Hi All,
again the old thread:
Lords of the Ring
was not accessable starting at page 170...
Hmm...
I checked now directly the database and did a repair function
on all tables and an optimize run over it via PhPMyAdmin
but this did not help.
So I splitted again the thread and the last postings in page170
were still not visible.
So I closed the old thread now deleted the new still not visible
thread and opened up this thread:
Lords of the Ring 2
So please continue to post here.
I hope the posters who had posted on page 170 can repost their postings
again over here, so they are not lost.
I don?t have much time right now to check deeper into,
what happened to the database, but all other
functions seems to run normal now.
If anybody has an idea, what still to check via PhPMyAdmin
again, please let me know.
Many thanks.
Regards, Stefan.
test posting, just ignore.
This is just a test, please ignore
DDS20 function generator 3 years on is still functioning well.
I added my own inverter board inside the case so I feed it with a +12v supply and thats it.
Still an occasional issue with the LCD display.
Rob
Rob
Sounds interesting !Can you share somemore?
Thanks
Chet
Hartiberlin, since you make improvements to this forum, would you like to consider to make some changes to this obnoxious technique where an advertisement appears and covers the text every time the cursor moves over the highlited words. What about the idea to let it appear on the left side of the screen, covering less important text, thus making it less frustrating and bringing the same or alike effect; my experience is, that most of the advertisements are ignored anyway.
So I come here to review the thread 'Lords of the Ring'. Lo and behold the STUFF HAS BEEN CHANGED! WTFFFFFFFFFFFFFFFFFFFFFFFF!!!!!!!!!!!!!!!!!!!!!
I am using this site as an introduction and training aid. WHAT I AM SUPPOSED TO DO NOW? DOES ANYBODY REALIZE THE NEGATIVE IMPLICATIONS OF THIS CHANGE/LOSS?
Hellohhhhhhhhhhhhhhhhhhhhhhhhhhhh! Is there a backup? Hellohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh?
Repost 170 pages? Where does this come from? Does anybody realize the loss?
Is there really a problem or have the advertisements taking over the cleaning?
Where are the sticky and locked threads?
Friggin toast! Who decides what is important! Frack! This was all valid information including the fights! I was including these attributes as an insight into the minds of inventors. I was just starting a new seminar and now the shits gone. What a FRIGGIN WASTE!
DONT CHANGE THINGS AND LEAVE YOUR HANDS OFF THE INFORMATION! HISTORY IS NOW GONE? HUGE PARTS OF US HAVE BEEN WIPED OUT!
The newbies saw adds. Does anybody know how many noobs come here to see? I am an instructor that has just lost his curriculum. GODDAMN IT!
I also used the ads to teach about marketing. IT IS/WAS ALL IMPORTANT. I guess my efforts were not important.
I used the history of the posts here from everybody to teach the patterns and mindsets.
This is the 3rd time this site has trashed quantitative, valid information!
Now it is no different from the barbarians burning the Alexandrian scrolls. BE VERY AWARE! GODDAMIT! Friggin incompetence. No backups? Just repost?
And everybody wonders why the TPU never got any where? How the fuck does anybody know what I got. Is this a prying ploy? Now wonder the oldheads left in disgust...
Go ahead and wipe it all out! We're screwed at the hands of tyrants and greed.
Go ahead and click to buy some useless piece of shit trinket then put it on a shelf. There is your overunity. You paid a price for trash and it lasts forever in one of your boxes, forever!!!!!!!!!!!!!!
I will show this example of mismanagement to show students the importance of valid work efforts and backups. I won't tell them not to use this site. They won't because of an engendered mistrust. Self revenge is the sourest of realization.
Giantkiller. My last post. Farquat! Far-kwat' To perform a useless task or to idle about.
Quote from: Qwert on November 08, 2010, 08:12:26 PM
Hartiberlin, since you make improvements to this forum, would you like to consider to make some changes to this obnoxious technique where an advertisement appears and covers the text every time the cursor moves over the highlited words. What about the idea to let it appear on the left side of the screen, covering less important text, thus making it less frustrating and bringing the same or alike effect; my experience is, that most of the advertisements are ignored anyway.
@GK @GK @GK
What @stefan said is that the main thread had to stop because of some problem with the thread. So he saved it, as-is, under Lord of the Rings and he opened this new thread called Lord of the Rings 2. Didn't you know. Just like video games, the best threads always have a 2nd coming. lol
http://www.overunity.com/index.php?topic=1872.msg21431#msg21431
Quote from: wattsup on November 09, 2010, 04:22:24 PM
@GK @GK @GK
Guys, you behave like unaware kids. There still exist equipment for recovering even deleted data. And Hartiberlin is aware of that, I guess? I am ready to contribute to get recovered this kind of data.
I mentioned this happened twice before and the repair was haphazard.
Amidst all the noise in all these threads there are nuggets of information to build complete units.
@gk,
Thanks for everything! keep up the good work. I can feel your disapointment wheather anyone else can or not.
I hope you do not let this discourage you. there are alot of us out here, that don't have your abilities that are counting on you! If there is anything i can do let me know.
keep up the good work,
love sam
ps: hope you have a REAL thanksgiving.
I am kind of late but thanks.
I will now spill the beans:
The circumference matches a 1/4 wave length of a frequency made of a harmonic from 2 frequencies. The harmonic is in relation to the outside environment! That is why SM didn't change frequencies but changes the length of the wires! Can you say guitar / amplifier feedback? Sine waves not square waves. You can thank BOLT for this.
At the 90d phase of the control of the clockwise circumferal return the control coils are pulsed again at the height of the magnetic field. An amplifying, pumping action is now in place. As the new field is impressed on the previous field there will now be new pressure cutting across the outer windings. This is 26x the speed of light per Podkletnov. Use an iron wire loop with the collector to accomodate an angular change in the flux collection. Remember the control windings are 90d perpendicular to the collector. The iron wire field will now cut the collector at a parallel.
If you want you can wire the end of the control wiring to the iron loop. The iron loop is open ended or closed(magamp). You can thank OTTO for this. Now the reason the iron loop with the collector needs to be horizontal is the planet flux passing over it is horizontal. The device bends the planet flux(weak field) down throught the center causing a vortex. Additive collection process. The flux must be bent. The clockwise direction is necessary in the northern hemisphere. Why? Same direction as draining water and the direction of the crown of your head. The collector in this position also reads the activity from the flux / planet like a directional antenna. This directional antenna is also involved in 'Effective Aperture'. You must read about that to comprehend. It is the same process that your ears perform.
Don Smith's device had slight problems at 2khz. SM used 5khz. Sm used a circumference of 4", 6", 18". The 15" didnt work.
I have pulsed a square wave into a ferrite toroid and gotten sine waves out.
Frequency #1: 35khz. Frequency #2: 6khz. Harmonic: 5.83hz
Or
Frequency #1: xxkhz. Frequency #2: xkhz. Harmonic of 7.83 Schuman resonance.
xx by circumference.
Anybody that has been involved in this for the last four years knows all the key points here.
Hope this opens eyes. There is still a puzzle in this description.
Merry Christmas, TPUers! You have 2 years till climax.
@GK
can you repost the the gold stactue pic of OSIRIS holding the ring ?
thank you
MERRY CHRISTMAS
IS ;)
ps: i cant seem to find it any where !
guess not ... eh!
o well far from my loss
ever wonder how it infact works .... :)
guess not eh!
OSIRIS
i use 3 fingers to time the divice and turn it off and on !
;) just ask captian kir
just my 10 cents
I have it somewhere.
That also looks like 15c.
Quote from: osiris on December 19, 2010, 11:55:47 AM
guess not ... eh!
o well far from my loss
ever wonder how it infact works .... :)
guess not eh!
OSIRIS
i use 3 fingers to time the divice and turn it off and on !
;) just ask captian kir
just my 10 cents
Jump back to Lords of the Ring archive
http://web.archive.org/web/20110109060034/http://www.overunity.com/index.php?topic=1872
http://www.youtube.com/watch?v=sHswoNpc0Tk
weird click about 2.14 ?
Bolt you have PM
Hello Bolt
I dont know if you recieved it but I sent you a Privat e message have you got it.
Thanks GSM
the lords speek ...
;D
i have just finished the G6 tpu
all digital...
works great
OSIRIS
you want it .. better build it yourself
i learned it i built it i OWN IT .. forever!
true facts
so i was playing with the digital pulser unit on a lot of coils i have wound ..
and i will say be carefull espically useing the 6" and neos ...
oouch is all i say DO NOT TOUCH THE RING OR THE MAGNETS ...
the thing comes alive .. it heterodynes from 1 freq ..
i have videoed it and used and inductive amp to hear the wobble
the g6 spinns it is pulsed slowly the spinner ups the freq .. the magnets syncronize the unit and cause to heterodyne .. 50 hz - 350 hz .. the thing will most likely fly ...
without recovery it sounds like this zzzzzzzzzzz bing zzzzzzzzz bing zzzzzzzzz = winde up bing is the high freq colapse ...
the "BING" is the exact same as an 808 audio sample ... get it ....
i have demoed this about a year ago useing an audio amp ... with 1 blowen tube .... ;D
so make a small timmer unit that CAN GO BINGGGG ;D AND FEED AN AUDIO AMP ...
then match the impeadence of the amp to the impeadince of the big coil you wish to drive ..
william
http://www.youtube.com/watch?v=36RGonC_Zgs&feature=youtu.be 8)
This should work. It excludes all copyright infringements.
http://www.youtube.com/watch?v=epRcSjATULA&list=PLRMAWXyCH-CWQufIqRcXBTypK_mjmNq0u&index=8 (http://www.youtube.com/watch?v=epRcSjATULA&list=PLRMAWXyCH-CWQufIqRcXBTypK_mjmNq0u&index=8)
http://www.youtube.com/watch?v=3H3qZ2YQ-UQ&list=PLRMAWXyCH-CVjuZ3HY10HnOBGxcFA3jjB&index=8
http://www.youtube.com/watch?v=zbypRYyrlHE&feature=youtu.be
https://www.overunityresearch.com/index.php?topic=860.msg74468#msg74468 (https://www.overunityresearch.com/index.php?topic=860.msg74468#msg74468)
https://www.overunityresearch.com/index.php?topic=860.msg74342#msg74342 (https://www.overunityresearch.com/index.php?topic=860.msg74342#msg74342)
https://www.youtube.com/watch?v=MaAY_9GLkog&feature=youtu.be (https://www.youtube.com/watch?v=MaAY_9GLkog&feature=youtu.be)
This changes the view.
Welcome back GK, continue on, you have my attention.
thay
I am sure I have a lot of eyes this time also.
Pieces were shown by SM, Mannix, Erfinder and Sauron.
The funny thing is SM confused the educated so well. I guess because everyone wanted to be spoon fed.
But he actually 'showed' everything and his verbals were actually the exact opposite.
He never lied and was a master predigitator.
We are at the end of history so this doesn't matter any more.
Been away for quite some time due to health reasons and relocation. Trying to get my head back into this...
GK
Looking at your graphic -- If you can heterodyne the frequencies of 2 coils/oscillators and collect the standing wave with a third coil...
Is this the simplistic gist?
Do you think Tesla's enigmatic 3-6-9 may have some bearing here?
Regards,
Bob
Dr.? Nikola Tesla
Tesla and the picture with the glowing bulb in his hand
"heterodyne" ? Wow,a me foreign expression ! I do not use such words !I need a physics dictionary,also a word dictionary for such a synonym !
hetero -dyne dyne: dyn and erg = scientifical Physics/EE expression anymore official physics units,today ?
hetero (f.e. -sexual ) : same or anti-/counter part ? + And - to - and + self-wringing ,anelizing ,equalizing,changing
"standing wave": to sweep ,schweben, free in air , ( scooter music )
Michelson Morley Mirror-chamber study/experiment target ? Result ? What and what not !?
Faraday : cage internal cage wall( thickness,material,fata morgana ? Mirror ,material ) external
EM-wave EM-particle Dualism
A moving linear streaming wave to rounding wave,as ring~donut,or becoming crise-/circle round as 3d sphere :
Chukanov charge ball,charge cluster ,'fire ball'
A collage ,I hope it does not take away from the right orientation !
Lords of the balls ;) Yello : The Key to Perfection
Visualize IT ,senseational ,instead 'sensational',stone by stone,brain1 image brain2 feel
sen-ti- men-te- ly -z-ing
Sincere
OCWL
Thanks for the reply, Lanca.
Heterodyning refers to combining two frequencies to create a third
https://en.wikipedia.org/wiki/Heterodyne
GK
Further thought --
How might the Leedskalnin PMH and its permanent cyclotronic nature relate to the TPU?
Is its circulating charge of a static nature, or can its intensity be modulated?
Can we harvest from this modulation (standing wave?)
Bob
male and female or ccw and cw or positive and negative
or Fleming orientation and Lenz orientation or centrifugal and centipetal or altus/altura: high AND deep
GEGENSTROM [ 'against (main) stream ]
( Waerme-Tauscher , like Delta-Omega machine by Schukey https://de.wikipedia.org/wiki/Schukey-Motor (https://de.wikipedia.org/wiki/Schukey-Motor)
or Max Mueller Friedrich
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=de&AP=&PR=&PD=&PA=max+mueller+friedrich&IN=&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=de&AP=&PR=&PD=&PA=max+mueller+friedrich&IN=&CPC=&IC=&Submit=Search)
: Starkstromfusionbatterie/ generator https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=2&ND=3&adjacent=true&locale=en_EP&FT=D&date=19760115&CC=DE&NR=2429086A1&KC=A1# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=2&ND=3&adjacent=true&locale=en_EP&FT=D&date=19760115&CC=DE&NR=2429086A1&KC=A1#) )
Male frequency and female frequency for a birth ,for a twilight frequency,together but not same
How much weigths in gravity units this particle-wave before after this heterodyn-ing process ?
Max Planck : Quant- definition,Quanten-Paar/pair,Quanten-WIRKUNGSZAHL = Konstante ? ! Relevante !?
gotisch/Deutsch/german
https://de.wikipedia.org/wiki/Plancksches_Wirkungsquantum (https://de.wikipedia.org/wiki/Plancksches_Wirkungsquantum)
english
https://translate.google.com/translate?sl=auto&tl=en&u=https://de.wikipedia.org/wiki/Plancksches_Wirkungsquantum (https://translate.google.com/translate?sl=auto&tl=en&u=https://de.wikipedia.org/wiki/Plancksches_Wirkungsquantum)
Above in the texte/article to read : " ......from a photon ..... ! Einstein-photoelectrice
Missing : " ..... from a phonon .... ! Planck-phonomagnetics
To visualize,by own cum putere ~ computer'n : my,Your,our,them
Hermann Minkowski : Time-Machine GEGEN´WART- 'LICHTKEGEL'
VERGANGEN-WART
ZUKUNFT-WART
https://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/World_line-de.svg/250px-World_line-de.svg.png (https://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/World_line-de.svg/250px-World_line-de.svg.png)
it was it is it will be
horizontal vertical diametral gyroscopic
By : personal R.A.M. and R.O.M. ,in application, in memoriam et Just do it ! ;)
Ambulo in R.O.A.M and TIME
Compton,Cooper pair et cet.
related Hintergrund/Background-Strahlung(Video)/Rauschen(Audio)
TV~ 'Schnee/'snow' sehen/to see und hoeren/to hear https://www.google.com/search?client=firefox-b-d&q=tv+schnee (https://www.google.com/search?client=firefox-b-d&q=tv+schnee)
But : black and white RAND/-OM/ -NESS ,colo(u)r,FORM-ation,Cre-ation,I-mage ,pic-ture/Pixel to FORM 1-2-(3-)D
to smell to feel !? To spect to re/flex
Recommendation : espacent advanced search applicant/inventor
A. Siegfried Stargard
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=siegfried+stargard&IN=&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=siegfried+stargard&IN=&CPC=&IC=&Submit=Search)
B. Alexander Manfred Gregor,DD ( G.D.R. patents, and later DE)
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=DD&AP=&PR=&PD=&PA=+manfred+gregor&IN=&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=DD&AP=&PR=&PD=&PA=+manfred+gregor&IN=&CPC=&IC=&Submit=Search)
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=alexander+manfred+gregor&IN=&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=alexander+manfred+gregor&IN=&CPC=&IC=&Submit=Search)
somebody "citating documents" ? ::) TZ,TZ,Tz ! Stockholm-Award level ! In Physics
TPU-inventor professional 'hoam' ?!
Entertainment,Mission,WARNING https://www.youtube.com/watch?v=0EBTn_3DBYo (https://www.youtube.com/watch?v=0EBTn_3DBYo) ?!
Curie and Maxwells waves, RADIO/RADIATION dose per millirem/Kg
hetero's f.e. f + m = c( 0,1,2,3,...) this is dyn ,like in the above KRAFTWERK: chain/Ketten -reaction to AUTO-
matique,
:"takenfor grant"/Selbst-Versta(e)nd-Lich/In-stinct-iv ~ it is logic ,common sense
But,because GEGENSAETZE ZIEHEN SICH AN ( or 'aus' ::) )
Humans,Fauna,Flora,........ All above 'official' temperature ~ pressure ~ density = ≥ 0°K and "momentum" IQ=≥0
Not linear,but progressive-dynamique,Dynaste : crescere creche/Jardim infantil/Kindergarden
WIEGE DER NATUR KI.-TA.
Swastika,ccw Swastika,cw (Y)in and/g (Y)an,whose ccw and cw 'double' their dance
Combination the two contraer Swastika rotors : Lebost turbine ! Suzan vane !?
www.barrylebost.com (http://www.barrylebost.com)
. ! ? | ? ! . The Wall/The Bridge . ! ? ? ! .
Left Brainer Brainer Right
The Words/Letters World ~ al gebra The Image World ~ geo-metria
Designing,sculpturing,giving body : Leben/OD' einhauchen
OD': Lust + Last (Auswahl ! ;) )-Motivation (+Votivation : Komm GLEICH,3 hours later !)
Choices She,choices He ,or choices IT = Destination/(Voraus-)Bestimmung
No Comment ! Unimportant !
(Harem !? 8) M-version for hes and F-version for shes ;D ,it is halal,by total Ali-Mente )
Wiener's Men-Machine to Hu'Men-Nature www.sensortime.com
Sincere
OCWL
Before all go off half cocked: Merry Christmas and here ya go:
It is really quite simple as SM said. The guy is a genius in reconfiguration. Remember this: He kept pushing 3 windings, one with in the other.
He split the stungun transformer into its constituent parts by removing the iron core and replacing that with air spacing. This thing is noisy.
The charge pump circuit is in microwave ovens, Radar equipment, Automobile ignition systems, and TVs and many other systems that boost voltage.
I took the STUNGUTZ.jpg circuit and removed the transformer.
I built an LTPU out of plastic.
I then inserted the LTPU in between the stun gun circuit and the transformer matching the transformer coils with the LTPU coils.
The LTPU is 2 TPUs intertwined. Yep. There are two of them there. Why, I dont know. I guess SM wanted to further obfuscate the investors.
The outer side coils of the Center toroids become air spaced extensions of the retriggering coil. See?
As the charge pump increases in voltage the field expands inward to the center tordoids. Remember the amp meter in the middle?
This shunts the charge field into the FE wire collector. Think thumping.
Now in regards to the cabinet magnet that SM used. Halucinogenic prestidigative magic. I mean really. Watch what he does.
That is how he solved the switching between the starter battery(remember he mentioned a car?) and the regenerative pulsing.
I have been sitting on this since 2006 to ensure that SM, Mannix and others were 'Out of the way'. They spoke of NDAs but I believe they were showing the public limits and anything past would bring trouble. The rest of us didn't know either. I still do not know what the acceptable limits are, except no live demos and no videos are obvious.
There have been a number of radio engineers in the background helping release this but were not in a position to or wanting to be in the public eye.This schematic performs 99% of all the functionality and the protocol which the field video shows. In fact the video is all that is needed to get something working.
The distance between the verticals and the center toroids is the physical tuning. One has to play with that in accordance with their build.
The TPU little blacks boxes are stun gun charge pump circuits. This circuit is a model of all Tesla's builds. The charge field just shows up in different places.
This is what I saw when I covered my living room floor with all his patent pictures and why I mentioned the movie 'Contact'. I even went to the VLA.
Sm mentioned lightning. Yep, thats a spark gap.
Sm mentioned ramp up. I see that as the neon starters get warm. This could temporarily knock the system out of resonance. I have a hard time abating this.
That was when I realized the open tabs on the LTPU were shunt or jumper connections to hook the two fuses on the back into the system.
I was given a suggestion by an engineer to place an aluminum disc from a thin sheet of HVAC tubing on top of one TPU. Sparks shot out the sides like a corona. Shades of T.T.Brown.The open tabs on the center toroids' box are used for shunting, testing and measuring.
Every section of this schematic has been tested and shown in my previous videos and posts. Like I said before 'I have hidden nothing.'
Entropy is evident if the oscillator frequency does not match up with the inductance, capacitance, tanks and wire length.
I wound adhoc based up the ring diameter and height. Probably could have made tighter but I noticed a lot of stunguns are designed sloppily.My assumption was that sloppy was safe.
Just dont try to sell this and you'll be fine...
Unannounced visitors are never welcome.
GK,
What was the thing about the device geting too hot after 20 minutes and having to be shut down?
Quote from: MasterPlaster on December 11, 2020, 04:43:21 AM
GK,
What was the thing about the device geting too hot after 20 minutes and having to be shut down?
Hello MasterPlaster,
The problem,the solution : 1 motor 1 cylinder workpeak workaverage temperature efficiency ?
2,3,4 ....cylinder ? motor workpeak workaverage temperature efficiency ?
1 solarcell : how many circuits/revolution processes in 1 cm x cm
cold solarcell : % efficiency best,average,
%efficiency scale cells/circuits velocity-speed becoming warmer/hotter ?
1 TPU power output per Kg ,per gram(m)?
Specific power/weight max. periodically/permanent - preserve !
1 TPU + 2nd TPU + 3rd TPU = 20 min x 3 = 1 hour work function ,inter-mediary !
TPU ,in use :
RT ~ ambiental temperature global average 15°C, down ,up to 0° K ,supra-conduction
In refridgerator,in freezer,ultra-cooler,in vacuuo
Sincere
OCWL
p.s.:
Schukey DELTA-OMEGA
REVERSIBLE PROCESS
heat/cold engine,cold cascade ,showed the engine and process in the 80' in german BWM,Bundes-Wirtschafts-Ministerium',by Mr.Schukey( now R.I.P.,the inventor,2020 p.C.) ,down to
Negative 180°C temperature~ density~ pressure ( liquid air CO2- filtering ? carbon reuse: graphene )
Source: Wirtschaftswoche,2020 p.C. Archiv(e)
Graphene for Nano-TPUs-Arrays ~ NOVASOLIX
related #35 Thomas Townsend Brown,whose co-operated with Nikola Tesla :
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=thomas+townsend+brown&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=thomas+townsend+brown&CPC=&IC=&Submit=Search)
"Gravitator cells","kings clothes"
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=thomas+townsend+brown&IN=&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=thomas+townsend+brown&IN=&CPC=&IC=&Submit=Search)
G-cells compared physical apparatus concept and external effect (Grebennikov cavity ?)
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=5&ND=3&adjacent=true&locale=en_EP&FT=D&date=19660823&CC=US&NR=3267860A&KC=A# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=5&ND=3&adjacent=true&locale=en_EP&FT=D&date=19660823&CC=US&NR=3267860A&KC=A#)
Prof. Dr. Hermann Plauson https://en.wikipedia.org/wiki/Hermann_Plauson (https://en.wikipedia.org/wiki/Hermann_Plauson)
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=hermann+plauson&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=hermann+plauson&CPC=&IC=&Submit=Search)
only energy related
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=28&ND=3&adjacent=true&locale=en_EP&FT=D&date=19250609&CC=US&NR=1540998A&KC=A# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=28&ND=3&adjacent=true&locale=en_EP&FT=D&date=19250609&CC=US&NR=1540998A&KC=A#)
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=68&ND=3&adjacent=true&locale=en_EP&FT=D&date=19460425&CC=FI&NR=21227A&KC=A# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=68&ND=3&adjacent=true&locale=en_EP&FT=D&date=19460425&CC=FI&NR=21227A&KC=A#)
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=86&ND=3&adjacent=true&locale=en_EP&FT=D&date=19430424&CC=DE&NR=734794C&KC=C (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=86&ND=3&adjacent=true&locale=en_EP&FT=D&date=19430424&CC=DE&NR=734794C&KC=C)
"kings clothes" ? rubber
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=otto+traun&IN=&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=otto+traun&IN=&CPC=&IC=&Submit=Search)
Tesla,Plauson related
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=39&ND=3&adjacent=true&locale=en_EP&FT=D&date=19220710&CC=GB&NR=157263A&KC=A# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=39&ND=3&adjacent=true&locale=en_EP&FT=D&date=19220710&CC=GB&NR=157263A&KC=A#)
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=40&ND=3&adjacent=true&locale=en_EP&FT=D&date=19220710&CC=GB&NR=157262A&KC=A# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=40&ND=3&adjacent=true&locale=en_EP&FT=D&date=19220710&CC=GB&NR=157262A&KC=A#)
Louis Charles de Beaupre surwatteur Ruhmkorff
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=louis+charles+de+beaupre&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=louis+charles+de+beaupre&CPC=&IC=&Submit=Search)
same invention level https://www.nytimes.com/2008/05/31/business/31marks.html
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=alvin+marks&CPC=&IC=&Submit=Search
Hey GK
Thanks for sharing
In your first post on this 3rd page you have what seems to be a vid as an attachment. When I download it, it comes up a file. Not a vid file, just generic file. When I download again, and again, the name of the file is just some random letters, but each time I re download the letters change but the file is still the same size.
anyone else have this issue?
Mags
hi Magluvin
the file you mention is the video shown in post 27 page 2
cheers
Alvaro
Thanks alvaro
Mags
FE wire. Iron wire?
Mags
wire,"wire material" :
https://patents.google.com/patent/US4913744A/en (https://patents.google.com/patent/US4913744A/en)
The construction may comprise different photovoltaically operative inorganic and organic materials and may assume various configurations.
https://patents.google.com/patent/US20070246094 (https://patents.google.com/patent/US20070246094)
Patent citations !
an-organic or organic :
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=marcel+meredieu&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=marcel+meredieu&CPC=&IC=&Submit=Search)
material : specific frequency,Eigen-Spin, related : Spintronics
https://www.google.com/search?client=firefox-b-d&q=spintronics+review (https://www.google.com/search?client=firefox-b-d&q=spintronics+review)
f.e. : http://www.rexresearch.com/zaymidor/zajmidor.htm (http://www.rexresearch.com/zaymidor/zajmidor.htm)
https://www.google.com/search?client=firefox-b-d&q=green+ferrit (https://www.google.com/search?client=firefox-b-d&q=green+ferrit)
https://www.greenoptimistic.com/green-ferrite-solar-cell-japan-20110920/ (https://www.greenoptimistic.com/green-ferrite-solar-cell-japan-20110920/)
Professor Naoshi Ikeda ,Okayama Graduate School of Science and Technology
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=naoshi+ikeda&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=naoshi+ikeda&CPC=&IC=&Submit=Search)
Sincere
OCWL
p.s.: experimenting ?
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=hanna+albert+awad&IN=&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=hanna+albert+awad&IN=&CPC=&IC=&Submit=Search)
p.p.s.: https://overunity.com/3344/lords-of-the-ring-2/dlattach/attach/179839/image// (https://overunity.com/3344/lords-of-the-ring-2/dlattach/attach/179839/image//)
magnetic field = infra-red field
https://fdocuments.net/document/chapter-7-electromagnetic-radiation-aka-radiant-energy-or-light-a.html (https://fdocuments.net/document/chapter-7-electromagnetic-radiation-aka-radiant-energy-or-light-a.html)
EM RADIATION FIELD -BARRIER https://atticfoil.com/index.php/about-radiant-barrier/why-is-an-air-space-required/ (https://atticfoil.com/index.php/about-radiant-barrier/why-is-an-air-space-required/)
Mr. "I will be back"( Ex-Mister Universum,body-building) movie and detector : https://www.youtube.com/watch?v=AAzja2tWAg8 (https://www.youtube.com/watch?v=AAzja2tWAg8)
https://www.reflectixinc.com/ (https://www.reflectixinc.com/) https://www.reflectixinc.com/wp-content/uploads/F3-OEM-Guide.pdf (https://www.reflectixinc.com/wp-content/uploads/F3-OEM-Guide.pdf) 1980` ::) 1880` :)
What is Reflectix®Insulation?
Our standard product is made up of seven layers. Two outer layers of aluminumfoil reflect 97% of radiant heat. Each layer of foil is bonded to a tough layer ofpolyethylene for strength.
Two inner layers of insulating bubbles resist conductive heat flow, while a center layer of polyethylene gives Reflectix®high reliability and strength.Reflective Technology - An Old Concept:In the 1980's the Scottish chemist and physicist Sir James Dewar invented the Thermos flask, also known as the Dewar flask or vacuumflask, for the purpose of storing liquid gases at very low temperatures.
The basic function of the vacuum flask is to thermally insulate the con-tents and to prevent heat from flowing either in or out
Faraday cage comparison !
https://www.reflectixinc.com/wp-content/uploads/f2-solutions-for-the-pro-0809.pdf (https://www.reflectixinc.com/wp-content/uploads/f2-solutions-for-the-pro-0809.pdf)
page 10
Reduces noise through plenum THERMALVOLTAGE also called THERMALNOISE ,THERMALSOUND
Paintable https://en.wikipedia.org/wiki/Infrared (https://en.wikipedia.org/wiki/Infrared) , insulation,mirror :https://www.patentauction.com/patent.php?nb=11044 (https://www.patentauction.com/patent.php?nb=11044)
2007 ! https://overunity.com/3286/zimmer-billig-mit-strom-heizen/ (https://overunity.com/3286/zimmer-billig-mit-strom-heizen/)
Re: Zimmer billig mit Strom heizen (https://overunity.com/3286/zimmer-billig-mit-strom-heizen/msg49277/#msg49277) «
Reply #6 on: September 13, 2007, 02:10:57 AM »
https://overunity.com/2606/electricity-saver/ (https://overunity.com/2606/electricity-saver/)
https://wattsupwiththat.com/ (https://wattsupwiththat.com/)2010/08/17/survey-says-many-are-still-clueless-on-how-to-save-energy/
About Academies of Sciences quality,trust and faith :
https://www.greenbuildingadvisor.com/question/why-is-reflective-insulation-still-being-sold-by-hd-and-lowes-and-used-by-many-contractors (https://www.greenbuildingadvisor.com/question/why-is-reflective-insulation-still-being-sold-by-hd-and-lowes-and-used-by-many-contractors)
Study Electro-Magnetic RADIATION by thermographical camera,by thermoacoustical camera,
both : Thermical Audio-and Video- camera 8)
Muenchen,ehemals Solln ,Fuerstenackerstr.34,Vermieterin : Frau Ratzinger-Beck
1987
CENSOR : CENSUS INVEST
Denn DEIN ist das Reich und die Kraft ..........
SYSTEMRUECKABWICKLUNG,vor 1987 STANDART
BGB : 30 +3 Jahre Verjaehrungsfrist ORGANISIERTER BETRUG
2020 - 33 = 1987
FE is iron wire.
I had two tests for this. The first one was in parallel with the internal horizontal loops. The second one was FE through the center toroids. Either way they both receive.
I keep repeating that this thing is extremely noisy. It is a huge charge pump/ center of stun gun circuit. And it can be built using Radio shack parts like SM stated.
SM stated that all circuitry must be in the middle of the device. I still laugh at this remark. Of course. Where else would you put the antenna?
In the middle meant both inside the verticals and in the device center. He sure did play with words to get the configuration and protocol exposed.
In the LTPU demo in the hotel room SM swipes a cabinet magnet around the outer side. Mid way he lets go and it sticks! So he showed iron wire and the switching of the battery to resonant power.
Now here is the item that I never saw covered and that was the device never runs a long time. SM mentioned heat build up but he could also have been eluding to entropy.
And no telling if he was pointing out resonance. He did mention be careful of getting the two frequencies close. He did mention the exploding TV so I sincerely believe he knew what he was talking about and capable of.
So in response to Bob Smith's remarks, heterodyning can be a positive or negative factor.
I know in all my tests heterodyning really caused a lot of problems and not that that was bad. I have all new equipment on my bench. LOL. And after 2 scopes, 2 meters, a truck, 5 neighbor's cable routers and one divorce. Its all fun and games till somebody takes offense of the mystery.
@MasterPlaster: refresh my mind about the heat up. I did post about the neon starters needing to warm up. I have a setup where the outer primary has a neon starter in series. They glow at startup but then after warmup they really chatter. I use that to test the reception of the windings. With what I have now is on that output bridge if you exclude a filter cap the LED lights bright off the peaks of the oscillations where with a cap the LED is dimmer due to just running RMS. ...naturally because the cap diminishes the high spikes. A way better method to test than delicate bench equipment.
If this is not what you meant let me know. And cheap Stun gun oscillators are not meant to run continuously either. I have hemi'd mine up.
GK:
Thanks for returning with this. That damn torrid has troubled me for years. I know he gave out a lot of info that near got him landed in the joint. He was locked in a ND and a Threat beyond measure. Once he found out they were never going to release it, he tried his best to tell stories and comments to convey how to do it. It lingers to this day here and other forums. All about the coils and how they interact with each other. One day, One day. Then it has to be set free so the whole world can benefit from it.
Keep it comming for us and the world. I have had a few ideas and will pursue them.
Above all, GREAT to have you back again. Rock on.
Quote from: giantkiller on December 13, 2020, 01:47:25 AM
@MasterPlaster: refresh my mind about the heat up. ......................
If this is not what you meant let me know.
The Heat problem is documented in:http://www.rexresearch.com/markstpu/markstpu.html
Thanks
Good Morning,
related #44 " heterodyning" I would use the principle from thermo-cryo-electro(iono-plasma) term :
reversible process
Sincere
OCWL
Been looking over the circuit GK has presented on page 3. The upper right portion of the circuit, in blue, seems to be isolated from the rest of the circuit other than the 1 wire leading down to Q3, and induction of the blue coil in the blue loop and then the single wire off of the one ended coil labeled 'center' to the 'snubber'?. If the oscillator to the left in the circuit pulses the 2 turn primary, which seems to induce the blue loop winding, then with the diode D2, C1 would get charged, but seemingly no way that it is discharged. Once it is charged, that blue loop would no longer be doing anything for the circuit once c1 is fully charged. I must be missing something. Q3 looks to be in a position to send current through the green FE wire from C1 to the neg of the source. But Im not seeing how C1 is able to do so via 1 wire from the blue loop circuit.
Mags
That blue segment is the charge pump. The snubber circuit is an attempt to alleviate the spark gap that normally is there in many other charge pump ckts. I believe SM did this in a different way which he did not talk about.
The charge in the pump oscillates up like a resonant ringing. The field ramps up in volume to hit the center trigger coil.
I left this hanging as this is always the safe way to start at a distance. Then I can connect it fully to trigger the snubber to discharge the charge pump field.
With out the snubber there the FE still pickups. It is in parallel with the horizontals. The schematic doesnt make that clear but they are just like the cut tpus that SM did.
I had said this years ago that I was able to duplicate the individual pieces that SM stated whether clearly or by a misnomer.
I then said that hooking those pieces together is a rat's nest of choices and I played with those over the years.
The schematic is where I want all attempts to fit in that black box under the two center toroids.
This step blows things up at a slower rate now. Before, things just exploded and took equipment with it.
In using a step up ckt like a cfl or stungun I drove the primary, tanked the secondary/verticals and was able to light LEDS off of a bridge on the center toroids.
This was straight air core transformer of the verticals to the centers. But I proved that the air core worked but only because of the high voltage drive. The HVAC easily crossed the space.
I have kept stripping out the HV to get the charge pump up to transmit to the centers. The reason why this an obsession is because at this point where more and more of the stages can be interconnected in less a random sequence the device till is a little chaotic but definately self damaging.
The balance is get the charge pump voltage to cross the gap, dump the collapsing field into the FE wire, rectify the capture without causing damage to the components, reset the charge pump causing a large BEMF.
This is what I always knew was the last step. The collapse is the thumping. The rotating field is there as the flux moves along the horizontal plane of the device and the collapse travels around the ring.
The FE wire by itself is an antenna to the noise. With current circuit I have picked up 50v spikes on the centers.
I have increased the number of guarantees as:
1: The FE picks up at 90 degrees. I bridge that and LEDS always light.
2: The vertical to centers are air core transformer coupling.
3: The windings shown in the LTPU are very similar to the stungun charge pump circuit times 2. There are even bleeder resistors across the large caps and what look to be large diodes by them.
The large electrolytic caps were pushed off to the side making them look they did something else. The large yellow caps I believe are the large caps inside the charge pump.
The fuses are spark gaps. But they never light up in the videos. I have set neon starters up like that and then used jumper connections to connect them in and out of the circuit. So my device lights up.I just burned another circuit up hooking the verticals in serial with the inherent secondary of the oscillator stage of the charge pump. Of course that worked the 50VAC showed up in the centers.
SM stated they went through many TPUs to get it working. I am starting to think he was referring to circuits.
As a bottom line:
You can drive the outer primary and the centers will pickup from the secondaries.
You can drive the secondary directly to promote air core connection testing.
The FE wire is a tangible tap off point for power.
Cat juggling with feral rabid cats.The take away is by building the LTPU by what we can tangibly see and knowing how fields travel has gotten me to this stage where just interconnections can be made.
And some of those still reproduce the same thing.
I hope I haven't left anything out.
Building the smaller units only exposed a limited number of device artifacts that left a lot of builders wondering even more.
But I am having a field day with this build because it is so open to modifications.
I had done an audio test where I drove the verticals with 48 volts of 3hz. The needle on the SWR swayed back and forth at a 6 foot distance.
I am at a fork now where I make a choice of using larger TV parts or guitar reverb circuit.
Well....excuse me but as I become older I prefer simpler explanations.So what is the principle , can you explain schematic in parts ? Charge pump and magnetic field collapse into the FE rod do not disturb charge pump ?
Actually I planned to use such method to generate excess heat in shorted FE pipe.I remember there was video from russian fellow about some "magical" transformer being a pipe constructed by glued ferrite rings and secondary being FE nail
When the charge pump finishes building the field crosses the gap between the ring verticals and the center toroid verticals, the discharge trigger enables the charge dump into the FE.
I refer to the previous video post of the field expansion.
I did add a tank circuit below the collector of the q3 and above d3 that matches the oscillator frequency so that the d3 did not discharge the pump.
The harmony of the system starts with the air gap. The drive power sets the timing in the air gap crossover. SM mentioned a frequency of 5k which is coincidently the most stun gun oscillations.
The crossover timing has to agree with the harmonic reflections in the system.
Follow Tesla coil testing with the test equipment by not connecting to device. I use an EM meter and SWR meter. Those fuses in the back are for testing also. I have connected them at places where I though SM would have used the empty tabs on the center toroid box.
The snubber acts like a non destructive spark gap.
The oscillator of the system is an Armstrong oscillator configured as an air core High Q multiplier. This is it in a nutshell.
When everything is hooked up then play with the drive current. Two frequencies can be used to enable the triggering with the heterodyned outcome.
Place a small neodyn on the FE. I use the little ball as it is light and will respond anywhere on the FE.
The magnetic field does not hold well with out drive. It also prefers to remain stable in the event of an in field disruption. The internal spark gap of a stun gun is amplified by the field in the charge pump and the secondary inductance. Telsa goes through extreme measures to get a capacitance in the surrounding field. That way there is no device to breakdown under the high orders of charge held. In the TPU SM gives warnings.
https://www.youtube.com/watch?v=C-Bn70PpbrM
I thought this might open some minds...
https://www.nuenergy.org/nikola-tesla-radiant-energy-system/ (https://www.nuenergy.org/nikola-tesla-radiant-energy-system/)
QuoteEnergy Directly from the Atom
The radiant energy system is a self-oscillating capacitive system. Once it is set into oscillation, very little power is expended in keeping it going. Because it is an electrostatic oscillating system, only a small amount of charge moves through the system per cycle, that is, the coulomb per seconds = amps are low. If the charge is used at a low rate, the energy stored in the system will be turned into heat at a slow rate enabling the oscillations to continue for a long period of time.Tesla's "COIL FOR ELECTRO MAGNETS," patent #512,340 is a very special coil design because, unlike an ordinary coil made by turning wire on a tube form, this one uses two wires laid next to each other on a form but with the end of the first one connected to the beginning of the second one. In this patent Tesla explains that the double coil will store many times the energy of a conventional coil.[1] Measurements of two coils of the same size and with the same number of turns, one with a single, the other with a bifilar winding, show differences in voltage gain. These bifilar Tesla's coils can be explained solely on the basis of their electrical activity. A bifilar coil is capable of holding more charge than a single wound coil. When operated at resonance, the distributed capacitance of the bifilar coil is able to overcome the counter – electromotive force (e.m.f.) normal to coils, inductive reactance.
Because of the electrical activity, a bifilar coil does not work against itself in the form of a counter – e.m.f., the potential across the coil quickly builds to a high value. The difference between the turns becomes great enough that the energy is practically all potential, at this point, the system becomes an electrostatic oscillator.
Minimal work is done in my radiant energy system due to the absence of wasted displacement currents. As small heat losses occur, oscillations are maintained by surplus charge generated by atomic catalytic reactions, energy is siphoned from the kinetic moments of these charges. Very low energy expenditure allows power delivery to an electrical load over an extended time period without an external fuel supply. After an initial input of energy from an outside source, the radiant energy electrical generator will operate as a very efficient device.
By reviewing history it is understandable why some inventions are not commercialized. It is economics, not science, that is the main factor. It will be remembered that alternating current was opposed by powerful financiers in Tesla's time.
Michael Pupin, noted in his autobiography:
"...captains of industry...who were afraid that they would have to scrap some of their direct current apparatus and the plants for manufacturing it, if the alternating current system received any support. A most un-American attitude...but ignorance and false notions prevailed in the early nineties, because the captains of electrical industries paid small attention to highly trained scientists."[2]
It takes very little energy to promote a resonant field.
The charge pump is the heart of microwave ovens, analog tv, automotive ignition systems. and stun guns. SM even promoted the exploding TV as an accelerating charge pump of vast amounts of energy. The main problem with the exploding T.V. circuit was there were no components in place to dump the collapsing field to ground. Sm stated 'There can be no ground in the TPU.'
I promoted setting a charge pump of a 20 foot diameter next to an airport. He emphatically stated 'No'. I got his attention.
Application of the High Q multiplier circuit merged with the charge pump circuit is the TPU schematic yet no one tries this.
The field in the charge pump(the large vertical windings) builds and crosses the space to the center toroid triggering a field collapse into the middle FE loop. This creates a one way magnetic diode. Does anyone catch this? The original promotion was '90 degree coupling'.
I am the only one who has spent years showing the subsections of this circuit without conjecture from the greats, Ion, Marco, SM, Erfinder and the others that left immediately after I exposed the charge pump as an integral part of the device. The last statement made to me by Moab was 'Put a diode in it!'. Configuration proof.
I even built the large TPU in accordance with what we have seen and proved the configuration works as a charge pump replicating the field size and strength promoted in the exploding TV. I even EMPd 5 cable routers throughout the last neighborhood I lived in. More proof. The energy is there.
Final answer is and for the new members that are eager the schematics are in my previous posts across OverUnityResearch and OverUnity. They are out of sequence.
Exact copy of TPU is the LTPU build using twin lead outer wrapping. The device is staring everyone right in the face. Build that model with the large vertical air core as part of the charge pump and one will see the field strength meter show the energy. What is the final standalone device? You will see it when you start blowing shat up. The largest TPU is the Alcubierre device. Another example in our faces. Yet people want destructive propulsive detonations or free demos.
I know there are watchers that want the final answer handed them so they can self promote themselves into history. Marco warned me about this and now I have to watch this action unfold.
I am not into this for followers or fame. From the smallest to the largest devices there are many examples of the technology out there so one can not really be the hero.
It is the High Q multiplier circuit merged with a charge pump, i.e. the exploding T.V.
There it is, schematics and demonstrations. The trolls, weasels and prairie dogs finally have what they have been searching for...
Because the TPU is an inert device it can be conspicuously housed in an inconspicuous housing.
This then can be transferred across borders relatively easy and dispersed to objective points.
Any information divulged past what has been could be deemed as a national security threat.
Its simply a charge pump...
Further on...The resonant charge pump exists in a lot of places
SM swiped the sides of the LTPU with a magnet and he dropped a magnet in the open TPUs to excite the Armstrong oscillator into action.
Since SM was an audio engineer I took the audio approach and found a single channel TDA2003 worked quite passively with a 9 volt battery.
Here is the video to show this.
The Q-Multiplier represents a magnetic version.The LTPU was polyphonic whereas the other smaller TPUs were monophonic.
By using speakers I achieved a self resonant, dynamically variable inductor.Cheers.
http://youtu.be/8zEhnRv4SN8 (http://youtu.be/8zEhnRv4SN8)
There is not much time left.
Quote from: Magluvin on December 14, 2020, 07:39:48 PM
Been looking over the circuit GK has presented on page 3. The upper right portion of the circuit, in blue, seems to be isolated from the rest of the circuit other than the 1 wire leading down to Q3, and induction of the blue coil in the blue loop and then the single wire off of the one ended coil labeled 'center' to the 'snubber'?. If the oscillator to the left in the circuit pulses the 2 turn primary, which seems to induce the blue loop winding, then with the diode D2, C1 would get charged, but seemingly no way that it is discharged. Once it is charged, that blue loop would no longer be doing anything for the circuit once c1 is fully charged. I must be missing something. Q3 looks to be in a position to send current through the green FE wire from C1 to the neg of the source. But Im not seeing how C1 is able to do so via 1 wire from the blue loop circuit.
Mags
The circuit is missing the spark gap components in the blue loop.
This was part of the dissemination at that point in time. No complete schematic and no demos.
With my last post comes another integration step.The 'tuning', if that is what the necessary term is, constitutes minor configuration changes to produce the harmonics to capture.
The snubbing is the capture of sorts. It limits the self destruction as SM stated was necessary.
There is one more step where the configuration is a small charge pump(the little hidden circuits in the TPUS) fed into a larger charge pump(the obvious large visual configuration(ring) of the TPUs).
The thumping is where the snubber executes, the collapse feeds a discharge. In all the TPU demos we ave no access to a time domain to dissect the harmonic charge executing a spark gap discharge via the snubber. It happens all too quickly. But because SM demo'd a large white discharge at arm's length we can be assured that there are spark gaps incorporated. Sm even mentioned that blown glass fuses make excellent gaps.
I was always intrigued that 1: we never saw the back end of the LTPU to see the one fuse sparking and 2) he has two fuse holders but only one one fuse in place. I contend he was exposing that the two sides(top and bottom) were at some point mixed. But we see two large supposedly power filtering caps inside the ring each with bleeder resistors. They fit well as either power supply or charge pump fixtures.
This last configuration component is where the power comes from. A warning of danger is needed here.
I hope this helps. Steven Marks is the only old head possibly still alive so the trail has been lost and those people and families are safe from any implication.
Hey GK
So would the spark gap be across the diode?
Mags
Quote from: Magluvin on May 15, 2022, 01:35:10 PM
Hey GK
So would the spark gap be across the diode?
Mags
Across the diode would include the inductor and the cap on the other side of the current loop.
The diodes would cause a one way dead short across the spark gap that would not allow the charge pump to build as much needed to bridge ionize the gap. This I have played with quite a bit moving the connection points attempting to keep the spark from happening. Using microwave transformers or ignition coils as the simplest way to stick inductors into the charge pump. Keep the input voltage low and alter the frequency to moving the incoming values around and through the operating window. Follow Tesla coil tuning guides to secure equipment from failures via EMP or discharges. And this is the step where caution is needed. This is the part of the schematic that is purposely left out due to liability.
In this charge pump the inductive storage is on both sides.
The input side is a step up and the output side is a step up with the charge pump in the middle.
The bleeder resistor is just like the resistors across the large caps in the LTPU.
The LTPU shows two large charge pumps but only one spark gap as per the one open fuse and one open fuse holder in the rear.The parts are there in the many photos we have. Twist connections around the configuration.
So one can see with two large charge pumps and EMP discharges the testing at this point is very dangerous. The beginning point for me was the GK4 as this was an open face microwave transformer of sorts. 48v at 5khz was enough to prove this stage was valid. The wrap around circuitry, physical configuration and tuning were the next goals.Discharges are to be avoided if not handled correctly. This is the one conversation I wish I could have with SM. Containment while designing. I burnt a lot of equipment. The TPU is circuitry just like the stun gun design. SM stated that all must reside inside. What a clue that was. The charge. He also stated that if you ground the center you lose it.
The TPU is an open air stun gun/ Armstrong operator with the discharge buried inside. This is the exact opposite of the other charge pumps we see where the circuitry is inside and the discharge is external. I refer back to the High Q multiplier.
The oscillations were transmitted and captured via directional ring antenna.
Build a charge pump from uwave or ignition coils then create a feed back to retrigger the oscillations.
The neighborhood will shut down.This answer was given too by his demos in the house on the hill by the power towers. I think he used those to camouflage the signature.
Quote from: Magluvin on May 15, 2022, 01:35:10 PM
Hey GK
So would the spark gap be across the diode?
Mags
Simpler diagram that seems to retain all of the critical features.
Im not seeing the potential function of the spark gap where you have depicted it Rei. That wouldnt discharge the cap into an action that does anything as there is no connection to the collector circuit by the top side of that cap. The cap would still remain charged.
Also by eliminating the armature side( top terminal) of the relay to the left, makes it non functional also as to the original circuit.
If the fe or iron wire in the collector circuit induces the collector coil, then the logical spark discharge would be here on the right in green.
Mags
Just guessing on my part also. ;) Mags
Quote from: Magluvin on May 18, 2022, 11:18:52 PM
Im not seeing the potential function of the spark gap where you have depicted it Rei. That wouldnt discharge the cap into an action that does anything as there is no connection to the collector circuit by the top side of that cap. The cap would still remain charged.
That is EXACTLY what I thought, then I actually tried it. ;D It seems things get interesting and a bit unpredictable when we get above a few hundred volts.
I used a 600v GDT and a ~2mhz Tesla Extra coil, driven at quarter-wave resonance with a small linear amplifier and a watt or two. 0.001uF to 0.02uF seemed fine. Potential was measured using a scope probe near the coil as well as with an isolated DC meter directly across the cap.
As you can see, it was a simple setup with no recovery/harvesting, I just wanted to confirm the cap discharge effect.
Once the arc is established it seems the built-up charge has a path to equilibrium, so it rebalances and discharges fully (or at least 80%). Seemed vaguely reminiscent of Aaron Murakami's plasma ignition experiments. Or maybe it was an artifact of my setup? (end-driven so potentially similar to your pic).
Ionization of the air above the cap lowers the resistance between its' terminals
(by 'above' i mean where the terminals exit the cap, not how you orient it in your circuit)
Hello all,
I see there are postings about audio circuits.
The feedback loop creates a much needed oscillator and creates physical motion. That motion vibrates the two reflectors. These are creating cymatic patterns which forms resonant patterns in the acoustic field through kinetics. By shifting the center control vertically in the container I can create a potential difference in the aether.
The picture of the microphones pointing into the speaker flushed SM out to start posting publicly. His response was 'Finally'.
I am at the place where the antenna needs a container for the reverb/snubbed destructive harmonics to be tested.
The design and construction are taking place in Unity/Archimatix then exported to Vectric Aspire 11.504 for router table cutting. I did all my exact measuring in Blender then built the Ax graph accordingly.The container will be 5 feet in diameter and around 3.5 feet in height. The LTPU by itself only goes to a certain level of operation. The next step is housing the unit, like in the book. I still have to figure out what I am going to tell the insurance company as to how my garage got warped or the hole in the garage ceiling.
People been poking at me and asking as to what I have been up to over the years. So here ya go. I took the TPU beyond all conception. After all, the story need props, right?
There is a second book in the works but it has no publish deadline as of yet. Jack Canfield, who wrote Chicken soup for the soul said 'Just write a book and you wont believe where it take you'. I see now.