The Figuera/Buforn and Trilles electro-magnetic force amplifier will become intermittent devices,
accelerator with the function of energy source velocity amplifier.
Today known and used energy array(=battery) devices are mostly based by :
chemical cell and photoelectric cell couple, for Volta-ge or Ampére-ge changes,seriell or parallel
Now with elelctro-magnet cell arrays we can close the cycle and/or construct semi-in-/finite energy for work and power delivering machines.
The first important use : Pedelecs= range extender
Air conditioning(heat / cool)
and the optimizing from the "solar photoelectric energy conversion" and the conventional electric motor work principle to pulse surges force drive :
"virtual solar"=artificial light source ,in-house or cave installed .
DC delivered energy stay DC : no alternating inrush current losts and huge inverter need and high C-battery-values.
An "electric power on-demand" system,artificial light source - electro-magnet array energy based .
A comparison : 1 qm 10% efficiency solar cell and 1500 KWh variable light energy per sqm gives
annually in average 125 KWh power output.
Losses caused by heat,panel/sun angle :light reflection/bandgap absorbing quality et cet.
10% efficiency photoelectric( solar or artificial) with Wp/sqm 150 W gives up to :
150 W x 8766h= 1315 KWh per annum, 10-fold from average natural condition !
Or 10 x less photoelectric cell/modul/panel need.
2-dimensional flat light absorbing area to 3-dimensional cubic concept with mirror gives up to 8x times more energy output density !
80 sqm tect installation annual KWh gain ~ 1 cbm photoelectric conversion "cube" KWh gain per a.
Difference : the Wattpeak. Difference : all day electric power delivery
The commercial costs of each Wp-installation,modul price 1US$/Wp up to 5US$/Wp ready to use system costs will go down to 0,5 US$/Wp modul and +/- 0,625 US$ Wp ready to use =installed !
Up to 90% installed Wp price drop - in less than 2 years possible !
Margin game !
---------------------------------------------------------------------------------------------------------
Multiple electro-magnets array discs driver working like flywheels
like publicated by the german inventor Oskar Becker will become alternatives to on-/off-shore wind parcs and water dam plants !
-----------------------------------------------------------------------------------------------
The cheapest actual contractual MWh delivery : 35 US$
Making developments for the 10$/MWh "business as usual".
Your post is USELESS because it doesn't have any photos, no examples, no drawings,
no schematics, no web site, Nothing.
Can't you do a little better than that?
.
Fatbird..
LancaIV has given the links already in the Figuera thread but there is intense opposition there to discuss any thing other than the Figuera setup. So he has started the new thread. I have posted and followed LancaIV in te Figuera thread as well and the present post can be improved but calling it as useless is inaccurate.
Regards
Ramaswami
Lanca
Do you have a contact [phone or ?] for this inventor Henry Trilles [if he is still on the planet ??]?
============================
Lanca repost from Figuera thread
lancaIV
""
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #4101 on: September 03, 2016, 12:49:47 PM »
Quote
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=2&ND=3&adjacent=true&locale=en_EP&FT=D&date=19940318&CC=FR&NR=2695768A3&KC=A3
Here a google translation from the Henri Trilles amplifier description (the patent system own automatic translator works bad ) :
https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=FR&NR=2695768A3&KC=A3&FT=D&ND=3&date=19940318&DB=EPODOC&locale=en_EP
go to Drawings page 1 (9/11) from the original documents ( I calculate 16 couples ! ?)
there is also shown the pole direction from each e-magnet
Drawings page 2 (10/11) from the original document (I calculate 30 couples ! )
a simple 1-2 steps prototype (no need of full concept construction) is enough to approve the functionality
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Amplifier Circuit Electric (fixed)
This invention project concerns the possibility of amplifying a primary current (AC) lt origine provided by a small generator (6 volts 0.35 amps) with a series of seats transformers has one after the other linked together until has come to have an electromotive force (voltage and amperage) sufficient to supply the engine of a direct electric motor or via 1 or 2 batteries buffers without being constantly obligee going to charge its batteries.
This circuit is based on the ability of alternating currents to be amplified by transformers.
At present an electric car supplied with power by 8 batteries 12 volts or 96 volts and consumes 2 amperes per km has a range of 80 to 90 km and the weight of these batteries handicap enormously.
So I thought through to provide an electrical current constantly renewed and therefore inexhaustible.
The set consists of 30 coils (wound with nickel silver wire). This metal has 30 resistivity will amplify together voltages and amperages.
https://en.wikipedia.org/wiki/Nickel_silver
All 2 coils form a pair they will be nested on a soft iron bar (annealing) of sufficient length to not only electricity by influence can be felt in one at the other.
3 couples (6 coils) will form a series.
These pairs are connected together by a wire with a capacitor and each series is connected to the next (oriented in the opposite direction to the first by an also wire with capacitor) that will go to the induced coil (the 2nd) of the last pair of series to the field coil of l torque of the new series.
And so on couples, series, systems (2 sets) with the same windings corresponding coils and therefore the same currents will lead us to the end of the circuit with a maximum voltage and amperage.
These systems will number 5 so 10 sets of 6 coils.
1 coil
2 coils = 1 pair/couple
6 coils = 3 couples = 1 set/series
30 coils = 5 sets/series = 1 system x 2 = cw/ccw or positive/negative =AC
DESCRIPTION
All or part of 5 'system be used to power the motor or
to charge the buffer battery or to give the current refrigerator
which will be housed in all coils.
We interposerons just outside the 5 'system a rectifier
because the AC obtained at the end circuit should be changed W
DC power to charge the battery.
A small dynamo is connected to the battery it will be used to train
mechanically with pulleys and belts the little generator providing
the starting current of the circuit.
Each pair of lead wire or serial number or system will have
a capacitor to allow current instead of being behind
the tension of being ahead and at least compensate for this delay. We inter
calerons also at the end of the circuit a rheostat for metering the quantities
current required for each new item.
Note: The dimensions of the refrigerator (or freezer) used
will depend on the dimensions of coils.
OPERATION
Introduction
It was observed long ago that when inserting a magnet in a wound coil of copper wire (or other electrically conductive metal) is produced in the coil an electric current. And that when removing the magnet it is born in the coil of another current direction opposite to the previous. And if the fast is introduced and is removed from said coil magnet over this movement to introduce and remove are numerous and faster and the current increases rapidly.
We get the same result in even faster by using an electromagnet instead of the magnet and by sending alternating current.
The current changes direction many times (50 or more) per second will represent more rapid introduction and removal of the magnet and increase the power over it.
= 50Hz (as example)
A coil induced by the electromagnet will have a power all the more powerful it will be yarn length subjected to the magnetic flux.
All the proposed circuit is based the above.
Operation
As we explained in the description and drawing the circuit is composed of 2 pairs of coils (wound with nickel wire resistivity 30) which will enable us better than copper of lower resistivity barely 1.56 to advance pair of voltages and amperage (all couples are numbered).
The primary current is supplied by a small generator (used at present to provide lighting to barely 6 volts bicycles and Oa, 35 an electromotive force of 2 watts, 15.
http://www.ebay.com/bhp/bicycle-light-generator
http://www.ebay.com/itm/6v-3w-Bicycle-bike-Dynamo-Generator-Charge-Charging-for-Cellphone-GPS-w-Bracket-/130944233480
Our first task will be to increase the amperage (more powerful therefore the greatest electromotive force) torque n "1
We therefore bear the winding 10 of the coil (inductor) to 9 m on a nickel wire of 2 mm diameter is 6 this thread cross-sectional area of 5 mm2 30.
The resistance will be obtained 0.49 (related to the fact that over 15 m long nickel silver 2 mm in diameter so 3 14 mm2 section has a resistance of 1 ohm, 4).
The voltage is 6 volts we will get the amperage divided by 0.49 6 which will be 14 amperes (6 x 14 = 84 Watts) instead of 2.15 watts to the origin.
This coil turning soft iron bar electromagnet it will be much more powerful and provide the 2 "coil induced a stronger induction.
This new amperage (14a) was able to circulate in the winding wire of the coil induced thanks to the its thread section which is 5 mm 3 and allows to pass 14 amps widely (3 amps maximum can circulate per mm2 wire section).
The second coil on the same bar of soft iron (induced coil) will have a winding 6 m instead of 9 which will decrease the voltage and bring to 4 volts the wire section is also reduced from 5 mm 3 to 4 mm 52 we will have a 38 ohm resistor O by dividing the voltage by the resistance, a rating of 12 amps.
It is this current of 4 volts with 12 amps to be forwarded to the first coil (inductor) 20 following couple who will have the dual winding of the previous coil is 12 meters by 6 so a voltage that will be door 8 volts resistance of 0.66 so a rating of 8: 12a = 0.66 that will excite the electromagnet of the new couple.
The induced coil of this new couple with a winding 15 mm for 6.15 of a section of O ohm resistor 71 carry the new DC 10 volts 0.71 = 14 amperes by the wire connecting them will excite electro magnet flowing in the field coil 30 of the last couples of the series and we will finish the series with a current raised to 14 volts and 16 a.
Everything is explained in the attached table.
The current obtained at the end of this series will be transmitted to the next series inverted relative thereto ie the current will go in the opposite direction and the two coils (the latter induced) of the leer and the series ( first induction) in the following series will be placed as close (to avoid any length of wire off the windings).
And thus torque couple of series in series systems systems (a system 2 series 1 series 3 couples, 1 couple 2 coils) in all 5 systems we get to the end of the circuit to the last induced coil there a catch thread fairly large section reccueillera the resulting current.
The lengths of wire, section resistances, voltages, amperages couples will be exactly the same for all five similar systems 10 system.
At the end of each system as at the end of each series last coil induced transmit its power to the first induction coil in the following series reversed from the previous (so that we will no longer need alternator) which therefore used only for the 10 pair of the whole.
At the end of each system a current of 6 volts and 1 ampere maximum will be charged to fuel 1 "field coil of the next system. So at the end of the first 4 systems we have 28 volts 6 volts for the next system will 22 volts and 28 amps to the last system in total 22 x 4 = 88 + 22 = 116 volts and 23 amps 5 times = 115 amps.
At the end of the 50 system we will have 116 volts and 115 amps.
A rheostat allow us to control the amount of current to each of the elements that follow.
A rectifier connected between the end of the circuit and the battery for example, we will transform the alternating current into direct current to charge the battery or batteries to 6 amps hour.
This or these batteries will feed the refrigerator (400 watts 12 wolts one kilowatt per 24 hours) and will turn the dynamo using pulleys and belts will cause the alternator mechanically.
If 96 volts are required to walk from the car engine, we will remain 20 volts for these functions and a lot of amps.
End Snip
-----------------------------
respectfully
Chet K
Quote from: FatBird on September 03, 2016, 08:39:01 PM
Your post is USELESS because it doesn't have any photos, no examples, no drawings,
no schematics, no web site, Nothing.
Can't you do a little better than that?
.
Are you in hurry,fatbird,or why do you behave in Julius Gaius manner "veni,vidi,vici" and risc a fail ?
As "Infinite" we can call the "working re-/charge process" but we have to define the material work-hour to make KW/ and KWh/ price/-s
comparision possible.
There are several system (known,publicated) options,which from these will become sustainable ?
Using the conventional energy converter ( many decades trial/error and success results included) and optimizing the energy conversion efficiency by new methods !
ramset,Chet,
inside the Trilles espacenet documents you see above the FR-Register link,
which let you enter to the french patent office register and there are three Trilles publications to find - all without his or patent lawyer address !
The patent office can only give to us his last -1998-(last correspondence) address ,we will not know if he is alive or living in the same homestead !
But technically the working process in his papers is well exposed and documented !
It's almsot the same as Perrigo did in 1918 :-)
http://rexresearch.com/perrigo/perrig.htm
Many of us have studied the total (ever growing) rexresearch archive ;)
About power density,not an actual concern,of using the nuclear forces from elementar magnetism :
https://worldwide.espacenet.com/publicationDetails/description?CC=WO&NR=8808220A1&KC=A1&FT=D&ND=3&date=19881020&DB=EPODOC&locale=en_EP (https://worldwide.espacenet.com/publicationDetails/description?CC=WO&NR=8808220A1&KC=A1&FT=D&ND=3&date=19881020&DB=EPODOC&locale=en_EP)
To clarify the operation of this embodiment according to the invention, the following dimensioning of the transformer windings is given using Figure 17 as an example, the iron cores being dimensioned in accordance with the manner usual for transformers:
- winding 81: 1000 windings, 220 V/50 Hz, 5 A at full load;
- winding 82: 1 winding, 5000 A;
- winding 84: 1000 windings, 5000 A;
- winding 85: 1100 windings, 4500 A, 220 V/50 Hz.
From the above example it is evident that, with a coil 82 having 5000 ampere windings, a flux variation of 5000000 ampere windings can be generated with the superconducting coil 84. Accordingly, a generated power of 990 kW can be drawn from the terminals 89 for a power supplied to the connecting terminals 88 of 1 . 1 kW, and this corresponds to a power gain of approximately a factor of 1000. In the variant indicated in Figure 18 of this fourth embodiment, a two-phase system has been assumed. In a further variant of this embodiment, the latter can also be constructed according to a three-phase system. In the above described variant, a mains frequency of 50 Hz has also been assumed. These embodiments may, however, also be used for other frequencies. [/size]
5000000 "ampere windings"(~rotations/revolution) = 1000 turns winding coil x 5000 A
990 KW : 1/1000 of this value 0,99 KW as target for the home heating system
600 Watt for an averagde sized (US and elsewhere) home
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=20130110&CC=US&NR=2013011125A1&KC=A1 (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=20130110&CC=US&NR=2013011125A1&KC=A1)
The "Rolling Lumens Heater" consists of an 8″×8″×4″ electrical junction box with six lampholders mounted on the exterior of the box. A 100 watt light bulb is placed in each of the lampholders. A 120 volt ac line supplies voltage to the interior of the junction box where each of the lampholders is connected in parallel to the line. The junction box is installed in the cold air return of a forced air furnace or in an enclosure through which hot water pipes travel in a hot water heating system. When the lamps are illuminated, the air driven by an 8 inch fan through the cold air return, or enclosure, is heated to a temperature of 70 degrees Fahrenheit. The heated air is then pushed through the heating system to the registers and out into the rooms where the temperature remains constant at 70 degrees. The cost of operating this system is approximately $30.00 per month for an average size home. No petroleum or fossil fuels are burned in this process with no resultant environmental pollution and inherent health hazards.
Bringing down the autonomous (foldable ? portable ?) house construction market prices,
included energy system and white/grey/no more black water cycle
250 US$/sqm or 25 US$/sqft
http://www.fabprefab.com/fabfiles/otherfabhome.htm (http://www.fabprefab.com/fabfiles/otherfabhome.htm) Ramon Kalinowski 15000 US$ FPB
(exposed in
https://books.google.pt/books?id=Zs8DAAAAMBAJ&pg=PA20&lpg=PA20&dq=popular+mechanics+foldable+portable+building&source=bl&ots=IIDzWC28-P&sig=S7dhC-dM5D350e2NZ_SUEK_IG-I&hl=de&sa=X&ved=0ahUKEwik-5ak2fXOAhUDVhQKHbijDqkQ6AEIIjAA#v=onepage&q=popular%20mechanics%20foldable%20portable%20building&f=false (https://books.google.pt/books?id=Zs8DAAAAMBAJ&pg=PA20&lpg=PA20&dq=popular+mechanics+foldable+portable+building&source=bl&ots=IIDzWC28-P&sig=S7dhC-dM5D350e2NZ_SUEK_IG-I&hl=de&sa=X&ved=0ahUKEwik-5ak2fXOAhUDVhQKHbijDqkQ6AEIIjAA#v=onepage&q=popular%20mechanics%20foldable%20portable%20building&f=false) )
and this aluminium A-frame house http://www.powerprofile.co.za (http://www.powerprofile.co.za) 10000 US$/64 sqm as idea prototype
and the morphing (space and volume gain ) concept https://www.youtube.com/watch?v=f-iFJ3ncIDo (https://www.youtube.com/watch?v=f-iFJ3ncIDo)
Federation of American Scientists : 32-38 sqm Starter Family House
72-78 sqm Expanded Family House
relocateable society movement
Lanca
I really like your new thread,
thx
Chet K
How can we look at some drawings, pictures, or schematics?
Thanks.
FatBird,
on the left side from the epo.org/espacenet page you see the different documents in e-paper format
or as "original document" e-copy.
Enter (in the original page) and look for the wished information:
Bibliographic Data
Description
Claims
Mosaics/Images
Original document
................
...............
I did that, but I don't see how that is relevant to what's being discussed here.
Hmmmmmmm.
.
Clearly,it is ! And makes part from a global program !
https://translate.google.de/translate?sl=de&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=https%3A%2F%2Fde.wikipedia.org%2Fwiki%2F2000-Watt-Gesellschaft&edit-text= (https://translate.google.de/translate?sl=de&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=https%3A%2F%2Fde.wikipedia.org%2Fwiki%2F2000-Watt-Gesellschaft&edit-text=)
At first : definition of the average sustainable -per capita- consume !
Future Order: Rationalism ;) over-consume limiting
defining priority : Wattpeak limit
Seconds : the energy/power/natural source !
renewable fuel sources(gas,liquid,solid)
DC,pulsed DC,AC electricity;Volt-grid ?
society consume standart ( per capita eco-budget)
How many sqm/cbm living area per capita ?
Average ambiental in-house temperature ?
How many litre water consume ?
How many KWh-energy consume per capita per day ?
Kitchen-/bath appliances energy consume reduction !
TARGET : optimizing the energy Wp and KWh consume to such a level,that only more a 1KW-FE-
generator will be the autonomous household power source !
------------------------------------------------------------------------------------------------------
repeat:
Federation of American Scientists :
http://fas.org/programs/energy/btech/advanced%20technologies/Affordable,%20Safe%20Housing%20based%20on%20EPS.pdf
32-38 sqm Starter Family House 72-78 sqm Expanded Family House
~ less than 60 sqm morphing foldable portable building
http://rexresearch.com/cuinanoagwire/cuinanoag.html (http://rexresearch.com/cuinanoagwire/cuinanoag.html)
Super-insulated clothing could eliminate need for indoor heating
------------------------------------------------------------------------------------------------------
From the above view I would have to agree, "eliminate need for indoor heating" system
So no more 600 W per household,but 12 Wattp per capita body heating energy will be the standart !
Fat is ugly,fat=oversized consume,too !
Low consume society ! No credit ! Cash or barter finance system !
automobile industry change :
In Europe the max.traffic velocity in the cities will become 30 Km/h= 1 KW electric motor sufficient
or bicycle pedalling
The FE-generator dimension ?
Kitchen/bath appliances consume ? Living area heating/cooling ?
f.e.: http://www.micromedia.li/microhouse/index.php (http://www.micromedia.li/microhouse/index.php) = moveable pantry-kitchen
http://www.geolitesystems.com/conv.html (http://www.geolitesystems.com/conv.html) : housemaker http://www.geolitesystems.com/flpln.html (http://www.geolitesystems.com/flpln.html)
Duche : http://www.inpama.com/index.php?content=invention&id=816 (http://www.inpama.com/index.php?content=invention&id=816) water and energy saving
365 days water collection,electricity-free : solar condensation and fog/rain collector
and (no /low e) recycling: http://www.aqsolutions.org (http://www.aqsolutions.org)
black water : compostingtoilett like in this modern cabin used
http://www.treehugger.com/modular-design/habitaflex-folding-homes.html#14730694289391&action=collapse_widget&id=0&data= (http://www.treehugger.com/modular-design/habitaflex-folding-homes.html#14730694289391&action=collapse_widget&id=0&data=)
Electric appliances consume list :
https://translate.google.de/translate?sl=de&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=http%3A%2F%2Fwww.oeko-energie.de%2Fprodukte%2Fsolarstrom-photovoltaik%2Fsparsame-dc-verbraucher%2Findex.php&edit-text= (https://translate.google.de/translate?sl=de&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=http%3A%2F%2Fwww.oeko-energie.de%2Fprodukte%2Fsolarstrom-photovoltaik%2Fsparsame-dc-verbraucher%2Findex.php&edit-text=)
with better efficiency motors and heat elements 1500 Wh/ 24h
included syn-gas-owen(toaster,hot water kettel)
refrigerator:
http://mtbest.net/freezer-to-fridge-thermostat.html (http://mtbest.net/freezer-to-fridge-thermostat.html) 100 Wh/24h
Light:
http://www.osmatech.net/led.html (http://www.osmatech.net/led.html) 100Wh/24h
Making the 200 Watt compact generator sufficient for the urban eco-household !
With storage battery=puffer.(=conventional ,approved technology : 5000 cycles charger )
( urban citizen households can begin to reduce their consume to this 200 W per hour on-grid delivery maximum)
200 Watt x 12 h x 0,80(battery input and output conversion losts) x 0,85(charger losts):
DC output/DC consumer (or AC inverter x 0,85) : 250 Ah battery-set
+ 200 Watt x 12 h direct energy conversion to consumer (heat,cool,movement,light)
You have fat livingpartners ,a healthy solution,"social movement" :
https://www.google.pt/search?q=bicycle+generator&client=opera&hs=dYY&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjQsb2o_vfOAhVFOMAKHf3-AXQQsAQIIw&biw=1366&bih=668 (https://www.google.pt/search?q=bicycle+generator&client=opera&hs=dYY&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjQsb2o_vfOAhVFOMAKHf3-AXQQsAQIIw&biw=1366&bih=668)
but let them do this outdoor
---------------------------------------------------------------------------------------------------------
a commercial mobile chalet with up to1 week autonomous living range :
http://www.mobilchalet.de (http://www.mobilchalet.de)
Infrastructural independence
All required energies, light and warmth are won from sun radiation. With the roof area sufficient drinking water can be won. Efficient house technology safe to operate makes drinking water, hot-water, heating and electricity in a sufficient quantity available for convenient use. A hot-water solar collector as well as a Photovoltaik collector are core of the plant for the electricity generation. For electricity storage a heat accumulator and a greater accumulator capacity is installed. Several days can therefore be bridged without solar radiation.
------------------------------------------
An alternative to this " (natural electromagnetic) sun radiation" will become the solution for
autonomous grid-independant living.
And/or "electro-magnetic radiation" will become part of the energy conversion system:
http://solarwindow.com/technology/
http://www.greenoptimistic.com/green-ferrite-solar-cell-japan-20110920/#.V8253lpX9aY
There is not the need to re-invent the wheel, only a well sized electric generator
and developing from the fundamentals : https://www.jovoto.com/projects/300house/ideas/12735 (https://www.jovoto.com/projects/300house/ideas/12735)
A house must provide shelter from the elements and physical harms
Yes !
versus:
https://www.google.pt/search?q=chu+200&client=opera&hs=Qhv&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjK2oziofjOAhXKLsAKHbkRDI0QsAQIIw&biw=1366&bih=668 (https://www.google.pt/search?q=chu+200&client=opera&hs=Qhv&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjK2oziofjOAhXKLsAKHbkRDI0QsAQIIw&biw=1366&bih=668)
Good idea,bad price result !
Re-engineering simple life !
http://www.n55.dk/MANUALS/Manuals.html (http://www.n55.dk/MANUALS/Manuals.html)
The searched FE-generator dimension : between 200W up to 1000W(=less battery capacity need) output permanent
C.O.P. ?
static = electro-magnetic DC force amplifying/au(g)menting process by revolving the electro-magnetic lines
(and getting the fire-stone against fire-stone=pyrit effect: pyro/flash/burst/signal/pulse/ignition)
Figuera/Buforn static electro-magnetic power amplifier (generator) original and modificated
https://books.google.pt/books?id=KhUWDAAAQBAJ&pg=PA23&lpg=PA23&dq=figuera+buforn&source=bl&ots=rGYZDkMLRm&sig=WoKiQRSC1IevC84s9GZ1WUxt6pU&hl=de&sa=X&ved=0ahUKEwjD4ITipPjOAhWbF8AKHcXjBP0Q6AEITDAF#v=onepage&q=figuera%20buforn&f=false (https://books.google.pt/books?id=KhUWDAAAQBAJ&pg=PA23&lpg=PA23&dq=figuera+buforn&source=bl&ots=rGYZDkMLRm&sig=WoKiQRSC1IevC84s9GZ1WUxt6pU&hl=de&sa=X&ved=0ahUKEwjD4ITipPjOAhWbF8AKHcXjBP0Q6AEITDAF#v=onepage&q=figuera%20buforn&f=false)
Henri Trilles static power amplifier
https://worldwide.espacenet.com/publicationDetails/mosaics?CC=FR&NR=2695768A3&KC=A3&FT=D&ND=3&date=19940318&DB=EPODOC&locale=en_EP (https://worldwide.espacenet.com/publicationDetails/mosaics?CC=FR&NR=2695768A3&KC=A3&FT=D&ND=3&date=19940318&DB=EPODOC&locale=en_EP)
Rafael Martinez Gutierrez static power amplifier (generator)
https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=ES&NR=395792A1&KC=A1&FT=D&ND=3&date=19721116&DB=EPODOC&locale=en_EP (https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=ES&NR=395792A1&KC=A1&FT=D&ND=3&date=19721116&DB=EPODOC&locale=en_EP)
Keiichiro Asaoka static dynamo
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=21&ND=3&adjacent=true&locale=en_EP&FT=D&date=19990720&CC=US&NR=5926083A&KC=A (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=21&ND=3&adjacent=true&locale=en_EP&FT=D&date=19990720&CC=US&NR=5926083A&KC=A)
and
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=30&ND=3&adjacent=true&locale=en_EP&FT=D&date=20030110&CC=JP&NR=2003009558A&KC=A (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=30&ND=3&adjacent=true&locale=en_EP&FT=D&date=20030110&CC=JP&NR=2003009558A&KC=A)
Paul Lucien Galey static electrical power generator
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=8&ND=3&adjacent=true&locale=en_EP&FT=D&date=19761217&CC=FR&NR=2312135A1&KC=A1 (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=8&ND=3&adjacent=true&locale=en_EP&FT=D&date=19761217&CC=FR&NR=2312135A1&KC=A1)
Which input electricity kind ? Which amplifier/generator output kind ,Voltage Amperage Frequency ?
Consumer : DC ? AC (HV ?)? Pure sinewave (50/60/ HF ?) ? Converter/Inverter needs ? Rectifier ?
The input energy battery source and consumer energy buffer :
250 Ah x 12 V + charger + inverter + recharge process to DC rectifier
static magnetic amplifier : C.O.P. ?
C.O.P.: Wout/Win
using amorph metal parts
page 12 from original document
https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=WO&NR=2015090266A2&KC=A2&FT=D&ND=3&date=20150625&DB=EPODOC&locale=en_EP (https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=WO&NR=2015090266A2&KC=A2&FT=D&ND=3&date=20150625&DB=EPODOC&locale=en_EP)
Wout Win
280 7,62
535 14,97
850 24,13
1240 35,82 [ values explained in (0028) and (0029)]
-----------------------------------------------------------------------------------------------------------
C.O.P. Henri Trilles power amplifier
Wout Win
1 x system
first transformer stage
84 2,15 ~ average Imris generator C.O.P.
second transformer stage
224 84( output first stage)
third transformer stage
634 224 (output second stage)
https://books.google.pt/books?id=KhUWDAAAQBAJ&pg=PA23&lpg=PA23&dq=figuera+buforn&source=bl&ots=rGYZDkMLRm&sig=WoKiQRSC1IevC84s9GZ1WUxt6pU&hl=de&sa=X&ved=0ahUKEwjD4ITipPjOAhWbF8AKHcXjBP0Q6AEITDAF#v=onepage&q=figuera%20buforn&f=false (https://books.google.pt/books?id=KhUWDAAAQBAJ&pg=PA23&lpg=PA23&dq=figuera+buforn&source=bl&ots=rGYZDkMLRm&sig=WoKiQRSC1IevC84s9GZ1WUxt6pU&hl=de&sa=X&ved=0ahUKEwjD4ITipPjOAhWbF8AKHcXjBP0Q6AEITDAF#v=onepage&q=figuera%20buforn&f=false)
from the original Figuera/Buforn drawings
to toroidal transformer modification
https://www.youtube.com/watch?v=3QguCN8TP7o (https://www.youtube.com/watch?v=3QguCN8TP7o)
the #14 list with the descriptions gives us mathematical formulas and physical reasons about the system working principle.
https://worldwide.espacenet.com/publicationDetails/description?CC=FR&NR=2312135A1&KC=A1&FT=D&ND=3&date=19761217&DB=EPODOC&locale=en_EP (https://worldwide.espacenet.com/publicationDetails/description?CC=FR&NR=2312135A1&KC=A1&FT=D&ND=3&date=19761217&DB=EPODOC&locale=en_EP)
google description translated:
https://translate.google.de/translate?sl=fr&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=https%3A%2F%2Fworldwide.espacenet.com%2FpublicationDetails%2Fdescription%3FCC%3DFR%26NR%3D2312135A1%26KC%3DA1%26FT%3DD%26ND%3D3%26date%3D19761217%26DB%3DEPODOC%26locale%3Den_EP&edit-text= (https://translate.google.de/translate?sl=fr&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=https%3A%2F%2Fworldwide.espacenet.com%2FpublicationDetails%2Fdescription%3FCC%3DFR%26NR%3D2312135A1%26KC%3DA1%26FT%3DD%26ND%3D3%26date%3D19761217%26DB%3DEPODOC%26locale%3Den_EP&edit-text=)
One of the Figuera important arguments for motionless generator work : the magnetic field force and the attraction poles distance.
https://www.google.com/patents/US4345174 (https://www.google.com/patents/US4345174)
It is first to be noted that the pull of an electromagnet varies as a function of the area of the holding surface muliplied by the square of the flux density divided by a constant. Also, that the flux density increases as the distance to the holding surface decreases. Hence, changes in the flux density is the greatest contributor to the pulling force of an electromagnet. Experiments conducted by the inventor have shown that an electromagnet powered by two "D" cell batteries can produce a holding force of 500 pounds and that the magnetic attraction force varies with the distance between the surface of the electromagnet and the item to be lifted. It was found, that at a distance of one-eighth of an inch, the force is approximately 7.8 pounds; at a distance of approximately one-twelfth of an inch the force is 31 pounds; at a distance of approximately one/twenty-fourth of an inch the force is 125 pounds; and, as stated, at contact, the force is 500 pounds. Thus, a usable force begins when the distance is one-eighth of an inch and increases rapidly thereafter.
1. Juni 1981 : 2x "D"-cell https://en.wikipedia.org/wiki/D_battery (https://en.wikipedia.org/wiki/D_battery)
ea. nominal voltage 1,5V 8000 mAh
higher voltage,pulsed power !
permanet magnet as battery and Tesla quoting:
"One watt-second of power is not much. As normally thought of, it is just one watt delivered over a period of one second. Oh what a vast difference however, can be the manifestation of one billion watts delivered for one billionth of a second."
1 signal per sec ,2 signals per sec= 1 Hz to 1000Hz/1 KHz to 1000000Hz/1 MHz to
1000000000Hz/1GHZ ( .... THz/ PHz)
50Hz ~ 3000 RPM
accumulated charge( flywheel/capacitor) to 1 stroke/strike
https://en.wikipedia.org/wiki/Electromagnetic_pulse (https://en.wikipedia.org/wiki/Electromagnetic_pulse)
https://en.wikipedia.org/wiki/Jerk_(physics (https://en.wikipedia.org/wiki/Jerk_(physics))
http://overunity.com/13619/longitudinal-magneto-dielectric-waves-vs-electromagnetic-waves/#.V87jsFpX9aY
and recitating from Galey power amplifier description:
Pour chaque dispositif d'une puissance de 2 kW en courant alternatif 220 volts,50 hertz par exemple,utilisant des aimants ferrites courants,il faudrait environ 75 grammes d'aimant.
google translator:
for each of a 2 kW AC 220 volt, 50 Hz for example, using magnets ferrites currents (courants~gelaeufig~conventional,not currents)would require about 75 grams of magnet.
= C5/C8 Ferrit(e) magnets http://www.ferrite-info.com/ferrite_grades.aspx (http://www.ferrite-info.com/ferrite_grades.aspx)
75 grams~ 2,5 ounces
1.95 Ounces Your Price: $0.35 http://www.magnet4sale.com/ceramic-magnets-c8-1-7-8x7-8x3-8-hard-ferrite-magnets/ (http://www.magnet4sale.com/ceramic-magnets-c8-1-7-8x7-8x3-8-hard-ferrite-magnets/)
Figuera/Buforn: 1902-1914
Tesla : 1892 http://www.pbs.org/tesla/res/res_art05.html (http://www.pbs.org/tesla/res/res_art05.html)
Usually in operating an induction foil we have set up a vibration of moderate frequency in the primary, either by means of an interrupter or break, or by the use of an alternator. Earlier English investigators, to mention only Spottiswoode and J. E. H. Gordon, have used a rapid break in connection with the coil. Our knowledge and experience of to-day enables us to see clearly why these coils under the conditions of the tests did not disclose any remarkable phenomena, and why able experimenters failed to perceive many of the curious effects which have since been observed.
In the experiments such as performed this evening, we operate the coil either from a specially constructed alternator capable of giving many thousands of reversals of current per second, or, by disruptively discharging a condenser through the primary, we set up a vibration in the secondary circuit of a frequency of many hundred thousand or millions per second, if we so desire; and in using either of these means we enter a field as yet unexplored.
It is impossible to pursue an investigation in any novel line without finally making some interesting observation or learning some useful fact. That this statement is applicable to the subject of this lecture the many curious and unexpected phenomena which we observe afford a convincing proof. By way of illustration, take for instance the most obvious phenomena, those of the discharge of the induction coil.
A most curious feature of alternate currents of high frequencies and potentials is that they enable us to perform many experiments by the use of one wire only. In many respects this feature is of great interest.[/size]
In a type of alternate current motor invented by me some years ago I produced rotation by inducing, by means of a single alternating current passed through a motor circuit, in the mass or other circuits of the motor, secondary currents, which, jointly with the primary or inducing current, created n moving field of force. A simple but crude form of such a motor is obtained by winding upon an iron core a primary, and close to it a secondary coil, joining the ends of the latter and placing a freely movable metal disc within the influence of the field produced by both. The iron core is employed for obvious reasons, but it is not essential to the operation. To improve the motor, the iron core is made to encircle the armature. Again to improve, the secondary coil is made to overlap partly the primary, so that it cannot free itself from a strong inductive action of thc latter, repel its lines as it may. Once more to improve, the proper difference of phase is obtained between the primary and secondary currents by a condenser, self-induction, resistance or equivalent windings.[/size]
I had discovered, however, that rotation is produced by means of a single coil and cote; my explanation of the phenomenon, and leading thought in trying the experiment, being that there must be a true time lag in the magnetization of the core. I remember the pleasure I had when, in the writings of Professor Ayrton, which came later to my hand, I found the idea of the time lag advocated. Whether there is a true time lag, whether the retardation is due to eddy currents circulating in minute paths, must remain an open question, but the fact is that a coil wound upon an iron core and traversed by an alternating current creates a moving field of force, capable of setting an armature: in rotation- It is of some interest, in conjunction with the historical Arago experiment, to mention that in lag or phase motors I have produced rotation in the opposite direction to the moving field, which means that in that experiment the magnet may not rotate, or may even rotate in the opposite direction to the moving disc. Here, then, is a motor (diagrammatically illustrated in Fig. 17), comprising a coil and iron core, and a freely movable copper disc in proximity to the latter.
and so on
going timely to 1902/1914 Figuera/Buforn and the publicated "20 hp electric motor" power range electric motor efficiency 1902 ?
https://en.wikipedia.org/wiki/Baker_Motor_Vehicle (https://en.wikipedia.org/wiki/Baker_Motor_Vehicle) 1,75 hp 1,3 KW
http://www.twinkletoesengineering.info/wells_auto_museum/baker_electric_technology.htm#Does (http://www.twinkletoesengineering.info/wells_auto_museum/baker_electric_technology.htm#Does) 300% overload rating mean the Baker motor can output 10.5 hp?
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
magnetic power amplifier
+
Pulse generator ( Frequency/Amplitude/Duration=duty cycle)
http://gsjournal.net/Science-Journals/Communications-Mechanics%20/%20Electrodynamics/Download/1180 (http://gsjournal.net/Science-Journals/Communications-Mechanics%20/%20Electrodynamics/Download/1180)
+
http://maddsci.tripod.com/george/ (http://maddsci.tripod.com/george/)
In 1890, Tesla discovered that if he placed a two-foot long single-turn deep copper helix coil near his magnetic disrupter, the thin-walled coil developed a sheath of white sparks with long silvery white streamers rising from the top of the coil. These discharges appeared to have much higher voltages than the generating circuit. This effect was greatly increased if the coil was placed inside the disrupter wire circle. The discharge seemed to hug the surface of the coil with a strange affinity, and rode up its surface to the open end. The shockwave flowed over the coil at right angles to the windings and produced very long discharges from the top of the coil. With the disrupter charge jumping one inch in its magnetic housing, the coil streamers were more than two feet in length. This effect was generated at the moment when the magnetic field quenched the spark and it was wholly unknown at that time.
This train of very short uni-directional pulses causes a very strange field to expand outwards. This field resembles a stuttering electrostatic field but has a far more powerful effect than would be expected from an electrostatic charge. Tesla was unable to account for the enormous voltage multiplication of his apparatus using any of the electrical formula of his day. He therefore presumed that the effect was entirely due to radiant transformation rules which would have to be determined through experimental measurements. This he proceeded to do.
Tesla had discovered a new induction law where radiant shockwaves actually auto-intensified when encountering segmented objects. The segmentation was the key to releasing the action. Radiant shockwaves encountered a helix and "flashed over" the outer skin, from end to end. This shockwave did not pass through the windings of the coil but treated the surface of the coil as a transmission path. Measurements showed that the voltage increase along the surface of the coil was exactly proportional to the length travelled along the coil, with the voltage increase reaching values of 10,000 volts per inch of coil. The 10,000 volts which he was feeding to his 24 inch coil were being magnified to 240,000 volts at the end of his coil. This was unheard of for simple equipment like that. Tesla also discovered that the voltage increase was mathematically linked to the resistance of the coil winding, with higher resistance windings producing higher voltages.
Tesla then began to refer to his disrupter loop as his special "primary" and to the long helical coil as his special "secondary" but he never intended anyone to equate these terms to those referring to electromagnetic transformers which operate in a completely different way.
There was an attribute which baffled Tesla for a time. His measurements showed that there was no current flowing in the long copper "secondary" coil. Voltage was rising with every inch of the coil, but there was no current flow in the coil itself. Tesla started to refer to his measured results as his "electrostatic induction laws". He found that each coil had its own optimum pulse duration and that the circuit driving it needed to be "tuned" to the coil by adjusting the length of the pulses to give the best performance.
Tesla then noticed that the results given by his experiments paralleled the equations for dynamic gas movements, so he began wondering if the white flame discharges might not be a gaseous manifestation of electrostatic force. He found that when a metal point was connected to the upper terminal of the "secondary" coil, the streamers were directed very much like water flowing through a pipe. When the stream was directed at distant metal plates, it produced electronic charges which could be measured as current at the receiving site but in transit, no current existed. The current only appeared when the stream was intercepted. Eric Dollard has stated that this intercepted current can reach several hundred or even thousands of amps.
Tesla made another remarkable discovery. He connected a very heavy U-shaped copper bar directly across the primary of his disrupter, forming a dead short-circuit. He then connected several ordinary incandescent filament bulbs between the legs of the U-shaped bar. When the equipment was powered up, the lamps lit with a brilliant cold white light. This is quite impossible with conventional electricity, and it shows clearly that what Tesla was dealing with was something new. This new energy is sometimes called "cold electricity" and Edwin Gray sr. demonstrated how different it is by lighting incandescent-filament bulbs directly from his power tube, submerging them in water and putting his hand in the water. Cold electricity is generally considered to be harmless to humans. Ed Gray's power tube operates by generating radiant electricity waves by using a spark gap, and collecting the energy using three encasing copper cylinders surrounding the spark gap. The cylinders are drilled with many holes as that enhances the pick-up and the load is driven directly from the current in the cylinders. When lighting bulbs, Ed used an air-cored transformer made of just a few turns of very heavy wire. I, personally, am aware of two people who have independently reproduced Ed's power tube.
Tesla viewed the streamers coming off his coils as being wasted energy so he tried to suppress them. He tried a conical coil but found that this accentuated the problem. He then tried placing a copper sphere at the top of his coil. This stopped the streamers but electrons were dislodged from the copper sphere, creating really dangerous conditions. This implied that metals generate electron flows when struck by the coil streamers (as had been seen when the streamers had been aimed at remote metal plates and current was generated as a result).
Tesla designed, built and used large globe lamps which required only a single external plate for receiving the radiant energy. No matter how far away these lamps were from the radiant source, they became brilliantly lit, almost to the level of an arc lamp and far, far brighter than any of the conventional Edison filament lamps. By adjusting the voltage and the pulse duration of his apparatus, Tesla could also heat or cool a room.
Tesla's experiments suggest that a method of extracting free-energy is to use a Tesla coil which has a metal spike instead of the more common metal sphere at the end of the "secondary" coil. If the Tesla coil is fed with sufficiently short uni-directional pulses and the "secondary" coil pointed at a metal plate, then it should be possible to draw off serious levels of power from the metal plate, just as Tesla discovered. This has been confirmed by Don Smith who uses two metal plates separated by a layer of plastic dielectric, forming a capacitor. He states that a well designed Tesla coil is capable of producing currents as high as the voltages and he demonstrates a hand-held 28 watt Tesla Coil played on the first plate producing a substantial continuous spark discharge between the second plate and ground.
also see http://www.scribd.com/doc/43184405/Practical-Guide-to-Free-Energy-Devices-Dec-2010-for-Scribd-OCred (http://www.scribd.com/doc/43184405/Practical-Guide-to-Free-Energy-Devices-Dec-2010-for-Scribd-OCred)