Overunity.com Archives

So far this is BTG ,self running with minimum components, You got schematic for this one ?

ikako chubinidze
https://www.youtube.com/watch?v=gz0IPdPbHvA

Chibinidze replication by Grumage.

https://www.youtube.com/watch?v=VXIca35GeIY

Only post tested schematic or your experiment video on succesful kapanadze generator BTG.

The forum is full of schematic and no one cares to tell if one specific work :(

If you have succesfully replicated. If it's opensrc'd then everyone will replicate and large corporation cannot stop entire population with their threats.

If you wont share working DIY/schematic by fear/greed of large corporation then the technology wont come to light and no revolution.

No point suppressing such technologies.
secret == threat.
opensource == profit/fame.

Just imagine if you opensource it (with diff alias,ip identity, tor browser), then no need to fear from anyone.
The moment you share working model opensrc, very next minute people will start replication and share their
kapanadze generators which they kept hiding..trust me there will be so many..i am sure many of our forum members
have succesful running kapanadze device.

It's been so many years and yet no working kapanadze generator opensrc'd.

If you fear or want's to stay anonymous then PM me and i will opensrc it , i wont claim your design, i will simply share here and on every possible platform i could ..

I have another schematic , anyone tried this? is this working? what are grenade coil awg? number of turns? etc ?

i attach..

Regards

JUST SHADING SOME LIGHT.

Throw away all schematics, what we need is understanding of principle. All those schematics only teach us that energy is somehow coming from ground that's all

Quote from: forest on November 27, 2022, 01:38:53 PM
Throw away all schematics, what we need is understanding of principle. All those schematics only teach us that energy is somehow coming from ground that's all

My understanding:
1.Create potential high enough to attract electrons from the ground. Tesla secondary is our HV and feeds "antenna" . "Antenna" is wrapped outside "grenade" coil.
2. Do not destroy "resonance" in case of Tesla Coil. Secondary has to be free, not connected to anything.
3. Peculiar way "grenade" is coiled- in my opinion this is  reverse of Tesla. To receive energy and step down to lower voltage we can't just use another Tesla coil in "reverse", because coupling from HV secondary to few turns primary is very low. We need to maximise coupling . That's why few turns HV "antenna" is wrapped outside dense "grenade" coil. "Grenade" coiling way- to minimise inductance.
4. Particular length of earth cable-  might have something to do with 1/4 wave


Cheers,
Pix

   Guys:
   With or without a schematic, no one has been able to replicate any of Kapanadze's devices. That is why there is no verifiable open source information on it. And his patents don't explain enough of just how to build it, either.
   That is also why Akula started his own versions of the original Kapanadze self running   device. Which were later replicated by Ruslan, and then later by Stalker, and also by the late Andrian Gustav, who is now dead.
  I don't think that the schematic above is from a Kapanadze device. As Tariel could not build such a circuit, nor could his son.
  Concerning the Earth ground line, keep in mind that Akula showed his second self runner operating without an Earth ground, for a while. But, overheating of the device was his issue to deal with, without using a ground connection on the circuit.
He showed that is was possible, though. As well as proving that the extra energy does NOT come from the ground.
Yet Earth grounding is needed for maximum gain, and to help keep the device from overheating.

  If any of you are going to be replicating the above posted circuit, you're going to need more than just some luck, in actually getting it to work, and self run. Replicating these types of devices, is not for the faint of heart, or impatient builders, with no test gear.

   NickZ

MY UNDERSTANDING IS THAT THE EARTH IS A FULLY CHARGE CAPACITOR. EVERY MILLI SECOND
THERE ARE LIGHTING STRIKES THAT IS CHARGING AND DISCHARGING THIS MASSIVE CAPACITOR. THE
CONSTANT STRIKES OF LIGHTNING CREATES RIPPLES ON THE FLUID OF CHARGE. SO TO RETRACT THIS CHARGE
ONE NEEDS TO APPLY SPECIAL ELECTRICAL FUNDAMENTALS. SUCH AS RESONANCE, STANDING WAVE, AND SPECIFIC
PHASE LOCK LOOP  CIRCUIT.

All these years and still the same scumbags on here.  After all thats come out about what the people have been doing that pay you "hero" members, and you continue to deceive everyone and turn them around and keep us enslaved.  99% of the hero members have been on these forums for so many years, it makes me sick.  Our whole world is on the brink of destruction and yet everyone of you keep working for the cabal.  You all are traitors to this country and humanity and your soul will have to pay in the next life, weather you know it or not.  Sry new guy for messing up your forum. 

Quote from: elementSix on November 29, 2022, 12:48:12 AM
All these years and still the same scumbags on here.  After all thats come out about what the people have been doing that pay you "hero" members, and you continue to deceive everyone and turn them around and keep us enslaved.  99% of the hero members have been on these forums for so many years, it makes me sick.  Our whole world is on the brink of destruction and yet everyone of you keep working for the cabal.  You all are traitors to this country and humanity and your soul will have to pay in the next life, weather you know it or not.  Sry new guy for messing up your forum.

1. You are here since 2011
2. 350 posts
Seems you have the answers.....


Cheers,
Pix

FULL OF HATRED AND ANGER . I WILL PRAY THAT YEHOVAH WILL SET YOU FREE
BUT YOU NEED TO REPENT AND STOP REBELLING AGAINST GOD NATURAL RIGHTEOUSNESS.
REPEAT THIS PRAYER AS MANY TIMES AS YOU CAN ELLEMENTSIX  LORD JESUS CHRIST SON OF GOD PLEASE
HAVE MERCY ON ME A SINNER. AMEN.

Do you remember Herman Plauson devices ?  Between ground and elevated capcity there is potential capable of generating current. I think  Tesla , Kapanadze and others created antenna replacing elevating capacity to attact ground electrons (or rather free electrons in metal at ground potential) to "think" they are attached to highly elevated capacity. So yes, energy does not come from ground but ground is required. In fact Tesla said it clearly in his article from 1900, and even posted analogy descibing process of obtaining energy at the "faster rate". This method is not different then heat pump.
Statement : Of course those are only theoretical divagations

Quote from: forest on November 29, 2022, 09:50:33 AM
Do you remember Herman Plauson devices ?  Between ground and elevated capcity there is potential capable of generating current. I think  Tesla , Kapanadze and others created antenna replacing elevating capacity to attact ground electrons (or rather free electrons in metal at ground potential) to "think" they are attached to highly elevated capacity. So yes, energy does not come from ground but ground is required. In fact Tesla said it clearly in his article from 1900, and even posted analogy descibing process of obtaining energy at the "faster rate". This method is not different then heat pump.
Statement : Of course those are only theoretical divagations

Hi Forest,
1. I you create high positive potential  , that potential attracts ground electrons. That's why in Kapanadze and other replications  there is a Tesla Coil part to create HV, and there is spiral antenna wrapped losely AROUND "grenade" coil. Very high potential electric fields generated by "antenna" acts on "grenade coil". Why "grenade" is wound this way I am not sure 100% but I guess it is to minimise inductance because "antenna" action on the "grenade coil" must be electrostatic not magnetic.


2. Another thing regarding a "heat pump analogy" - I totally agree. I imagine Tesla Coil and COP>1 devices by a "heat pump " analogy: converting not so useable low grade "ambient" energy into "high grade" useable energy.
Tesla coil is a slow wave helical resonator, in it's resonant freguency secondary coil ACCUMULATES incoming energy. With every incoming impulse from primary- wave amplitude in secondary rises: 1,2,3,4,5,6....  At  the same time energy accumulated in secondary increases squared: 1,4,9,16,25,36  It is expotential rise of electromagnetic energy accumulated in Tesla secondary. The results in enormous reactive enegy , high potentials on top of 1/4 wave resonator and high currents on ground point. Imagine enormous Poynting Vector enerygy flow on Tesla secondary.
To get a "heat pump" result- we need to unload periodically that accumulated energy into "stepping voltage down" device.  Through rotary spark gap like in Turkish video, or "Kapanadze" way- by antenna acting on some kind of "grenade coil".
All we need is to tap to some electromagnetic wave of certain frequency F1, addjust Tesla resonator to that F1 frequency and unload accumulated energy periodically with frequency F2<<F1.
It could be a radio  wave, Schumann wave or- as in typical Tesla : LC tank circuit
Lower frequency minimises radiative losses from Tesla resonator.
Those are my thoughts on Tesla, Kapanadze and derivatives.


Cheers,
PiX

Quote from: NickZ on November 28, 2022, 09:33:52 AM
   Guys:
   With or without a schematic, no one has been able to replicate any of Kapanadze's devices. That is why there is no verifiable open source information on it. And his patents don't explain enough of just how to build it, either.
   That is also why Akula started his own versions of the original Kapanadze self running   device. Which were later replicated by Ruslan, and then later by Stalker, and also by the late Andrian Gustav, who is now dead.
  I don't think that the schematic above is from a Kapanadze device. As Tariel could not build such a circuit, nor could his son.
  Concerning the Earth ground line, keep in mind that Akula showed his second self runner operating without an Earth ground, for a while. But, overheating of the device was his issue to deal with, without using a ground connection on the circuit.
He showed that is was possible, though. As well as proving that the extra energy does NOT come from the ground.
Yet Earth grounding is needed for maximum gain, and to help keep the device from overheating.

  If any of you are going to be replicating the above posted circuit, you're going to need more than just some luck, in actually getting it to work, and self run. Replicating these types of devices, is not for the faint of heart, or impatient builders, with no test gear.

   NickZ

Quote  That is also why Akula started his own versions of the original Kapanadze self running   device. Which were later replicated by Ruslan, and then later by Stalker, and also by the late Andrian Gustav, who is now dead.

'Akula', 'Ruslan', 'Stalker' Are this buddies registered here! someone got any way to reach them to share their thoughts in this thread!

QuoteI don't think that the schematic above is from a Kapanadze device. As Tariel could not build such a circuit, nor could his son.

I think ,i read somewhere here, some guy shown them device in some aviation hanger and someone tried to steal his design, who?tariel or taimur ? sorry, if i'm mistaken ,i dont wont to blame anyone.
Regards

Quote from: worldcup on November 30, 2022, 10:09:13 AM
'Akula', 'Ruslan', 'Stalker' Are this buddies registered here! someone got any way to reach them to share their thoughts in this thread!
I think ,i read somewhere here, some guy shown them device in some aviation hanger and someone tried to steal his design, who?tariel or taimur ? sorry, if i'm mistaken ,i dont wont to blame anyone.
Regards

   worldcup:  Please remember that you are new here on this forum thread, and if you don't know or haven't heard of Akula, Ruslan, nor Stalker, and their shown self running devices, you have much to learn. No, they are NOT members here, nor can they be easily reached, and they have most likely all been warned to stop, or else. No joke...
   
   This thread is about a working Kapanadze circuit. The only "working TK devices" are the ones shown by Kapanadze himself. Yet, there are many similar type of device replications made mostly by Slavic people. Not all are shown, nor will be shown self running any more. Due to the above mentioned threats.
   These are serious devices, not to be taken lightly for various reasons. As they also have been associated with UFOs power systems, antigravity, and other electromagnetic anomalies. So, we also have lots to learn... while the various governments are trying hard to keep all this a hidden secret, as long as possible.  That is why there is so much mystery behind free energy, and self running devices. And is still something that none of us on any of these forums have been able to show working and self running. Most input to output readings are false, with these types of devices. And so, these types of OU readings are practically impossible, and will not provide us with actual and accurate details. At least not yet...Therefore, self running devices are what are really needed, and not more theories, and input to output tests, as some kind of proof.
   worldcup, please limit and resize your attachments to less that 960 pixels wide, or you mess up the width of this page, like it is now.The page will reset by itself to the correct dimensions, once it gets to the end of this current page.   Thanks,
               NickZ

.

any inputs ? not even close to BTG!

any inputs  on this attached circuit from ikako chubinidze video ?

anyone could translate!

   @worldcup, and for any other newbies, that don't know me:

   I believe that the first diagram is not from any actual self running device. As there is no feed back path, compared to the second device diagram that you posted above.   As no one has been able to replicate the first diagram, do you really want to take a whack at it???

   If you just want to see a bunch of schematics, I can fill the order for you... but remember that there is no one here that has come up with an OU device, nor self running.  And, that most of these diagrams or schematics are wrong. And can't just be replicated without headaches.


   My recommendation is to look and study the Stalker devices and his videos, as the videos are well documented, and full explained. Although in Russian, and still without success from replications from any of us here, nor on some of the other forums.

   Stalker:  https://www.youtube.com/playlist?list=PLRYhzUMB2BkLXLVDOUIhc1TU-ZTq1WvPT (https://www.youtube.com/playlist?list=PLRYhzUMB2BkLXLVDOUIhc1TU-ZTq1WvPT)

   This image below, is my replication of the Stalker simple Kacher version. And no, it does not self run, as yet. 
    Sorry for the blurry image. If anyone is interested, I can try to find a better and clearer image of it. 
    One of my videos from my YouTube channel:  https://www.youtube.com/watch?v=9UxOvZatzKY (https://www.youtube.com/watch?v=9UxOvZatzKY) 
    NickZ

Quote from: NickZ on December 11, 2022, 09:03:57 AM
   @worldcup, and for any other newbies, that don't know me:

   I believe that the first diagram is not from any actual self running device. As there is no feed back path, compared to the second device diagram that you posted above.   As no one has been able to replicate the first diagram, do you really want to take a whack at it???

   If you just want to see a bunch of schematics, I can fill the order for you... but remember that there is no one here that has come up with an OU device, nor self running.  And, that most of these diagrams or schematics are wrong. And can't just be replicated without headaches.


   My recommendation is to look and study the Stalker devices and his videos, as the videos are well documented, and full explained. Although in Russian, and still without success from replications from any of us here, nor on some of the other forums.

   Stalker:  https://www.youtube.com/playlist?list=PLRYhzUMB2BkLXLVDOUIhc1TU-ZTq1WvPT (https://www.youtube.com/playlist?list=PLRYhzUMB2BkLXLVDOUIhc1TU-ZTq1WvPT)

   This image below, is my replication of the Stalker simple Kacher version. And no, it does not self run, as yet. 
    Sorry for the blurry image. If anyone is interested, I can try to find a better and clearer image of it. 
    One of my videos from my YouTube channel:  https://www.youtube.com/watch?v=9UxOvZatzKY (https://www.youtube.com/watch?v=9UxOvZatzKY) 
    NickZ

Nice work, can you please share your schematics. What's new in your kacher?

Which scheme do you use as a basis - not only for kacher, the hole setup.

Greetz.

бронепоеэд бтГ ~=>  armored train BTG

https://translate.google.com/?sl=ru&tl=en&text=%D0%B1%D1%80%D0%BE%D0%BD%D0%B5%D0%BF%D0%BE%D0%B5%D1%8D%D0%B4%20%D0%B1%D1%82%D0%93&op=translate

Sil

Some did successful test with TK ..here is research article    https://www.researchgate.net/publication/287608668_Replication_And_Study_Of_Kapagene_Generator (https://www.researchgate.net/publication/287608668_Replication_And_Study_Of_Kapagene_Generator)

Quote from: mmm4free on December 13, 2022, 10:27:22 AM
Nice work, can you please share your schematics. What's new in your kacher?

Which scheme do you use as a basis - not only for kacher, the hole setup.

Greetz.

   As I mentioned, I use the Stalker push-pull circuit as in the attached post below. And my Kacher is the simple kacher, there is nothing "new" about it. It can provide for a HV HF streamer of up to one centimeter long, or about 10.000v output. It runs best at about 1MHz, and at 5000v. While my induction circuit runs best at about 18KHz. I don't use and set calculated frequencies, and they don't work as people think that they should. I tune the whole system to it's best highest output, instead.
   Even though both the push pull, as well as the Kacher are in sync, and do work perfectly in there own order, or in a normal way, however, there is no OU.
   Remember that the "Kapagen Generator" is NOT a free energy device. And never has been... Like with my set up, they are just inverters.
   Good for Deco Art... so far, that's it, and that's all.
   NickZ

Nick that old catcher circuit is a red herring it is a wast of time it's just a Tesla coil and it's HV winding is connected to earth
through the the active devices Base Emitter junction look at Akulas other circuits earlier on in this thread.
Try and use a full wave bridge or driving it with logic and connect the HV winding to an isolated earth.

Sil

Quote from: AlienGrey on December 16, 2022, 04:18:56 PM
Nick that old catcher circuit is a red herring it is a wast of time it's just a Tesla coil and it's HV winding is connected to earth
through the the active devices Base Emitter junction look at Akulas other circuits earlier on in this thread.
Try and use a full wave bridge or driving it with logic and connect the HV winding to an isolated earth.

Sil

   AG:   You have said the same thing a thousand times. I will wait for you to show how well your set up works. No need to make suggestions for me.I won't never follow any of your suggestions until YOU show how well they works for you. As you seam to have no idea what you are suggesting. And never have...only wanting someone else to do your work. Well, it's not me that is going to waste more time on what you think. Got it?...
   
   Three different people have built and shown the same simple kacher device that I have, self running. Ruslan, Stalker, and Adrian Gustav.
I don't see your name on there.  And those three different people show it self running, even in the field.  What have you shown, to be making suggestions??? Nothing...
   I would love to see you build this up, just so I can say to you, I told you so. Set frequencies have NEVER worked. And never will.
   So, go for it, build it up, tune it the way you want, and watch what happens. Of course, that will never happen... as we all know.
You just like wasting my time to answer you. So, please understand, if I don't answer you. It's because every time I show and explain about my replication, you just shit on it.  I really just wish that I could ban you from my life, and forums.

   Sorry to say...but I've had enough of this guy. Seams as though he is only here to spread more and more disinformation, and will never actually build anything at all.
    I really would rather talk and work on something that actually WORKS...instead of hearing useless suggestions from those that don't know.
   I tried to make my own moderated thread, but I guess that Stefan is too sick, or would rather not help me out with this, so I have to continue to put up with more of this kind of thing, here.   Thanks, Stefan...
   

   NickZ

Yeah now eat your words

Its just driven with a push pull at a low frequency and the high voltage is not down to earth.
The coil is wound with what looks like it could be any thing from 26 to32 Gage copper wire
and looks like is about 0.5 Mtr in length if the tubes are 8''. As he changes the Fregcy the
lights change position, amusing.
Pic is from a guys live video, I couldn't copy as protected. As i'm running basic Win 7 it has
no up dates it has no drivers! So cant save much.

   Guys:   Here is an older video of mine showing the interaction of the Kacher to the induction circuit.  My simple Kacher,  just by itself can light even a 100w bulb, in this video below it is lighting a 50w bulb. So, you tell me if the simple Kacher "takes away what it gives". As I don't see that at all. I see it doing what the controlable kacher can't do, instead.
   I believe that it is wrong to assume that the simple tuned Kacher does not work. It works even with a 600w load. Let's see the controlable type of kachers show an interaction, while lighting up 600w loads. I have not seen that shown by any device, other than mine, by any of the guys in any forum, as yet. Including Geofusion, Itsu, apecore, tomtech, nor any others that have actually made this replication or a similar one, up to now. And are not just guessing...
  Point being, that if you don't have enough output from the device going to the feed back circuit, you don't have a chance at self running. And none of the controlable Kachers, have shown that ability, nor have enough interaction to do much of anything, at all, up to now.

   Video: https://youtu.be/ofA-rtYe9hM (https://youtu.be/ofA-rtYe9hM)
   There are lots more videos, showing the many tests made on this device, on my YouTube channel under my name, Nick Zec.
   BTW:  I still have the same device further along and still all together and on my bench. Unlike most everyone else..

   NickZ

Nick yes I have looked at a few of your vids, but doesn't the katcher in your vids draw a few amps
So wouldn't that make your device a pulse width device and thus none overunity.
The one in the pic appears to have loads of nodes and anti nodes.
I dont think the one shown draws more than a couple of watts at 12 volts.

Sil

   AG:   Below is the simple original Kacher, built by Ruslan as shown on his video. It is the same as mine, same as Stalkers, same as Adrians device which he had shown self running in the field.   Do you really think that you know more than these guys?  Build the whole device, prove your point, whatever that may be.
SHOW how they are all using your same ideas to sync their devices. Show how the frequencies are all the same as you think that they are. And show how even one of their devices are actually working as how you suggest, and is tuned your way.  You can't...because it all BS, and you've mentioned it many many times.
   You keep repeating the same BS, for years. Boring...  I won't take suggestions, from someone that doesn't know what he is talking about. And who as never built this device, and never will show us how well it works to self run.
    "Eat your words" you said above,  and you showing an a Tesla coil inverter lighting some bulbs off of the grid.  WOW...  very convincing.
But, there is no OU by neither the Kacher nor the induction circuits, by themselves. And this thread is about self running devices, and free energy, remember.

   Sorry for the blurry image, taken years ago when we had poor cameras.
  IF this type of simple kacher will not allow for self running of these devices, then ALL the other self running devices shown afterwards are faked as well.
  As one can't talk about FE truths, while showing fake self runners, and telling lies. So, which is it...real or fake?
   NickZ

I've been waiting too for Sil to show us something instead of playing arm-chair quarterback.

And yeah, I don't have my device assembled anymore--had to move 1800km away.  I would reassemble it, but I still have a lot of unanswered questions before I do.

Nick, wasn't it GeoFusion that was kind of getting close to something but again, not a true runner?

The whole "pulling current across the ground wire" seems so elusive.  I've seen videos of this on other devices as well, but to me, it has a lot to do about how their house is wired/grounded and where that ground wire goes.  A couple weeks ago I disconnected a power cable from my house that went to my barn about 50 meters away having separate ground rods.  Got quite a shock from the difference in potential between those two grounding systems and after my vision returned a few minutes later, I dabbed the two conductors with a jumper wire and got some pretty good sparks.  I did not expect that at all.  I'm talking ground wires here; when I shorted them, no circuit breakers tripped.  I have to wonder if a similar thing is happening in some of these videos.  Whether there is enough potential there to push a device into what appears to be self-running?  I don't know.  I do know there is real power there, or can be.  I also know from what I witnessed, it would be real easy to setup a good-sized Tesla coil in one building and via single wire grounding get some serious juice in other another building.  So could these devices be easily faked?   Yes, I think so.  I could probably do it if I wanted to attract a lot of attention.

For the video of Ruslan out in the middle of nowhere with his device, if some part of it was tuned to a specific frequency (say of one of his radio towers he broadcasts on), could he pull 5kw from an earth ground?  Seems unlikely, but we've all heard the stories about these devices only working in certain locations.  They all may be actually using Tesla technology, but not the way we assume.  It would kind of suck if we discovered this was the trick all along, but it would still be nice to know.

Another thing I wondered about is whether full grid power systems create some sort of earth potential between them.  You have 100,000 volt high tension lines running all over the place, grounded at specific points.  What happens when you stick an earth ground between these two systems?  Again, can you use a Tesla transmitter tied to one grid system and pull from ground to close the loop?  Suppose the Wardenclyffe concept can be shoehorned on top of the current grid system we already have and suppose the videos we've all been watching are actual demonstrations of this.  Again, wouldn't that piss you off?  It would for me, but I'd still like to know before completely giving up on this stuff.

Ever wonder why none of these claimers seem to be powering their homes for months with these devices?  If to make them work they have to keep a 20kw Tesla transmitter going, I'm sure that would get a little expensive.  I don't think they are getting free power.  There's something else going on we are not seeing.  It's that magician's trick to have us look at one hand while the other hand is enabling the illusion.

Sorry to be pessimistic, but I know there is an answer to all this, we just need to look in a different place to find it.  Once we find it and can replicate everything we've seen so far, then I'd say we have our answer and I guess get along with our lives wherever that goes.

That is the reason why Tariel Kapanadze did tests on island wihoyt power lines around. It worked fine with ground rod.

https://www.youtube.com/watch?v=oXLxTjc9m3k

No possible way any of those boats out there have a Tesla transmitter in them right?

I'm still not convinced we really understand everything we need to know to properly assess what otherwise appears to be magic.  I don't doubt the device is harnessing energy, but where's the source?  And if I have that exact device sitting on my workbench without the same source nearby, will it appear to self run?  I don't think it would.  I think NickZ has a functional device, but he just isn't anywhere near a source that is in-tune with his device, otherwise it would appear to produce excess energy.  Just my opinion, one of many, toss it out the window if you feel it has no merit.  I'm just stating we don't know the whole story because if we did, we could do this too.  I think what we are looking at is a binary system and we only built half of it, hence it appears not to work.  If we build the other half, it likely would work just fine.  Trouble is, it doesn't give us what we are really looking for.  Now if I was one of those investor swindling kind of guys, I'd build the other half and not tell anybody.  Then make a bunch of YT videos while hounding all the folks that are naysayers and ignore the true scientists and expert engineers.  Everyone else would idealize me and try desperately to replicate my work.  And I could give them one half of it on a silver platter and they still couldn't replicate what I'm doing.  They'd try and try for years and get nothing but a lot of frustration, wasted time and resources.  If I did all that, I would truly be a genuine asshole and I'd deserve to have someone kick the crap out of me someday.  Has that happened to anyone you know of?  Should it?

Again, I don't like being the bearer of bad news, but I think we all need to take a few steps back and see if there is a bigger picture here.  There has to be a puzzle piece that fits perfectly in the open slot.  Maybe it's time to no longer assume good intentions and look at things for what they are, ugly as that might be.  I can handle the truth, can you?  The truth might be I'm too stupid to ever build let alone understand how one of these devices work.  That's one option.  I stated another.  Are there more options?  I'm well aware of my limitations.  Is anyone denying or ignoring theirs?  Would it be best if we just shoot the messenger?  Would that really change anything?  Some would feel better I reckon.  Maybe I'm just getting crotchety in my old age.  Maybe it's time I say what I think because as my clock winds down, I'm not so worried about tomorrow like I was in my youth.

   Guys:   We still have much to learn, not only about these table top projects, but also about the bigger large scale ones, like the 100KW models, such as the ones that  Kapanadze had shown from the beginning.  I have no doubt that this is all more than just possible, and has been for years, but it still being kept secret, at all costs. Or what do you think that the thousands of people working for the government are doing in all those secret underground facilities??? Making rice noddles, perhaps. Or how do you think that the pyramids and temples were all lit up, thousands of years ago, without showing any smoke on the walls or ceilings. Think about it...
   
   We need to look into the spirit of things, as that is where the source of power for these self runners is coming from. The spiritual or metaphysical aspect of free energy, and it's non material sources. Such as the Aether that Tesla mentioned, over hundred years ago. But, will never be taught nor mentioned in schools.  Talk about cover ups...   Current science does not believe that there are other dimensions, since they can't prove it, as yet. They will discount the fact that their current technologies are very limited to material fuel sources only, and its negative effects. Like pollution, and nuclear wastes, water contamination, etc. So, we'll keep burning thing up.  Of course, that just won't cut it, when dealing with free energy, antigravity, UFO power sources, wormhole technologies, etz...or any other non material aspect of science. As our science, which is still being taught in our schools today still wants you to think that Sunlight comes all the way from the Sun. Well that is not the case, at all, nor even adds up to anything but more lies.  However, it is an example of how we have been conned, for as long as possible, and they are still at it. And therefore, our lack of progress...
   However, 2023 is supposed to be the year of CONTACT.  I'll remind you all of what I said today, at the end of next year. 

   NickZ

Dog One ( sorry to post after Nick , was plunking keyboard in response to crotchety and ...)
It is good to see you around !


I know over the years you have toiled on many projects and tried to help manage open source resources,
it's hard to say just why So many "Nil results " or no self running ( looped no batteries etc) units shared open source  !


While it's obvious we do inhabit a true sea of energy... Mother Earth ain't sharing ..or allowing or
?
Good news is that most won't stop hunting... the more hands and eyes on the task ( open source)
the better the odds ( yes it's good to have some kind of empirical path )


Your input is very valuable to community ( your experience with management of FE resources and many varied experiments)


Dropping you a note on some "water fuel" experiments... ( heresy to write those words in science)
I believe some things were missed ( for the Everyman ).


Could use your experience and opinions on these varied paths we could take to make fuel and heat
With water as a prime mover ??( just talking "consult work" not building anything!


Sorry for off topic ...( trying to form a path towards a new open source  topic ( where I have the skill set to build )
Respectfully
Chet K

sorry- wrong topic

Here's some old video's...
https://www.youtube.com/watch?v=3thvqFhFIfY
Tariel Kapanadze overunity motor 01 free energy

https://www.youtube.com/watch?v=qVUN3GsekKQ
Tariel Kapanadze overunity motor 02 free energy

It's not common knowledge but Kapanadze built many motor/generator devices before progressing to motionless devices.

AC

Bunk circuit, anyone tested ?

Some guy collected all his videos, demo of his device working,notes, ferrite rings in grenade, etc...

Its interesting,must watch,lots of video clips, attached...


Apart from bunk forum circuit, a guy shared me one more circuit from that guy https://hosting4dream.blogspot.com/2019/07/blog-post.html?m=1

A guy shows his coil configuration (hand drawn schematic attached, AL (aluminium) foil .. https://youtube.com/@user-vp3hm9lu2n

Tariel Kapanadze nephew named *david* told him this recipe ... Probably leak? Wesely ,we need your inputs..

one more thing he told was, the grenade of TK is wound with coxale wire with different swg for greater amps. It acts as electrostatic pump.

Also TK got this tech after briebing an official who worked with high ranking R&D institute.

And his modern device are filled with distraction ,like unnecessary circuit and wires here and there..

His device emits small amount of alpha beta, so he uses plexi glass and some black blocking polymer spray on his device.. it's funny haha

Few more things were told, but I'm not from EE background,so I'm not sure..

*i don't blame/claim TK or anyone, its just some info i got after taking to an guy who is not from our forum. I have respect for TK and anyone involved with this device*

attaching.

attaching..

attaching...

attaching....

attaching....

attaching......

attaching more..

attaching more.....

 Pictures are too wide it's hard to see them and read. Besides concentrate on one Bunk's device imho

attaching more...

attaching more....

attaching more.....

attaching more....

attaching more....

attaching more....

attaching more....

attaching more.....

attaching more.......

attaching more........

attaching more.........

attaching more........

attaching more.

attaching more.......,

attaching more/

attaching more...

attaching more..........

attaching more

attaching more.......

attaching more.......

attaching more....[..

attaching more.......

attaching more.......

attaching more...ds...

attaching documents.

Bunk + Circuit - Attaching Videos/Device/Rep/Demo...

- download and upload on your channel,spread -
Don't know ,might come handy some day..
i created YT channel in hurry with no proper verification, so channel might turn down in future :P

https://youtu.be/wyY-v6UrjMg

https://youtu.be/0Jcd7SEiprc

https://youtu.be/N_wg4gBabLE

https://youtu.be/_Iveq4PhDOE

https://youtu.be/nhPkIH9G6Iw

https://youtu.be/Daw7drTUbcs

https://youtu.be/eW0ejREPkLs

https://youtu.be/tmrEHaMq3c0

https://youtu.be/UtVEvMzls0M

https://youtu.be/TrxUYP0I-eE

https://disk.yandex.ru/d/LDO5dun9Gd5oJw?w=1

https://www.youtube.com/watch?v=BfNLaSSmnHY (Check this guy's channel videos,interesting - Some secret's revealed)

Can you complete Bunk device docs and pictures in one place ?

@forest, check i uploaded videos and all available material..it was pain in a** to get all done ,
bulk attachment was so buggy that i had to redo multiple times.. took 2+ hours...

@forest ,here is drive link , it contains all the material i uploaded + some material ,
schematic etc i couldn't upload because some issue with CMS attachment..
Here you go: https://drive.google.com/file/d/1Oe5pfg2V-FFtmvOn75gX2TG8UhCwSWXz/view

others, please dont complain about resize, etc etc..i did my best :P

Thanks forest, i saw your post in middle but couldn't reply as i was uploading :P

all is done :)

---some active discussion on bunks topic---
https://energyscience.ru/topic480.html
and
https://energyscience.ru/topic517.html

globalists and cabal panicking soon, Gospod withhold their wrath. thanks for shaaring.

Found two probably Bunk videos which was not in bunk.rar archive. How can I upload them
, where ?

Quote from: forest on December 27, 2022, 09:31:26 AM
Found two probably Bunk videos which was not in bunk.rar archive. How can I upload them
, where ?

YouTube.
Google drive

https://www.veoh.com/watch/v142243474j9HgM3aj
https://www.veoh.com/watch/v142243475gd4yJ6wq

Quote from: forest on December 30, 2022, 04:58:14 AM
https://www.veoh.com/watch/v142243474j9HgM3aj (https://www.veoh.com/watch/v142243474j9HgM3aj)
https://www.veoh.com/watch/v142243475gd4yJ6wq (https://www.veoh.com/watch/v142243475gd4yJ6wq)

Whole set of Bunk videos. I also spent 2 days going through 2 forums with Bunk replies.
видео – Dysk Google (https://drive.google.com/drive/folders/1-wQ7pnidEpaYHLwA1gvoIyEbTGaWN_Ek)
Analyzed all videos and they looks not faked.
Worth to try.

Some video posted on bunka's forum:

https://hhobro.forum2x2.ru/t1-topic#47

attached -

I don't know Mr. Bunk, but I found in my computer old information from a site that no longer exists.
may be it will be help for you...

 :) There you go guys ENJOy working OU device - Happy New Year
_{It's very disappointing and frustrating @Wesley wont reply my question's/queries asked here in community thread, not even over PM...}

I want to replicate Bunk's monster device. Did you read all russian forum about Bunk's devices? Can you answer if his monster device contain any sand/quartz layer ?

Quote from: forest on January 25, 2023, 11:39:33 AM
I want to replicate Bunk's monster device. Did you read all russian forum about Bunk's devices? Can you answer if his monster device contain any sand/quartz layer ?

Hello forest,

Yes i did read all post's in regard's with bunk's device, no where did i find anyone mentioning about sand/quartz.
_{i might be wrong,incase i missed}

But better you try for 'all-in one' which is simple design rather than 'monster setup'.

@monster, you can give this a try , which is proven to work for an online friend of mine as per skype video call demo.
OU exist's, BTG'ng this won't be hard. COP is greater.

_{EE friend, but then again i don't stand by anyone's claim.}
https://overunity.com/19309/working-kapanadze-generator-circuit/msg573371/#msg573371

He shared this base version to me and allowed for me to share, one he shown was much improved
version based on this basic schematic. I did't get chance to try because i lack with materials, HV cap, H/V POT, etc :[

Regards

worldcup


This monster device has Tesla coil with HV winding combining two wires with different diameters and length : 168m and 42m 0,31mm and 0,5mm but I can't find which one is first wound ?

Quote from: forest on January 26, 2023, 10:37:36 AM
worldcup


This monster device has Tesla coil with HV winding combining two wires with different diameters and length : 168m and 42m 0,31mm and 0,5mm but I can't find which one is first wound ?

Hey forest,

For monster setup. i never read author mentioning winding method.

Do you think bunk device got any potential to work? had an positive results with any of his design ?

@Dog-One, was working or might be working on his 'all-in one' design, don't know if he had any progress or positive results..

@forest, you had any succes with lithuiana cadecaus with pickup coil setup in old days?
I've seen you were trying to replicate as i read the thousand pages thread...

I recently opened an (dedicated)thread aswell, Lithuania OU Experiment - Wesley's Theory + schematic+ explanation+step by step (https://overunity.com/19335/lithuania-ou-experiment-wesleys-theory-schematic-explanationstep-by-step)

Regards

Quote from: worldcup on January 27, 2023, 03:37:51 AM
@Dog-One, was working or might be working on his 'all-in one' design, don't know if he had any progress or positive results..

Can't say until it's built, then some testing.  My expectations are low, but who knows, maybe it will show me something.

Guessing a couple more weeks.  Need some parts, then hookup.  I'll keep you in the know worldcup.  Trying to do this one
with precision so I don't second guess myself that I built it incorrectly.  At the moment everything is coming along nicely.
Also documenting the whole process as I go, so should it run, I can post complete instructions how to make more of them
and what supplies you'll need to replicate.  I may even build a second one to verify the instructions.

Quote from: Dog-One on January 27, 2023, 07:48:38 AM
Can't say until it's built, then some testing.  My expectations are low, but who knows, maybe it will show me something.

Guessing a couple more weeks.  Need some parts, then hookup.  I'll keep you in the know worldcup.  Trying to do this one
with precision so I don't second guess myself that I built it incorrectly.  At the moment everything is coming along nicely.
Also documenting the whole process as I go, so should it run, I can post complete instructions how to make more of them
and what supplies you'll need to replicate.  I may even build a second one to verify the instructions.

Thanks @Dog-one.

Fingers crossed for Eureka moment xD

Regards

Quote from: worldcup on January 27, 2023, 03:37:51 AM
Hey forest,

For monster setup. i never read author mentioning winding method.

Do you think bunk device got any potential to work? had an positive results with any of his design ?

@Dog-One, was working or might be working on his 'all-in one' design, don't know if he had any progress or positive results..

@forest, you had any succes with lithuiana cadecaus with pickup coil setup in old days?
I've seen you were trying to replicate as i read the thousand pages thread...

I recently opened an (dedicated)thread aswell, Lithuania OU Experiment - Wesley's Theory + schematic+ explanation+step by step (https://overunity.com/19335/lithuania-ou-experiment-wesleys-theory-schematic-explanationstep-by-step)

Regards

I had no success with lithuania caduceus device. I want to believe Bunk's monster Tesla coil will work. I will post my findings, but that may take a while

Quote from: forest on February 01, 2023, 01:53:44 PM

I had no success with lithuania caduceus device. I want to believe Bunk's monster Tesla coil will work. I will post my findings, but that may take a while

Hello forest,

QuoteI had no success with lithuania caduceus device.

what went wrong, why it didn't work for you! missing some component ? or proper manual ?

I'm slowly arranging supplies , need to spend carefully. So i need to be sure it work for others ,like it did for Lithuania team.
https://overunity.com/index.php?topic=19335.msg573502#msg573502

Sure, will wait for bunka's outcome ..  ;)

Regards

"Sure, will wait for bunka's outcome .. "
Hi, all
I don't know, this is you have already Look:
https://drive.google.com/file/d/1q4JOQIUFv2MTWfjtpRrH5wDWptSwkr_8/view?usp=share_link

Quote from: Boja on February 08, 2023, 05:16:31 PM
"Sure, will wait for bunka's outcome .. "
Hi, all
I don't know, this is you have already Look:
https://drive.google.com/file/d/1q4JOQIUFv2MTWfjtpRrH5wDWptSwkr_8/view?usp=share_link (https://drive.google.com/file/d/1q4JOQIUFv2MTWfjtpRrH5wDWptSwkr_8/view?usp=share_link)

Looks great,


How much output power is that ??
Only powered by a 9 Volts battery ??

Regards, Stefan.

Hi all!
I managed to meet Bunka's friend
named "Googledrome" and he told me a lot of interesting things... I will try to get from Mr. "Googledrome" the original scheme from Bunk! So far, I have managed to get these three videos that I have already shared with you.

I forgot to say that Mr. "Googledrome" lives in Russia in Moscow; and his friend Mr. Bunk, now lives in Canada, in the city of Toronto.

"Looks great,
How much output power is that ??
Only powered by a 9 Volts battery ??"
_______    _______________
Hi admin Mr Stefan!
As far as I have been able to know,
there, in the film "Lake" and the film "Forest", two lamps with a power of five hundred watts each were connected; which is one kilowatt in total... I was told that in the black box there is one additional battery LGAAHD2C1865, 2100 mA.

Bunk's video collection https://drive.google.com/drive/folders/1-wQ7pnidEpaYHLwA1gvoIyEbTGaWN_Ek

and similar videos on his! yt CHANNEL https://www.youtube.com/@missispots/videos

@Boja, yes grab the schematic and open source.

@Boja and others interested in BUNK's device, in late days i have posted lot of material realted to his device ,here https://overunity.com/19309/working-kapanadze-generator-circuit/msg572652/#msg572652

Regards

Lots of people believe Bunk the scammer. I showed him cheating. How hidden wires go.
ehhh..

Quote from: r2fpl on February 11, 2023, 03:49:09 AM
Lots of people believe Bunk the scammer. I showed him cheating. How hidden wires go.
ehhh..

You yourself are the first swindler who arrived here from Poland! Fooling everyone's head with supposedly going wires, either from the table, or supposedly under the clothes in the sleeve ... you brother is just really stupid, along with your stupid and stupid guesses / thoughts ... another narrow-minded would-be whistleblower! Himself, who has not created anything normal and useful, Ordinary is an envious person.

I know the names of dozens of people around the world - successfully repeating the design of Bunk;
- it is true that few managed to extract exactly the same power that the applicant had, but the fact of this Bunk device is undeniable,
and no matter how you opponents - don't try to fill it with mud!

Quote from: Boja on February 11, 2023, 07:11:08 AM
You yourself are the first swindler who arrived here from Poland! Fooling everyone's head with supposedly going wires, either from the table, or supposedly under the clothes in the sleeve ... you brother is just really stupid, along with your stupid and stupid guesses / thoughts ... another narrow-minded would-be whistleblower! Himself, who has not created anything normal and useful, Ordinary is an envious person.

I know the names of dozens of people around the world - successfully repeating the design of Bunk;
- it is true that few managed to extract exactly the same power that the applicant had, but the fact of this Bunk device is undeniable,
and no matter how you opponents - don't try to fill it with mud!

Are you a Russian troll?

Quote from: Boja on February 11, 2023, 07:11:08 AM
I know the names of dozens of people around the world - successfully repeating the design of Bunk;

Really ? show me ! only one who tells the truth is enough.
Why are you here ?

Quote from: r2fpl on February 11, 2023, 11:44:33 AM
Are you a Russian troll?
Really ?

You didn't guess - English.
And why just a troll? You don't really like the truth
to your address? - there will be no shows for you
I don't show or tell a troll
You can not answer, I ignore such.

Boja


Can you tell us on what frequency is Bunk's monster device working on ? Schematic would be wonderfull if possible, is it simply a Kacher or other method of power ?

Quote from: Boja on February 11, 2023, 11:54:49 AM
You didn't guess - English.
And why just a troll? You don't really like the truth
to your address? - there will be no shows for you
I don't show or tell a troll
You can not answer, I ignore such.

Bunk debunked.
(8) бунк - YouTube (https://www.youtube.com/watch?v=wClnOaWio0w)

Quote from: forest on February 11, 2023, 12:18:22 PM
Boja
Can you tell us on what frequency is Bunk's monster device working on ? Schematic would be wonderfull if possible, is it simply a Kacher or other method of power ?

Dear forest! I have exactly half of the scheme from Bunk now, but even this half already works great,
I can send this part to you personally, via private message.

Quote from: pix on February 11, 2023, 12:25:37 PM
Bunk debunked.(8) бунк - YouTube (https://www.youtube.com/watch?v=wClnOaWio0w)

This is a video montage
one of the Russian idiots, - he sweated a lot with it!
from the smelly forum of morons: - energyscience.ru
- Wash them many times!...

Quote from: Boja on February 11, 2023, 11:54:49 AM
You didn't guess - English.
And why just a troll? You don't really like the truth
to your address? - there will be no shows for you
I don't show or tell a troll
You can not answer, I ignore such.

Show me what you've done.
I haven't seen anything useful yet.

Enjoy what you write to me now!
I'll wait.. I have a lot of patience.

Laugh and mock Bunk..
I don't think he cares about you
and everything that you will blow your nose about him ..
He sold his invention to the Chinese, and he lives very well!

Quote from: Boja on February 11, 2023, 12:31:19 PM
This is a video montage
one of the Russian idiots, - he sweated a lot with it!
from the smelly forum of morons: - energyscience.ru
- Wash them many times!...

Mini inverter and two 9V batteries will do.
Przetwornica DC-AC z 12V na 230V 300W falownik - Sklep, Opinie, Cena w Allegro.pl (https://allegro.pl/oferta/przetwornica-dc-ac-z-12v-na-230v-300w-falownik-13135528210?utm_feed=aa34192d-eee2-4419-9a9a-de66b9dfae24&utm_term=test&utm_source=google&utm_medium=cpc&utm_campaign=_elktrk_komputery_akcesoria_pla_pmax&ev_campaign_id=17966335850&gclid=CjwKCAiAlp2fBhBPEiwA2Q10D7J2EsMnu-ZR1v-Ts4UoNqBLaxV9lMra8_3a4DJ3yhf93V2oYgIeQBoCA1sQAvD_BwE)

Quote from: pix on February 11, 2023, 01:02:40 PM

Mini inverter and two 9V batteries will do.
Przetwornica DC-AC z 12V na 230V 300W falownik - Sklep, Opinie, Cena w Allegro.pl (https://allegro.pl/oferta/przetwornica-dc-ac-z-12v-na-230v-300w-falownik-13135528210?utm_feed=aa34192d-eee2-4419-9a9a-de66b9dfae24&utm_term=test&utm_source=google&utm_medium=cpc&utm_campaign=_elktrk_komputery_akcesoria_pla_pmax&ev_campaign_id=17966335850&gclid=CjwKCAiAlp2fBhBPEiwA2Q10D7J2EsMnu-ZR1v-Ts4UoNqBLaxV9lMra8_3a4DJ3yhf93V2oYgIeQBoCA1sQAvD_BwE)

So it easily ignites 2 direct incandescent lamps of 500 watts each, and can ignite the same amount in parallel ..
and, your 300 watts are - unsuitable!

Quote from: Boja on February 11, 2023, 01:00:20 PM
Enjoy what you write to me now!
I'll wait.. I have a lot of patience.

Laugh and mock Bunk..
I don't think he cares about you
and everything that you will blow your nose about him ..
He sold his invention to the Chinese, and he lives very well!

Do not understand. I know Bunk's story from the very beginning when he started his website. Now this site is not working. If the device was real, we would have known it a long time ago. The bank cheats on every video, but only a trained eye and experience show the truth.
Show me any of his videos and I'll tell you how he hid the wires. If you don't see it, you either are inexperienced or you are sent to promote his scam for his gain.

You keep saying that someone has such a device. Someone did etc...
but you don't because you wouldn't be here.

Where are you from ?

Quote from: r2fpl on February 11, 2023, 01:08:34 PM
Do not understand. I know Bunk's story from the very beginning when he started his website. Now this site is not working. If the device was real, we would have known it a long time ago. The bank cheats on every video, but only a trained eye and experience show the truth.
Show me any of his videos and I'll tell you how he hid the wires. If you don't see it, you either are inexperienced or you are sent to promote his scam for his gain.

You keep saying that someone has such a device. Someone did etc...
but you don't because you wouldn't be here.

Where are you from ?

Forum Bunk is up and running right now!
Your information is far from correct.
3 video from September 2022, already presented by me
They can be considered almost - fresh!

Gentlemen
Please no unnecessary finger pointing and blame games
Boja if you have schematic ( or some working part?) please post it..
Of send to Someone who will post it ( me too...)


Here open source forum has tens of thousands of schematics posted for "education "
Purposes and discussion!
Respectfully
Chet K

ramset,
I'll wait until they play enough of their posts - addressed to me, and then I'll show you some of my schemes and films.
I have a lot of patience! I'm in no hurry.

If you don't have patience, then you can remove me from your forum!

Quote from: Boja on February 11, 2023, 01:07:20 PM
So it easily ignites 2 direct incandescent lamps of 500 watts each, and can ignite the same amount in parallel ..
and, your 300 watts are - unsuitable!

Initially I was very interested on Bunk's device and spent a few days translating every russian forum he was active on.
Watch every of his video, some made me suspicious as he didn't show back of his hand ( cable running through sleeve), not lifting up his device completely or holes in the table where he was presenting his device running. This started a warning lights in my head.


It is very easy to hide in his "box" a mini inverter.
So far nobody can give other explanation on Bunk's principle.
Also, you can see a big difference between his first and last devices.
Regarding "500W" incadescent lamp- you can't judge actual power without measuring voltage and amps, plus you could light it with high frequency high voltage power supply.
(8) how to make simple inverter 12v To 220v , 3000W - YouTube (https://www.youtube.com/watch?v=YqAiBRddXLw)

Boja
Here administrator strongly discourages flamewars !
Also there are many persons with build experience
To build and test .... And share results!


Let results guide the path ...
IMO
It is strongly advised for readers to respect builder community
And allow replication for discussion ( and hopefully improvements )


However
The stage is yours ....( respect your wishes
Respectfully
Chet K
Ps
There are moderated build sections here ( where "you" can manage and present info
And moderate off topic to keep focus on builders and results!
Towards a goal of sharing the replication!

Quote from: pix on February 11, 2023, 01:38:43 PM
Initially I was very interested on Bunk's device and spent a few days translating every russian forum he was active on.
Watch every of his video, some made me suspicious as he didn't show back of his hand ( cable running through sleeve), not lifting up his device completely or holes in the table where he was presenting his device running. This started a warning lights in my head.
It is very easy to hide in his "box" a mini inverter.
So far nobody can give other explanation on Bunk's principle.
Also, you can see a big difference between his first and last devices.
Regarding "500W" incadescent lamp- you can't judge actual power without measuring voltage and amps, plus you could light it with high frequency high voltage power supply.
(8) how to make simple inverter 12v To 220v , 3000W - YouTube (https://www.youtube.com/watch?v=YqAiBRddXLw)

Well, he will remove the lamps!
What do you wont on!? - kettle; hair dryer, or whatever you want...
I will pass on all your needs!

Quote from: Boja on February 11, 2023, 01:14:11 PM
Forum Bunk is up and running right now!
Your information is far from correct.
3 video from September 2022, already presented by me
They can be considered almost - fresh!

The Bunk forum was deleted many times by Bunk himself when he was asked inconvenient questions.

This is the original Bunk site. What is this ? nothing ! BS.
https://hhobro.forum2x2.ru/t1-topic

Quote from: Boja on February 11, 2023, 01:51:03 PM
Well, he will remove the lamps!
What do you wont on!? - kettle; hair dryer, or whatever you want...
I will pass on all your needs!

I saw already a boiling keetle video.
Problem is- he didn't lift up that keetle together with base during presentation.
Latest video: [size=78%]Озеро_15.09.2022.mp4 - Dysk Google (https://drive.google.com/file/d/1q4JOQIUFv2MTWfjtpRrH5wDWptSwkr_8/view)[/size]
Again, he didn't lift it up during working. Plus- it is only 18 seconds presentation with bulbs working. Small battery pack with mini inverter will do such presentation.
So, as you see there is always something "fishy" that leaves a doubts.

Quote from: pix on February 11, 2023, 02:12:57 PM
I saw already a boiling keetle video.
Problem is- he didn't lift up that keetle together with base during presentation.
Latest video: [size=78%]Озеро_15.09.2022.mp4 - Dysk Google (https://drive.google.com/file/d/1q4JOQIUFv2MTWfjtpRrH5wDWptSwkr_8/view)[/size]
Again, he didn't lift it up during working. Plus- it is only 18 seconds presentation with bulbs working. Small battery pack with mini inverter will do such presentation.
So, as you see there is always something "fishy" that leaves a doubts.

It always looks the same. Video for entertainment.

Quote from: r2fpl on February 11, 2023, 02:09:46 PM
https://hhobro.forum2x2.ru/t1-topic
This is the original Bunk site. What is this ? nothing ! BS.

And can also say this: This is the original - site?.. What is this ? -Nothing! BS. :)
The inhabitants of this branch, too - Nothing! ;)
@ @ @
https://drive.google.com/file/d/1gPWYh8s6ED7d_-KqyDkAqwQLmGyqFTpj/view?usp=share_link  ;D

Quote from: Boja on February 12, 2023, 05:21:54 AM
And can also say this: This is the original - site?.. What is this ? -Nothing! BS. :)
The inhabitants of this branch, too - Nothing! ;)
@ @ @
https://drive.google.com/file/d/1gPWYh8s6ED7d_-KqyDkAqwQLmGyqFTpj/view?usp=share_link  ;D

@Boja,

https://www.youtube.com/watch?v=JJ_QxE4avlk

the google drive link you posted has video taken from this channel https://www.youtube.com/@igorklim505/videos

is that your channel @Boja ?

@Boja, where is the schematic of BUNK's halk working device?

Regards

Quote from: worldcup on February 12, 2023, 07:41:58 AM
Boja, where is the schematic of BUNK's halk working device?
Regards

worldcup,
Me here users - negligent, they for me - Shit!!!
None of you will get anything from me!
But, one person here - has already received exactly half of the working Mr. Bunk circuit! ...
He who received this, he will not give  lie!
- How can I insert an image directly here?...

ALL Regards

Quote from: Boja on February 12, 2023, 07:58:26 AM
worldcup, - halk
Me here users - negligent, they for me - Shit!!!
None of you will get anything from me!
But, one person here - has already received exactly half of the working Mr. Bunk circuit! ...
He who received this, he will not give  lie!
- How can I insert an image directly here?...

ALL Regards

halk was typo, i meant half.
You can post scheme by attaching in your post, there is attach - choose file option.
see attached video tutorial.

when you attach any images, it will automatially be visible in post.

 :)

I did it again and there's nothing there. Normal discharge of a capacitor fed by one cable.

why did you remove the video?

I will restore...

Quote from: Boja on February 13, 2023, 03:30:21 AM
Hi,
look for your FE further, I don't need it,
I have found everything for myself!

You have nothing but don't worry because others don't have anything either.
If you want to surprise us with something, you must have something original.

 :)

Quote from: Boja on February 13, 2023, 04:42:49 AM
I repeat to you and others that this is - you have nothing! and never will! - Mr. troll...

You only talk but you can also show. Show me so I know your words are not empty.

 :)

Hahaha I don't want anything from you. You come here and show lies that are not yours and say it's true.

 :)

No comment. Waste of time on you  :-X

That's for sure!  Waste of time on you - troll! ;)

- I did it again and there's nothing there: :(

It is well known that for solar panels,
all you need is sunshine!
However, invented and successfully tested, a new open source technology,
how can you do without sunlight!
to receive electric current from these panels,
even in total darkness!

3-4 years ago I told about it,
on the stinking energyscience forum!..
however, the Ukrainian public of this forum,
pretended at that time that they absolutely did not need it! ...
I repeat that everything was given from me
- open source
and no secrets! 8)

Quote from: Boja on February 14, 2023, 12:42:32 PM
It is well known that for solar panels,
all you need is sunshine!
However, invented and successfully tested, a new open source technology,
how can you do without sunlight!
to receive electric current from these panels,
even in total darkness!

3-4 years ago I told about it,
on the stinking energyscience forum!..
however, the Ukrainian public of this forum,
pretended at that time that they absolutely did not need it! ...
I repeat that everything was given from me
- open source
and no secrets! 8)

It is somewhat well known that semiconductor diodes exhibit a non-linear capacitance with reverse voltage but what is not well known, is that these same diodes as used in solar arrays, have a much higher non-linear capacitance to forward voltage.  This parametric change in capacitance could possibly be used for "dark" energy generation.  Is this the technique used by your source?

regards,
Pm

partzman,
No, I don't think it's some kind of "dark" energy in my invention!...
The fact is that semiconductors are subject to many and the most diverse types - radiation!
...and even exposure - radiation!(izotops)
- as in this purely theoretical example:

I wait and see when there will be allowed solar panels with radioactive material layer to put on the roofs. ::)
Plus- phosphorus luminofore layer will make them less efficient from sun radiation.
Not so clever idea.

Quote from: pix on February 14, 2023, 03:19:46 PM
I wait and see when there will be allowed solar panels with radioactive material layer to put on the roofs. ::)
Plus- phosphorus luminofore layer will make them less efficient from sun radiation.
Not so clever idea.

You, not developed, have been told; What! it's just
- for example !, and purely in a theoretical way !! ...
No need to wriggle once again
from myself - a blockhead!
Did I tell you? that you
- irradiated something - with radiation!? ? ?...

You can easily do this(repeat without problems!):
the bottom image is the energy harvest

патент японии
добывание энергии:

Maksimov's electrostatic generator


Video of Dmitry Maksimov, before the channel was closed.
_{(found this posted on bunk's forum and uploaded over bunk's! channel)}

https://www.youtube.com/watch?v=N71tZotAA60

Regards

Chinese Kapanadze
http://www.xjishu.com/zhuanli/60/201710402091.html

Can anyone download the full description after login?

Quote from: r2fpl on March 01, 2023, 04:53:27 AM
Chinese Kapanadze
http://www.xjishu.com/zhuanli/60/201710402091.html (http://www.xjishu.com/zhuanli/60/201710402091.html)

Can anyone download the full description after login?

nice 
https://patents.google.com/patent/CN107196522A/en (https://patents.google.com/patent/CN107196522A/en)

Quote from: alan on March 01, 2023, 07:28:21 AM
nice 
https://patents.google.com/patent/CN107196522A/en (https://patents.google.com/patent/CN107196522A/en)

Thank You :)

There are some more diagrams in the pdf...

Astrange question but were any of you alive in the late 60's or 70's ?
when offices had carpets and teenage girls ware nylon this and that and shoes had doc martin plastic soles
and every time one touched a filing cabinet  a spark would jump from the finger to the cabinet, imagine if that charge could be stored on a high repetition rate, Now there is a thought.

Quote from: r2fpl on March 01, 2023, 04:53:27 AM
Chinese Kapanadze

A rather interesting implementation.  From what I can tell, it's basically
a high voltage resonant-rise LC circuit using a voltage arrestor as a spark
gap.  I'm not real certain what the control signal between the two capacitors
would look like, but this signal is used to adjust the frequency of the input
transformer.  When the arrestor shunts, the input transformer becomes
isolated, so the energy in the capacitors gets dumped across the output
transformer.

I find it a little difficult to believe this circuit could be a self runner, but
if it is getting a substantial energy increase from the resonant-rise, then
I suppose it's possible.  I have a few components around here I could
experiment with and see for myself.  That's what we're here for right?

The Chinese device I haven't played with this device but is you have 2 wingdings one is 180 degree out of phase
with the other wouldn't that create simply generate standing waves ?

Quote from: Dog-One on March 02, 2023, 01:48:42 PM
I have a few components around here I could
experiment with and see for myself.  That's what we're here for right?

Well I tried it.  Used a 7KV step-up transformer for the input and an
ignition coil for the output transformer, configured step-down.  I used
an OPA549 amplifier to drive the input transformer and took my
sine wave signal from my signal generator.  Used about a 1.5mm
spark gap for the arrestor.  For the capacitor, I happen to have
a few 20KV 1000pF pieces.

Once I had the circuit hooked up, I was able to find the resonant
frequency at 26.4kHz.  I slowly up'd the input until the spark started
jumping.  What I saw was the output lamp get dimmer and the
current draw went up a lot.  There were some high voltage spikes
on the output, but they were so short it didn't boost the output
lamp at all.

So at the moment, I'm not really convinced.  I tried probing around
with a ground wire and could get a small arc to jump to it, but no
power increase.  Maybe this thing would work if I was messing with
500kV, but like most of us, that's way beyond what I can work with
on my bench.  It could also be the driver circuit has to be modulated
instead of being a steady sine wave.  I didn't see any reference to
that in the patent, but to me it sounds like something that would be
necessary and not disclosed--basically to hide from anyone all the
necessary ingredients needed to make this thing work.

Not sure what else to try, if anyone has some good ideas, I'll leave
this thing setup for a few days.

There's more going on here than is explicitly stated in the patent.
There are three capacitors in this circuit for a reason and that "signal"
line between the two capacitors in series isn't just for sampling voltage.

I think we are looking at a parametric resonator solution.  The driver
box is effectively shunting and releasing C₂ in-sync with the AC
frequency it is driving the input transformer.  When C₂ is shunted, the
overall capacitance of C₁ & C_X goes up and conversely, when C₂ is not
shunted, the overall capacitance goes down.  This is where you would
get a voltage gain at each cycle.  At the zero cross of the cycle, you
shunt C₂ and allow the voltage to increase and just before the peak,
you open the shunt, the capacitance drops and the voltage has to
increase.

It's a similar method to coil shorting, only instead of locking the
current in an inductor, here we just remove one of the series capacitors
from the circuit and add it back in right when we are near peak voltage
in the tank circuit.  I would suppose then, the voltage seen by the
secondary of the input transformer also increases and being a transformer,
the primary side voltage would also increase, which explains the
arrestor on the secondary side, which is there to prevent the control
box from exploding.

So what I can't really figure out is how the control box is driving the
input transformer.  It states its input is AC220V and if rectified, you
only have a limited voltage there and I would suspect the current
is fixed to some reasonably low current.  Otherwise you're just pouring
in watts which will eventually lead to self destruct.

In the past, I played around with parametric oscillators, but I did my
switching on the inductor side, kind of like Jim Murray's SERPS unit.
It didn't work well because you end up dealing with extreme back EMF
that squirts out and smokes transistors unless the transistors are super
fast and even then nature finds a way to bite you in the ass.  This
Chinese patent is rather novel in the way it uses capacitors to get the
same effect, but it surely isn't clear about the principal of operation.

I'll do some more experimenting with this.  I think I'll need to do
it with lower voltages though.  I don't have anything that will switch
4000 volts for sure.

What we need is a "Smart Switch".

I'm thinking a power JFET would work nicely since it can switch
either polarity.  We place this switch across C₂ and control it
as a self-contained module.  What it would need to do is when
it senses zero voltage across the cap, the switch shunts and starts
a delay timer.  When the timer expires, the switch opens and the
cycle repeats.

In operation, we adjust the delay timer proportionally to the
frequency the whole system is running at.  With a parametric
resonator like this, there are two frequencies:  One is with C₂
shunted and the other is with C₂ in-circuit.  The overall run
frequency will be something in between, tweaked by the delay
timer.  Because of this, we wouldn't want the Q factor to be too
high, so some resistance is a good thing.  Too much resistance
and we'll burn up all the power gain as heat.

Another possibility that might work is to use lossless clamps
on the input transformer and just recycle the power that way
without any output transformer.  I would imagine we still need
some kind of inductor in series with the capacitors.  Kind of
doubt it would work using the secondary of the input transformer
as the only inductor.  Using lossless clamps, the whole system
is by-design looped, if it works, you'd know when the power
supply amperage drops to zero.

Here's a starting point for experimenting.

Q Factor close to 10, with overlapping frequencies.  I would expect
with this configuration, one might actually see some per-cycle voltage
increase if you get the timing right.

If we set the base frequency to 30kHz (33.3us/cycle) and the delay
timer to 1/8th of a cycle, it should be roughly 4.2us--obviously adjust
to best performance.

Anyone good at putting together a simulation to see what this
might actually do?  SolarLab, this is right up your alley.   ;)

Not so good.  The simulator (https://sidelinesoft.com/ic/) doesn't calculate capacitors being
switched in and out of the circuit dynamically.  It tries, but the
timing pretty much gives it away that it can't handle it.  Those
pulses on the green (V1) trace should line up at the start, exactly
on the zero cross, which they do if I run the simulator with the
switch disabled.  And since that doesn't work right, I'm pretty
certain messing with the component values isn't going to show
me the parametric voltage rise I'm looking for.  I actually think
the simulator is trying to modify the frequency without taking
into account the stored energy in the system, which is probably
not realistic.

Anyway, here's the idea and the sim file to explore.

To really test this, I think it will take real hardware.

Fuel-free generator 1 kW

PDF attached, any thoughts on this ?
got from ES / russian forum, password protection removed.

Russian forum...
Still can't see any mechanism responsible for energy gain.

Quote from: pix on March 08, 2023, 06:46:14 AM
Russian forum...
Still can't see any mechanism responsible for energy gain.

Totally agree

If the waveform shown is the output, theres absoloutelu no gain there
A

Quote from: worldcup on March 08, 2023, 03:44:34 AM
PDF attached, any thoughts on this ?

Pretty detailed, but I suspect much of it is misleading, especially the
principal of operation.  Certainly don't buy the whole copper isotope
AMR, surface spin wave stuff.

The only possible gain mechanism I see is the toroid core.  This could
be a parametric resonance (https://en.wikipedia.org/wiki/Parametric_oscillator) configuration.

I've seen that at least twice before when a toroidal shaped magnetic
core is wrapped normal and wrapped in a way that would restrict its
inductance.  The idea here is the winding that would restrict inductance
is oscillated at 2X the frequency of the main winding.  This causes a
pumping action in the main LC tank circuit.  To be overunity, it is
required the pumping action consume less energy than harvested
in the main LC.  To do this, you first have to establish a pretty high
energy flow within the main LC so that the exponential gain you get
per cycle exceeds what is required by the pumping excitation, which
is typically a fixed quantity.  From my testing, it is very difficult to
get a high enough Q factor to do this.  You would need an LC setup
that would ring 40 or more cycles from an impulse while only losing
50% of its amplitude.  Something with that high of a Q factor is
extremely tight on its frequency, so when you start pumping its
parameters, just a slight change in frequency and it quits oscillating.

To credit the writer of that PDF, the Figure 4 push-pull circuit using
a SG3525 chip does work really well.  I've built several of those
circuits and they do the job nicely.  The only problem using them
in the basic form without snubbers is that you must have a proper
load connected at all times, otherwise you blow stuff up.

Reminds me kind of  Zatsarinin transformer.
Tried it, no any "extra" energy from it.
All that fancy coiled coils and "resonances" per se will not create excess energy.I see only two ways of getting "extra" energy:
1.Harnessing power of atoms, fusion, fission, induced atoms transmutations ect.
2. Capturing it from enviroment, similiar like photovoltaic cell converts sun rays to electricity, wind turbine captures wind  or a heat pump captures latent heat from the atmosphere.


In electromagnetic field a  heat pump analogy would be converting high frequency low amplitude/energy electromagnetic waves that are around us into low frequency high amplitude wave.
This could be done "Tesla Magnifier" style, by use of helical resonator.
In such helical resonator tuned to certain frequency, wave having that frequency doubles in amplitude during each period, and resultant  energy accumulation rises at amplitude squared tempo.
Resonator plays  a heat pump compressor role.
"Compresses" large amount of freely available low grade electromagnetic energy into smaller pack of high grade energy.
Converting high frequency high voltage into lower voltage useable current?
Electric discharge, spark gap.
There we have electrons multiplication by the expense of electric field.


We need to know mechanism and the source from where we might get energy.


Cheers,
Pix

Thanks all of you, you guys are cool with your work / research / academic / life , all of it ;)

i wonder when will people stop posting non working / dummy schemas   :-X

Regards

I proved that free oscillations in the Tesla coil are possible and there is more energy.
The problem is that the oscillations themselves do nothing. To talk about growth, we must have a load, and then there is no profit.
Is this a true statement? NO because there is a profit! There is not enough magnetic field in a Tesla coil! and what is needed..?

Hi everyone,
Nice to see some old guys here again.
Not much changed in the sentiment i guess... somebody still have there Ruslan/ Akula setup connected and testing?

I ve bin busy lately with it, startedbto read some old Ruslan explanations.
I see Dogeone giving some possible explanation on the m.o.

My take on it;
In general i think its radiowave technology combined with some Tesla sauce.
There has to be a standing wave situation i  the grenade and all coils need to be sychronised in order to avoid chaotic wave disturbing.
So wirelength regarding 1/4 wave in grenade and tesla coil are fundamentals.
Grenade resonance frequency depends on winding order,.. ground wire needs to be adjusted to maintain 1/4 wave situation. Kacher needs to run on this frequency..
I ve spend lots of time creating a grenade with 37.5meter wire and having a 2.0Mhz resonance frequency.. This is called double resonance,  In the following vid you can see it has two resonance frequency 2.0 and 4.0Mhz..
https://youtu.be/VsntCnwuEOo

The tesla combination (kacher) is i  my opinion the secret... some unipolair puls is needed in order to inject energy into the grenade coil... not creating magnetic field but displacement current.
This part is still an open book... I creared many kacher puls boards but couldn't get the 'sharp spikes' functioning.
Maybe someone has the solution.
So I hope there are some serious people here who want to join.

Also I am using PLL circuits for inductor and kacher... resonance stability is very important... this PLL story I learned from Lost bro...back in the days..... I  still appreciate his effort in giving me the knowledge I ve learned from him.

I still do believe this setup is real, it only needs perfect assembly and operate in stable manner.

Greetings
Apecore

.

Quote from: apecore on March 09, 2023, 04:39:59 PM
Hi everyone,
Nice to see some old guys here again.

I see Dogeone giving some possible explanation on the m.o.

Hey, hey apecore!

Good to see you around again too.

Yes, after turning over every rock small enough for me to lift, my gut
tells me it's all about timing.  I think time is some kind of artifact from
a third field force.  W.B. Smith referred to it as the Tempic Field.  Another
fellow called it a chrono field, same thing I suppose.  It just seems to
me if we can manipulate the local magnetic and electric fields, why not
the local tempic field.  With the right mechanism, we should be able to
charge a capacitor faster than it would discharge having the same
resistance in the line.  Once we can do this, Katie bar the door.

Being still in the discovery phase of the search, I do look at all these
energy devices trying to spot patterns that look like they may be
somehow manipulating the tempic field.  We all know 100% of these
devices can't all function as claimed, but if 5% of them do, it's worth
picking them apart looking for something similar in them that would
be at the heart of making them operate with an energy gain.

Right now I'm pretty focused on parametric resonance.  Even Wikipedia
accepts this phenomena as having the potential for energy gain, so
it's probably a genuine technique to consider.  And it's most definitely
related to timing.  When applied to a mechanical system, it's far easier
to visualize and comprehend.  With an electrical system, not so much.
For an electrical system, there are so many variables you have to keep
track of, it's like herding cats.  Even so, it still seems possible once you
get a handle on all the dependencies.  That's where I'm at for the
moment, trying to figure out what influences what.  If I can do that,
I should be able to pack it all into a spreadsheet and start plugging
values in.  When all the blanks are filled in, then it's a matter of
seeing if it is still physically possible to find suitable components to
fill those roles.

Parametric resonance, sounds good to me.

Caps and inductors thats the lego stones we have to use.
Don't forget electricity doesn't move inside the wire but outside.
This is why engineers have al kinds of problems with designing circuitboards.

Quote from: apecore on March 10, 2023, 03:20:44 AM
Don't forget electricity doesn't move inside the wire but outside.
This is why engineers have al kinds of problems with designing circuitboards.

And only recently have engineers begun to look at every wire as
a transmission line with its inherent capacitance and inductance
as well as wave reflections when the ends have different impedances.

With the hot pin of the kacher or TT, in my opinion, no one worked except me.
You might to rectify high voltage, might to modulate.

Another way to rectify HV

Quote from: pix on March 10, 2023, 06:00:11 AM
Another way to rectify HV

Unless you have some extreme current, these (https://www.amazon.com/dp/B0BRXYZLWZ/) work just fine.

No, it's more interesting with an electron lamp.
You can control the lamp on a grid or cathode, modulate HV, get all sorts of interesting things. ;)

This document may be helpful to you:
__  __ ___ ____
The film, and the scheme to it, (from  Bunk ::)) - moderation does not allow me to post here!
It must be so!..
It must be right!..
In that case, don't expect my posts in this forum!
Moderation does not allow you to show you the Telegram channel from Bunk
...It must be so!

Quote from: Boja on March 15, 2023, 08:17:29 AM
This document may be helpful to you:
__  __ ___ ____
The film, and the scheme to it, (from  Bunk ::)) - moderation does not allow me to post here!
It must be so!..
It must be right!..
In that case, don't expect my posts in this forum!
Moderation does not allow you to show you the Telegram channel from Bunk
...It must be so!

just write the telegram channel name or post link.
forum allows everything with no restrictions.

the image you posted ,we have seen video of it in old days, anyhow here's the link
https://youtu.be/Dpi__5ugbms?t=84

post the partial circuit which you got and which you claim is working for you.

Regards

Quote from: worldcup on March 18, 2023, 02:38:16 AM
just write the telegram channel name or post link.

post the partial circuit which you got and which you claim is working for you.

Sounds a little authoritative there worldcup.   >:(

Boja,

I think what he meant to say is:

Please

and

Quote from: Boja on March 15, 2023, 08:17:29 AM
This document may be helpful to you:

Thank you so much.  A nice, simple nano pulser.  I like it.

?

https://www.scribd.com/user/7495206/beboszek3423

Most builders are stucked, reason being that of interaction and effect. Tesla don't add up even after synchronized arrangements. I believe the system has multiple variations and all be gotten right. There is actually no room for mediocrity in this build, one most know what he is doing.
It just that the system with all the errors that we make is very forgiving otherwise most of us would pack up earlier than expected while trying to build. Most especially when you consider amount invested on procedurement and replacement of burnt components.

I  wish to encourage us to try and investigate faraday's law using Fleming' right hand rule. Simply put use Fleming right hand rule to investigate faraday's law. This might be for you if you have come to a level of this build.

Maxolous

You are most correct in regards to precision.  We are working on the
ragged edges of stability and impedances.  What we would normally
consider a "slight adjustment" turns into an enormous deviation with
this device and puts many off-the-shelf components well outside their
rated specifications.

https://en.wikipedia.org/wiki/Fleming%27s_right-hand_rule
Very interesting Maxolous.  In order to comprehend the phase
relationship, first you have to know which way the current moves.
What is not clear to me is the virtual "motion of the conductor
relative to the magnetic field".  Have to think about that some
more.

Quote from: Dog-One on April 21, 2023, 04:02:41 PM
Have to think about that some
more.

That will be tantamount to the right step in right direction!!!!

Maxolous

Quote from: maxolous on April 21, 2023, 04:42:05 PM
That will be tantamount to the right step in right direction!!!!

Good to know.

So if I continue to ask the right questions, will the solution be
found standing directly ahead of me?

https://www.pasco.com/products/guides/right-hand-rule#:~:text=The%20right%20hand%20rule%20states,the%20the%20resulting%20magnetic%20force

Quote from: maxolous on April 21, 2023, 11:37:21 PM
https://www.pasco.com/products/guides/right-hand-rule#:~:text=The%20right%20hand%20rule%20states,the%20the%20resulting%20magnetic%20force

maxolous, Thanks for that, now that is interesting.

Sil

Quote from: AlienGrey on April 22, 2023, 02:17:22 AM
maxolous, Thanks for that, now that is interesting.

Sil

AG,
Most builders doesn't give attention to small things. And such can fail someone. They see the system as a sum of the whole and never analyses it in modules. Consequently, current riot in the system they still can't phantom it.

The originator had something in mind, it is good to follow his mind.

Quote from: Boja on March 15, 2023, 08:17:29 AM
This document may be helpful to you:
__  __ ___ ____
The film, and the scheme to it, (from  Bunk ::)) - moderation does not allow me to post here!
It must be so!..
It must be right!..
In that case, don't expect my posts in this forum!
Moderation does not allow you to show you the Telegram channel from Bunk
...It must be so!

This problem it's true there is a problem with some complainants in this 'site' I my self have been kicked off for mearly pointing of asking questions to so called gurues trying to clear contradictions.
Another killer is finding valuable vids on you tube and pointing to them on here  you will find in most cases the youtube video posting is no more, strange that.

What to do ?  ;D :-X

Yeah! here are some standing wave creations from you tube (he isnt showing everything.
Notice the fixed distance between each wave, it must be set in hard ware.

::)

https://www.mediafire.com/file/vb68b0cf7xy9j95/iron+skeptics.mp4/file

 ::)

https://www.mediafire.com/file/yy07rirqyzcvhhn/cable+heart!;+cable+soul!.mp4/file

 ::) ;)

https://www.mediafire.com/file/8y6907kmls2d97l/Radiant+from+boonk.wmv/file

Well Bunk,
Do you remind those pictures below?
Your bull shit disinformation has a wide spectrum.
You post videos with Tesla coil principle, then you post about water molecules and finally transmutation of atoms  ;D
бунк - YouTube (https://www.youtube.com/watch?v=wClnOaWio0w)


And the very beginning of Bunk show:
МOHCTP - YouTube (https://www.youtube.com/watch?v=12ODTuoDWjc)