TPU One Ring Flux Drive
What dues everyone think about this?
http://www.youtube.com/watch?v=-G8xfuZxOfg (http://www.youtube.com/watch?v=-G8xfuZxOfg)
http://www.youtube.com/watch?v=0cMobl5bIHE (http://www.youtube.com/watch?v=0cMobl5bIHE)
Seems like a very low power device, 4.5 volts from 3 volts? Interesting effect though.
Acerzw
In the video it shows energy collected by a pickup from the flux of a magnet returning to its point of equilibrium after an electric current is used.
If you can distort the magnetic field using electricity, of 3 permanent magnets situated close engulf together so the fields interact sufficiently.
It might be possible to get a resonance of these distorting magnetic fluxes and achieve sum spikes in the resonance or discord and tap this with a pickup?
In relation to Hungarian FREE ENERGY from Wave-Fields as their amplitudes will add together and because this is a magnetic filed the waves can overlap.
http://www.youtube.com/watch?v=vCHPo3EA7oE
Has anyone don experiment like the one in the video but with overlapping magnetic flux felid distorted with differing frequency of electricity
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.headtribe.com%2F3flux.jpg&hash=aa14643c50b8796e5e378e8e1ee8a3a7735c3733)
You could stretch some rubber over the above experiment and add some
Ferro fluid liquid and see if any vortices are created in the resonances.
http://www.youtube.com/watch?v=sY6z2hLgYuY
http://www.youtube.com/watch?v=OsW8zctD7CM
http://www.youtube.com/watch?v=aa5NIN9T-Tg
Nice videos especially the second, very weird... and the first one you posted is a bit scary too...
Acerzw
Would love to see what Ferro fluid liquid would look like on top of the above experiment as the frequencies resonated the magnetic flux.
Hi all,
I'm the guy who made the Flux Drive, and I can tell you that I have achieved incredible results by experimenting with this, and I encourage as many people as possible to play with this concept. If anyone has questions, I'll be lurking around here.
I have some questions-
An issue I'm facing with my latest model, is that the batteries are being drained rapidly, as the coil used to move the flux is basically shorting out the battery when engaged. Any way of reducing this effect? I don't know too much about resistance and the resistors I've tried have fried!
What capacitors might be best for a device like this? the output fluctuates too much now.
Also, I am now generating twice the power it takes to run the coil and timer, but I don't know how to channel the output back to run the device.
If anyone can help...
Cool project. How much energy does it take to perturb the magnetic flux? Besides iron fillings, and ferrofluid there is also magnetic viewing film. It is a cheap green film and eBay has it too.
http://www.rare-earth-magnets.com/detail-ID-16.html
Quote from: singerxyz on September 21, 2007, 11:41:40 PM
Hi all,
I'm the guy who made the Flux Drive, and I can tell you that I have achieved incredible results by experimenting with this, and I encourage as many people as possible to play with this concept. If anyone has questions, I'll be lurking around here.
I have some questions-
An issue I'm facing with my latest model, is that the batteries are being drained rapidly, as the coil used to move the flux is basically shorting out the battery when engaged. Any way of reducing this effect? I don't know too much about resistance and the resistors I've tried have fried!
What capacitors might be best for a device like this? the output fluctuates too much now.
Also, I am now generating twice the power it takes to run the coil and timer, but I don't know how to channel the output back to run the device.
If anyone can help...
You might want to consider trying to pulse your control wire(the coil you use to move the flux) at 7.8Hz, I am willing to bet that you will see a much greater output...
Please see this for an explanation: http://www.overunity.com/index.php/topic,2814.0.html
Ah yes Shuman's resonance! Thanks for the video link, too.
Question: Are there portable function generators? Or would you know a way to create something to pulse it? As it is now, I'm using a 555 timer circuit that controls a plain old on/off relay type switch, but it only goes down to about 4 times/sec.
paulshroom,Ã, nice video links, thanks for posting.Ã, It should be said that what happens in acoustics, happens in electromagnetism as well, but we can't visualize it as well, and the frequency is alot higher due to the higher speed of EM waves compared to acoustic energy.Ã, Ã, The video showing the rotation in the center was quite interesting.
singerxyz,Ã, nice videos.Ã, I have a question.Ã, In your second video, you turn the knob of your insturment to check the amperage.Ã, However, I don't see you reconnecting the probes for an amperage measurement.Ã, Did I miss something, because you can't measure voltage and current through a load with the probes connected in just one spot.Ã, GettingÃ, a higher voltage then what's input is nothing special, getting more POWER out then input is a BIG BIG thingÃ, :)
EM
You're right, I didn't change input on my meter, as it seemed to register the same amps with a previous experiment, but I should have for the sake of legitimacy. I will change it and try again, and upload a short clip of my results.
Good looking out!
Bummer! You were correct, I was measuring milliamps. :'(
What I'm getting right now, is 50 VDC 12mA from 8 AA batteries.
What I still think this shows however, is that you can generate current by moving the flux in a magnet through a coil wrapped around it.
I still have alterations I've yet to try, but for the sake of scientific honesty, I'll modify my videos etc...
Thanks for your help and stay tuned!
Quote from: simonmagus on September 22, 2007, 12:38:19 AM
Cool project. How much energy does it take to perturb the magnetic flux? Besides iron fillings, and ferrofluid there is also magnetic viewing film. It is a cheap green film and eBay has it too.
http://www.rare-earth-magnets.com/detail-ID-16.html
Not much at all, I've done it with 2 AA batteries (3V)
Right now, I'm experimenting with different frequencies using a computer function generator and a small 25 watt amp. Low frequencies (60-70Hz) work best so far @ around 6-10 watts from the amp. Anything more than that is wasted (no difference)
I'm posting some interesting videos on Frequencies effecting flux on my youtube page
http://www.youtube.com/user/singerxyz
Question:
I don't know too much about coils, I do know that thinner wire=higher voltage. but what about amperage?
does thicker=higher amps?
Also, my thought in making this device was that it took a small coil to move the entire flux field of the magnet, so by wrapping a larger (longer) coil around the rest of the magnet I could move flux through a larger coil for the energy cost of charging just a small coil- and it works! But I am not seeing much in the way of amps.
Should I use the same gauge wire on both? Should I use Mobius coils? Any help? Here is a diagram of what I'm doing: (very crude- I'm no artist ;-)