Youtube is really behaving annoying, now I have deleted all inconsistent shorts Remix Videos and now I still have to wait until September 13th before I can register again for the Youtube Partner Program...
I already have tried to chat with them 3 times, but no mercy...
and then it could wait another 1 month before they will decide, if I can come back into the monetization program...they're really going nuts...
Then the summer is over and I have earned nothing anymore....
After all, I've been involved since 2007 with Youtube....
First they encourage you to do a lot of remixes and shorts and then they cancel you the monetization....just because I had 2 gaps in my teeth and was a bit camera shy... ;( :'( :'( :'(
German translation:
Youtube nervt Echt ab, jetzt habe ich alle unstimmigen Shorts gelöscht und nun soll ich noch bis zum 13. September warten, bis ich mich wieder zum Youtube PartnerProgramm anmelden kann...
und dann kann es nochmal 1 Monat dauern, ob ich wieder zugelassen werde, ins Monetarisierungsprogramm reinzukommen...Die spinnen voll ab...
Dann ist der Sommer vorbei und ich habe nichts mehr verdient....
Ich bin immerhin schon seit 2007 mit dabei...
Erst stiften die einen an, viele Remixes und Shorts zu machen und dann kündigen Sie einem damit die Monetarisierung....nur weil ich 2 Zahhnlücken hatte und damit ein bischen Kamerascheu war... ;( :'( :'( :'(
Perhaps there can be strength in numbers?
If very polite request can be made or submitted to
an administrator contact there ?
Your 30 year efforts to green up the planet should account for ?
Very horrible to read this delayed response on your account !
Perhaps a mailing to open source community membership ( even LENR community?)
??
Respectfully
Chet K
Another forum I belong to has a tech section. The admin of that tech section has also had his YouTube videos demonitized. To avoid political discussion I won't comment why I think this is happening.
Carroll
Does anybody of you know a person , that works at Youtube that might help with thedemonetisation issue ?
They said in the online chat I had made too many Shorts videos with no real added content...
Now I deleted all these interesting Shorts videos , where I also posted the Original Video's creator link, but now I should Wait for 90 days, before I can reapply for monetisation....
It was my only income and it was lower than 100 US$ per month.... ;( :'( :'( :'(
Many thanks.
Regards, Stefan.
Stefan
How can we establish a revenue stream independent of these groups who play games with your life ?
Honestly the income you mentioned needs improvement regardless...
How to do ?
Also how to be independent of "helpful " persons and keep "your" mission statement
Top priority !
Most sincere members are here for open source FE
And will surely try to help !
Quote from: hartiberlin on July 04, 2023, 03:57:47 PM
Does anybody of you know a person , that works at Youtube that might help with thedemonetisation issue ?
It was my only income and it was lower than 100 US$ per month.... ;( :'( :'( :'(
Many thanks.
Regards, Stefan.
Good time Stefan!
Only the creation of a new channel, which is possible to monetize for some time, before blocking. The basis of monetization on YouTube, is the desire of investors to "monetize", to place ads in the videos of the channel. The administration YouTube, is easier to remove from monetization than to have problems with investors or find you an advertiser. You can make a channel "recipes how to make coffee" and for three reels about coffee, insert one on OverUnity.
Blatantly fake "free energy device" commercials flourish, where the operator "makes a mini-generator out of shit and sticks and lights a light bulb to good music. Investors are happy to invest advertising in these channels. Perhaps supporting the formation of an opinion about the impossibility of OverUnity devices.
Unfortunately, the main audience of YouTube, are those who are hungry for "bread and circuses", entertainment content. Those who think, a very small percentage, those who think - do not buy the ads.
Sincerely, Serge Rakarskiy
Yes,on Youtube it seems there are mostly only dumb users, that like to seefun and prank videos... lol.. ;(( :'( :'( :'(
And the good videos are shadow banned now...
:'( :'( :'(
Regards, Stefan.
Hi Stefan,
if possible, tell me how I, on this forum, open my personal and independent topic on free energy!??....
Mikhail Trofimov - (bunk)
Regards
Quote from: Fabon on July 05, 2023, 10:15:47 AM
Hi Stefan,
if possible, tell me how I, on this forum, open my personal and independent topic on free energy!??....
Mikhail Trofimov - (bunk)
Regards
There is no any patent on this name, as he claims he have one.
Cheers,
Pix
Quote from: pix on July 05, 2023, 10:57:39 AM
There is no any patent on this name, as he claims he have one.
Cheers,
Pix
You are absolutely right
He claims to have American Patent
Wesley
There is a UK patent with that name : https://patents.google.com/patent/GB1216966A/en?inventor=Trofimov&assignee=Mikhail&oq=Mikhail+Trofimov
But it's 54 years old and expired... and hardly relevant I suspect.
D2
stivep, pix,
OK! I like your comments, time will put everything in its place
Quote from: dsquared18 on July 05, 2023, 11:38:37 AM
There is a UK patent with that name : https://patents.google.com/patent/GB1216966A/en?inventor=Trofimov&assignee=Mikhail&oq=Mikhail+Trofimov (https://patents.google.com/patent/GB1216966A/en?inventor=Trofimov&assignee=Mikhail&oq=Mikhail+Trofimov)
But it's 54 years old and expired... and hardly relevant I suspect.
D2
Not any patent in the field Bunk is claiming.
There are plenty of patents on "Trofimov" name, all in not relevant fields.
So my question is: when this guy is telling the truth?
Cheers,
Pix
Quote from: pix on July 05, 2023, 11:47:22 AM
Not any patent in the field Bunk is claiming.
There are plenty of patents on "Trofimov" name, all in not relevant fields.
So my question is: when this guy is telling the truth?
Cheers,
Pix
Quote from: Fabon on June 20, 2023, 02:26:55 AM
//
I have already received a patent in America for a free energy device! And I do not intend to hammer it into ignoramuses and various fools! And I just don't have time for that!
On this forum, 97% of the usual morons who have a lot does not fit in their heads! I'm talking about the simplest things!
So dear Fabon aka Bunk where is your American patent?
Wesley
stivep,
My answer is higher for you friends!
You banned me in your thread, but you want too much!....
Regards
Stefan,
OK!
Everything, as you told me in the subject - Kapanadze FE!!!
Regards
Hi Mikhail,
Do you have a patent? If so, what is its number and where is it held?
Best Regards,
D2
Quote from: Fabon on July 05, 2023, 11:55:40 AM
stivep,
My answer is higher for you friends!
You banned me in your thread, but you want too much!....
Regards
IT IS NOT ME WHO WANT TO MUCH.
IT IS OFFICIAL
PATENT YOU SAY YOU HAVE GOT
FROM AMERICAN PATENT OFFICE.
you said it here: https://overunity.com/19502/my-new-trouble-with-my-youtube-channel-overunitydotcom/msg579782/#msg579782 (https://overunity.com/19502/my-new-trouble-with-my-youtube-channel-overunitydotcom/msg579782/#msg579782)
SUCH DATA IS PUBLICALLY ACCESSIBLE TO EVERYONE INTERESTED.
So please explain to me why you think this is to much?
why your patent doesn't exist in the search of patents under listed by you name?
We are now not in moderated by me part of forum so feel free to respond to the audience.
Wesley
Quote from: dsquared18 on July 05, 2023, 12:12:05 PM
Hi Mikhail,
Do you have a patent? If so, what is its number and where is it held?
Best Regards,
D2
The number will be specifically indicated by me, when opening my topic, in my posts.
Sounds good.
D2
Quote from: Fabon on July 05, 2023, 12:14:01 PM
I have already received a patent in America for a free energy device! And I do not intend to hammer it into ignoramuses and various fools!
And I just don't have time for that!
On this forum, 97% of the usual morons who have a lot does not fit in their heads!
I'm talking about the simplest things!
The number will be specifically indicated by me, when opening my topic, in my posts.
Thank you for sharing this image, Bunk.
Quote5 4
(54) METHOD FOR ELECTRICAL ENERGY GENERATION ITS
(57) Abstract:
FIELD: electrical power engineering.
SUBSTANCE: method for electrical energy generation consists in that a pulse generator generates current pulses in primary winding of a Tesla transformer, inducing a high voltage in secondary winding connected to a spherical capacitor, ionizing air and forming a feedback voltage in tertiary winding, which is fed to the pulse generator connected to primary winding through a rectifier and a positive feedback circuit (PFC). In this case, tertiary winding consists of two series-connected sections wound in opposite directions, and it is connected to a serial LC circuit
C 1
C 1
5 4
formed by the capacitor and primary winding of a matching transformer, secondary winding of which feeds the pulse generator through a rectifier bridge. Moreover, the pulse generator is controlled by an amplitude-pulse modulator. A two-resonant electrical energy generator, consisting of a pulse generator, a Tesla transformer, a serial LC circuit, a matching transformer and a rectifier bridge, is also claimed. EFFECT: increase in the reliability and increase in the efficiency of the electrical energy generator.
4 cl, 2 dwg
Is this the exact verbiage used that was granted a patent?
As of right now, no publicly available patent exists online with such verbiage.
The closest patent I could find (from 2010) with remotely similar verbiage is
RU2474031C2: https://patents.google.com/patent/RU2474031C2/en
Is it this one?: https://patentimages.storage.googleapis.com/f5/d1/48/e35e426c4d454c/RU2771054C1.pdf
D2
Please see attached.
RU2771054C1 Samsonov Vladimir Dimitrievich
Cheers,
Pix
Quote from: Fabon on July 05, 2023, 12:14:01 PM
The number will be specifically indicated by me, when opening my topic, in my posts.
Note to all
Please allow time as per Fabon request
This topic is for helping Stefan with his YouTube issue ( and how to help his revenue stream)
Quote from: dsquared18 on July 05, 2023, 12:44:53 PM
Is it this one?: https://patentimages.storage.googleapis.com/f5/d1/48/e35e426c4d454c/RU2771054C1.pdf
D2
Nice find D
2Looks like this is indeed Bunk's patent.
QuoteFIELD: electrical power engineering.SUBSTANCE: method for electrical energy generation consists in that a pulse generator generates current pulses in primary winding of a Tesla transformer, inducing a high voltage in secondary winding connected to a spherical capacitor, ionizing air and forming a feedback voltage in tertiary winding, which is fed to the pulse generator connected to primary winding through a rectifier and a positive feedback circuit (PFC). In this case, tertiary winding consists of two series-connected sections wound in opposite directions, and it is connected to a serial LC circuit formed by the capacitor and primary winding of a matching transformer, secondary winding of which feeds the pulse generator through a rectifier bridge. Moreover, the pulse generator is controlled by an amplitude-pulse modulator. A two-resonant electrical energy generator, consisting of a pulse generator, a Tesla transformer, a serial LC circuit, a matching transformer and a rectifier bridge, is also claimed.EFFECT: increase in the reliability and increase in the efficiency of the electrical energy generator.4 cl, 2 dwg
The invention relates to the electric power industry and can be used in power supply systems of various industries and in housing and communal services.
Various methods of generating electrical energy are widely known: electrochemical, thermoelectric, magnetoelectric, piezoelectric, photoelectric, using nuclear energy and other alternative methods. Common problems for them are the low efficiency of converting initial energy into electrical energy, as well as environmental pollution during the disposal of used natural resources. In this case, for example, to create and maintain an electromagnetic field in generators or DC motors, for the operation of thermoelectric generators used as current sources, the consumption of significant amounts of energy carriers is required. Current sources that convert the energy of solar radiation have a low efficiency and can be effectively used only in areas with a large number of sunny days per year. In addition, a number of sources of electricity in the process of operation cause significant harm to the environment (thermal and hydroelectric power plants).
A device and a method for amplifying electrical signals [1] are known, containing an alternating voltage source connected through a capacitor to the primary winding of a Tesla transformer, a secondary high-voltage winding with a spherical capacitor, which creates a stream of polarized air molecules and water vapor (a stream of ions - charged particles), incoming into the high-voltage winding of the second Tesla transformer. This winding induces an electric current in its secondary, low voltage winding connected via a capacitor and a rectifier bridge to the load and to a positive feedback device (PFC) supplying the AC voltage source. Thus, the AC voltage source of the first Tesla transformer is fed through the PIC from the second Tesla transformer, which increases the efficiency of the device. All four LC circuits resonate at the same frequency.
The way to amplify this device is to amplify the electrical signal due to a parametric change in the capacitance of the resonant circuit, consisting of a high-voltage winding and a spherical capacitor. This amplifier can be considered a generator, since it has a low-current AC voltage source, a load, and a POS device. The disadvantage of this device is the difficulty of reducing four resonances to one frequency and the presence of two Tesla transformers.
An additional disadvantage of this method is the need to lift the spherical capacitors to a great height in order to obtain the atmospheric energy necessary for parametric amplification.
There is also known a method for utilizing radiant energy and a device for its implementation [2], containing an antenna for receiving the radiated energy of charged particles and a mechanical controller that connects this capacitor with a certain frequency and duty cycle to the primary winding of a matching transformer, to the secondary winding of which the load is connected.
The disadvantage of this device is the lack of an effective source of charged particles.
Closest to the proposed invention is a device for generating electrical energy [3], consisting of a source of electrical energy that feeds a current pulse generator, the output of which is connected to a storage capacitor and to a spark gap connected in series with the primary winding of a Tesla transformer, the secondary high-voltage winding of which is A capacitor connected in parallel forms a resonant circuit that supplies positive feedback (POS) through the diode to the storage capacitor, and the tertiary winding of which feeds the load through the rectifier bridge.
The disadvantage of the prototype is the difficulty of matching the high voltage of the secondary high-voltage winding of the Tesla transformer with the low resistance of the storage capacitor for pulsating current from the POS diode. Indeed, the voltage on the secondary winding must reach tens and hundreds of kilovolts to ionize the air. Such a voltage will lead to breakdown of the PIC diode and storage capacitor, which reduces the reliability of the prototype.
Another disadvantage is the generation of a wide spectrum of frequencies by the spark gap. Among the frequency spectrum there is always a frequency that will cause resonance in the secondary winding of the Tesla transformer, but the spectral density of the radiation is not high enough, which reduces the efficiency of the prototype.
The technical result of the claimed invention is to increase reliability by introducing a matching transformer into the POS circuit connected to the tertiary winding, consisting of two sections connected in series, wound in opposite directions
An additional technical result consists in increasing the efficiency due to the introduction of a modulator, the modulation frequency of which is in resonance with the LC circuit formed by the primary winding of the matching transformer and an additionally introduced capacitor.
The essence of the claimed invention is illustrated by the drawing in Fig. 1, where: 1 - pulse generator; 2 - amplitude-pulse modulator; 3 - primary winding, 4 - secondary winding, 5 - tertiary winding of the Tesla transformer; 6 - spherical capacitor, 7 - capacitor, 8 - matching transformer, 9 - rectifier bridge with a filtering capacitor and output to an external load, 10 - isolation diodes, 11 - voltage limiter, 12 - source of electrical energy, preferably battery, 13 - ground electrode.
It should be noted that the filter capacitor and the zener diode, which limits the PIC voltage, connected to the rectifier bridge 9 are not fundamentally important elements and do not determine the novelty of the invention, therefore, they are not mentioned in the following text. Those skilled in the art reading the application will see them in FIG. 1 and understand their purpose.
The essence of the claimed invention is achieved by a method of generating electrical energy based on excitation by a pulse generator 1 with a modulator 2 attached to it and a primary winding 3 of a Tesla transformer of waves of charged particles - air ions and water vapor (hereinafter referred to as "air ions") - around the secondary high-voltage winding 4, moreover, the pulse frequency of this generator fg (Fig. 2, a) is tuned into resonance with the natural frequency f0 of the circuit, consisting of a secondary winding 4 and a spherical capacitor 6 connected to its upper output. These waves are captured by the tertiary winding 5 and transmitted to the LC circuit formed by capacitor 7 and the primary winding of the matching transformer 8. The natural frequency of this series L8C7 circuit is tuned to resonance with the modulation frequency fm (Fig. 2, b), which makes it possible to transfer the energy of the ion waves into the energy of the electric current circulating in the LC circuit with maximum efficiency. The secondary winding of the matching transformer 8 through the rectifier bridge 9 and through the isolating diode 10 forms a positive feedback circuit (POS), which feeds the pulse generator 1 and the modulator 2. The frequency fg of the generator 1 is tuned to resonance with the frequency f46 of the circuit formed by the secondary winding 4 of the Tesla transformer and a spherical capacitor 6, which increases the generation efficiency. The tertiary winding 5 consists of two series-connected sections wound in opposite directions, therefore, no EMF with a frequency fg is induced in it, but it receives ion waves with a frequency fm. Relatively slow waves of ions (Fig. 2, c) with a frequency hm cause the movement of electrons in the tertiary winding 5. Therefore, this winding is a receiving antenna, similar to the antenna in the second analogue. The moving electrons form a quasi-sinusoidal current (Fig. 2, d) in the secondary winding of the matching transformer 8. The resulting electron flow is enhanced by resonance at a frequency fm in the series-connected capacitor 7 and the primary winding of the transformer 8, which further increases the efficiency. The matching transformer 8 converts the output resonant current into an output voltage supplying an external load and creating a PIC voltage, preferably 24 V, via an isolating diode 10, supplying the pulse generator and modulator. The second separating diode 11, connected in series with the power source (battery), paired with another separating diode 10, protects the power source and the PIC circuit from mutual shunting according to the "Logic OR" scheme. It should be added that the lower end of the secondary winding of the Tesla transformer is connected to the ground electrode 13, which allows it, together with the spherical capacitor 6 connected to the upper end, to effectively ionize the air.
Thus, the matching transformer increases the reliability of the POS circuit and the entire generator as a whole relative to the prototype due to the transfer of this circuit from the high-voltage winding of the Tesla transformer to the low-voltage one. The presence of a second resonance between the modulation frequency and the frequency of the series LC circuit formed by the secondary winding of the matching transformer and additionally introduced capacitor increases the efficiency relative to the prototype. It should be recalled that there is also the aforementioned first resonance, caused by the equality of the frequency of the pulse generator and the natural frequency of the high-voltage winding connected to the spherical capacitor. Thus, the presence of two resonances relative to analogues and the prototype gives reason to call this generator as a "Two-resonance generator".
The above information confirms the possibility of implementing the claimed invention, achieving the specified technical result and solving the problem.
Thus, the present invention meets the criterion of "state of the art" and "novelty".
Information sources:
1. RF patent No. 2644119, IPC classes 7: H03F 3/2173 H03F 3/20 H03F 1/02
2. US patent No. 685958.
3. RF patent No. 2261521, IPC classes 7: H03K 3/53
Implementation example
1. Initial data.
A Tesla transformer is vertically installed on a platform made of insulating material with dimensions of 1.0 × 1.0 m. The transformer is made on a cylindrical frame made of PVC pipes with a diameter of 50 mm. Pipe height 600 mm. A secondary high-voltage winding is placed on the frame, wound in one layer with enameled wire PETV-2 with a diameter of 0.4 mm and a number of turns 1160. The length of the winding is 465 mm. The length of the winding wire is L=182 m. Over the single-layer secondary winding, the primary winding with the number of turns n1=3 and a diameter of 70 mm is wound with a PV-3 installation wire with a cross section of 2.5 mm2. The secondary winding is located coaxially with the primary at a height of 75 mm from its lower end. The tertiary winding is wound with PV-3 wire with a cross section of 4 mm2 over the secondary and has 50+50 turns. The matching transformer is made on two ferrite rings M2500NMS 80 * 50 * 12 mm folded together with the number of turns: 3 turns and 60 turns. Capacitor type SVV-81 with a capacity of 8.2 nF, 2000 Volts, 94 pieces connected in parallel. Diode bridge of four fast diodes STTH15R06FP.
2. Reduction of the generation frequency and the length of the secondary winding as a transmitting antenna.
Figure 00000001, где λ - длина волны. Для выполнения этого условия вторичную обмотку нужно возбуждать напряжением с от генератора с частотойThe secondary winding is a transmitting antenna, so the length of its wire L must be equal toFigure 00000001 , where λ is the wavelength. To fulfill this condition, the secondary winding must be excited with a voltage c from a generator with a frequency
fg=C/4L=300*(10*6)/4*182.1=412 kHz,
where С=300000 km/sec is the speed of light.
For accurate information, the primary winding is powered by an oscillator assembled on a 2SC5200N transistor according to a scheme known as the "Brovin Kacher".
Powering the Tesla transformer from a self-oscillator makes it possible to determine the resonant frequency f46 of a complex resonant system. After turning on the oscillator, it turned out that its frequency is equal to:
- 820 kHz without spherical capacitor,
- 640 kHz after installing and connecting a spherical capacitor made as a toroid with a diameter of 300 mm from a ventilation pipe with a diameter of 100 mm made of aluminum foil,
- 420 kHz after installing two copper tubes 0.8 m long over the toroid.
Thus, the natural frequency f46 = 420 kHz of the Tesla transformer was brought to wave resonance with the length of the wire of the secondary winding with sufficient accuracy.
3. Execution of the pulse generator and modulator
For the final adjustment, the autogenerator was replaced by a half-bridge inverter, the load of which is the primary winding of the Tesla transformer. The inverter is made on two IRFP 260 transistors controlled by the IR2153D driver. The modulator is made on the NE55 timer. The modulation frequency is chosen to be 0.1 of the resonant frequency of the secondary winding of the Tesla transformer.
Quote from: ramset on July 05, 2023, 12:48:41 PM
Note to all
Please allow time as per Fabon request
This topic is for helping Stefan with his YouTube issue ( and how to help his revenue stream)
Thanks for the heads-up ramset... will wait patiently... :D
D
2
reg: BUNK aka Fabon.
Text on that patent is the same but:
The name of patentee is different.
It is not a patent but just an application
(21)(22) Заявка: 2021127489, 20.09.2021 (24) Дата начала отсчета срока действия патента: 20.09.2021 Самсонов Григорий Владимирович (RU) (73) Патентообладатель(и): Самсонов Владимир Дмитриевич (RU) Дата регистрации: 25.04.2022 (56) Список документов, цитированных в отчете о поиске: RU 2261521 C2, 27.09.2005. RU Приоритет(ы): (22) Дата подачи заявки: 20.09.2021 2645222 C2, 19.02.2018. RU 2639948 C1, 25.12.2017. CN 109617539 A, 12.04.2019. (45) Опубликовано: 25.04.2022 Бюл. № 12 Адрес для переписки: 141008, Московская обл., г. Мытищи, ул. Колпакова, 38, корп. 2, кв. 106, Самсонову В.Д.
translation:
(21) (22) Application 2021127489, 20.09.2021
(24) Patent validity start date 20.09.2021 Samsonov Grigory Vladimirovich (RU)
(73) Patent holder(s) Samsonov Vladimir Dmitrievich (RU)
Registration date 25.04.2022 (56) List of documents cited in the search report RU 2261521 C2, 27.09.2005. RU
Priority(s) (22) Application date 20.09.2021 2645222 C2, 19.02.2018.
RU 2639948 C1, 25.12.2017. CN 109617539 A, 12.04.2019.
(45) Published on 25.04.2022 Bulletin.
No. 12 Address for correspondence 141008,
Moscow region, Mytishchi, st. Kolpakov, 38, korp. 2, apt. 106, Samsonov V.D.
so my question dear Bunk aka Fabon is
is your true name : Mikhail Trofimov (BUNK) as you posted
or it is : Самсонов Владимир Дмитриевич
translation: Samsonov Vladimir Dimitrievich or Samsonov Grigory Vladimirovich the names on the Russian patent application:
https://patents.google.com/patent/RU2474031C2/en (https://patents.google.com/patent/RU2474031C2/en)
Do you have dear Fabon American patent as you stated?
And what is the number of it.
Wesley
How strange, you mister,
after all,
you also ask - me your questions ...
Name, I can choose any by the way!
Nothing wrong with that - no!
You can only be judged about me subjectively
because no one knows me personally.
Where I lie, or where I tell the truth, there can only be purely subjective opinions
Subjective opinion does not reflect reality
These are just your superficial fantasies about my person.
Regards
Interesting patent: https://www.fips.ru/cdfi/fips.dll/ru?ty=29&docid=2771054
The author is even more interesting:
1) Address for correspondence: 141008, Moscow region, Mytishchi, Kolpakov street, 38, Bldg. 2, sq. 106, Samsonov VD.
2) https://www.rusprofile.ru/ip/308502926000014 his page as: Type of business - Individual entrepreneur
My summary as the subject of the invention, rather to secure the topology, then pester for priority. So it's like this. Judging by the activities, supplying various educational institutions in Moscow food products. The patent is rather a record of the information provided to him, in the calculation of something.
Well, well, we are waiting for more discoveries.
I am amazed at the morons that have posted in this thread. Stefan is struggling to keep this forum alive and started this thread to ask for help. Now it has been hijacked by others arguing over something that belongs in a different thread. With people like that on this forum maybe it deserves to die.
Please grow up people. It is not that hard to start your own thread to discuss these kinds of things.
With no respect for the hijackers,
Carroll
Hi Stefan. I see a lot of YouTube people using Patreon as their subscription service. It's separate from YouTube as I understand it and allows people to sign up so that they can give funds automatically on a monthly basis. Just put the Patreon info in the YouTube description section of your videos for people to sign up to and add the Patreon info in this thread as well. Then you can still receive funds from the Patreon regardless of if YouTube messes with you.
whatever, back in the day I also made about $1000 from the platform but now it's not the same )
Quote from: MagnaProp on July 05, 2023, 04:42:42 PM
Hi Stefan. I see a lot of YouTube people using Patreon as their subscription service. It's separate from YouTube as I understand it and allows people to sign up so that they can give funds automatically on a monthly basis. Just put the Patreon info in the YouTube description section of your videos for people to sign up to and add the Patreon info in this thread as well. Then you can still receive funds from the Patreon regardless of if YouTube messes with you.
Things are even worse on this resource for people who want to watch Free Energy videos or materials.
Quote from: MagnaProp on July 05, 2023, 04:42:42 PM
Hi Stefan. I see a lot of YouTube people using Patreon as their subscription service. It's separate from YouTube as I understand it and allows people to sign up so that they can give funds automatically on a monthly basis. Just put the Patreon info in the YouTube description section of your videos for people to sign up to and add the Patreon info in this thread as well. Then you can still receive funds from the Patreon regardless of if YouTube messes with you.
Okay, here is my Patreon account, so if anybody wants to help, you are very welcome.
https://www.patreon.com/overunitydotcom (https://www.patreon.com/overunitydotcom)
Many many thanks.
Best regards, Stefan.
Here is a new Live Video I just recorded, so you can see my status.
Hope you enjoy it, as there are very nice upcoming Convention events also.
https://www.youtube.com/watch?v=SMzAYSLz-rg
Please also read the description of this video, cause I forgot to speak about a few things in the video.
Many thanks.
Regards, Stefan.