... Its alive...
With Topsolid 7, I can play make believe monopoly of world economy and manufacturing. Hows this for bragging rights?
What can you do? What can you make that I cant?
https://www.youtube.com/watch?v=zofLzxcc5AE (https://www.youtube.com/watch?v=zofLzxcc5AE)
TK, I believe you and I should partner up for greater entrepreneurship ideas that is offered on these forums.
"The urge to build is insane."
It is not. You are just lazy due to technology. You probably use navigation to get to the store everyday, because why bother using your own memory when tech can do it for you. You just want to 'sit' at the computer in the ice cold A/C and have a machine pump out the work. Well good luck with the funding for that. If your sooo good at it then get a 'good' job doing it? If you are sooo good at it, why dont you have a 'good' job doing it now? ??? ;)
You say we want to be like the real inventors. The real inventors actually worked to get their ideas accomplished. Even Tesla 'worked' on ideas before he had funding, and 'worked' on ideas after the funding was gone. ;) Work. Look it up. ;)
"O yes... My overunity idea... Is coming to life.... Its alive... Its alive..."
Lol. From the guy that says OU cant be had. ??? ::) ;)
"With Topsolid 7, I can play make believe monopoly of world economy and manufacturing. Hows this for bragging rights?"
Lol. You are really in fantasy land. If so then why are you not doing it right now instead of being here 'bragging' of accomplishments you havnt done or proven can be done???? Bragging? Say what you will. It sure looks bad from the readers position.
"What can you do? What can you make that I cant?"
I dont know. You have not shown anything at all, except foolish bragging of imaginary works you say you can do.
You are all big talk so far. ;) ;) All talk.
"TK, I believe you and I should partner up for greater entrepreneurship ideas that is offered on these forums."
lol and lol. Looking for someone to do work for you while you sit???? ;) Id be very surprised if he even replies to your bragging, sit on your butt balony. Id say if he does, it wont be a partnership agreement. :P ;D
Mags
At least he got the insane part right! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Quote from: citfta on May 01, 2016, 07:38:12 PM
At least he got the insane part right! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
lol. Yes. His urge to build is just not there. Just talk. Brag about stuff he could do, but hasnt yet. ;) It sounds like someone else on this forum, in quite a few ways. ??? ;)
Mags
Remember my theories and continue my work, I feel I am in danger.
Flywheel pulse slingshot in acceleration, think of the design, the meaning of the box, I now Know.
TS 7, Spaceclaim, Atollic TrueStudio.
Be awesome, be like me.
Quote from: ARMCORTEX on May 01, 2016, 10:34:47 PM
Remember my theories and continue my work, I feel I am in danger.
Flywheel pulse slingshot in acceleration, think of the design, the meaning of the box, I now Know.
TS 7, Spaceclaim, Atollic TrueStudio.
Be awesome, be like me.
Oh please ::)
The only danger you are in,is that that you create for your self.
Perhaps drowning in your own dribble will be the end of you ;D
Brad
ArmPit
quote
Flywheel pulse slingshot in acceleration, think of the design, the meaning of the box, I now Know.
end quote
You will have to give another fellow from OZ some credit on that satellite concept.
Archer Quinn
and Smokey 2 can back that up [he had it running until it broke].
Quote from: ramset on May 02, 2016, 11:12:16 AM
ArmPit
quote
Flywheel pulse slingshot in acceleration, think of the design, the meaning of the box, I now Know.
end quote
You will have to give another fellow from OZ some credit on that satellite concept.
Archer Quinn
and Smokey 2 can back that up [he had it running until it broke].
It is too bad "Armpit" did not understand what he took back in 2013 was "satellites" (drawn in 09). Today that satellite concept is lightyears behind what has been built since. His (armpits) butchered concept of "resonance" is a go to the self destruct scrap heap.
I dont go so low as to copy some design of you, wich did not work, according to memoryman.
I make my own design. I'll run a full analysis.
i did not see anything that was OU. What I did see was well-made.
Quote from: ARMCORTEX on May 02, 2016, 08:25:53 PM
I dont go so low as to copy some design of you, wich did not work, according to memoryman.
I make my own design. I'll run a full analysis.
You have yet to understand how low you have already admitted you are, as well as the depths to which your hubris originates from.
You go "write" ahead with your design, and what you think you understand and learn from it. See where it takes you.
You had no "good reason" to sneak to take my work - it was freely given in "words" here: http://www.backgauges.com/Gen-E-Sys%20II/paths.html
When/if you don't understand the message, there may be a very good reason WHY!
"Because you ain't seen nothin yet". - Gen-E-Sys II ..... generated Energy systems 2 as in ..... PLURAL!
Send it again and prepare it to me in good format.
Clean condensed, to the point.
Quote from: ARMCORTEX on May 02, 2016, 11:44:56 PM
Send it again and prepare it to me in good format.
Clean condensed, to the point.
You already made the point:
Quote from: ARMCORTEX on May 02, 2016, 08:25:53 PM
I dont go so low as to copy some design of you, wich did not work, according to memoryman.
I make my own design. I'll run a full analysis.
You do your own WORK with your own TIME and you may learn what you're missing, though it is very doubtful you have the WILL to do so since you expect someone else to do the WORK for YOU for and give it to YOU for FREE.
Get going you're wasting
TIME as you will learn, and
you just don't get it.
If you wanna help the people like you say you do then you have to put on the site, in clear format.
Its not about me, me I have an design nowm waiting for deals and opportunities with local machine shops to weld some material.