Hello,
You can find lots of examples of what I am going to
present here in as simple a way as I know how. You can
also find reams of complicated mathematics (Bearden et
al) and refer to the works of Telsa and thousands of
others. Here I represent to you what I have observed in
nature and what seems to be the stuff that they harness
and describe.
Sparks and lightning are actually cracks in the physical
universe much the same as cracks in a pavement. When you
witness a spark or lightening you are actually looking at
the physical universe being split apart. Behind this
universe (which is probably an illusion or hologram) is
the sea of pure energy in which it (the physical universe
where we live) maifests. Imagine a photograph of some
scene from nature torn in half. Now place these halves on
a light box and move the two pieces apart. You will see
what lightning is - a split in the physical universe.
The outside of this universe is experienced as pure white
light as in lightening if the crack is large enough, or
some shade of light if the crack is not large enough. If
the cracks are really small there may only be heat and
motion.
All the machines we design only provide the power to
crack the universe and tap into the energy out there.
This energy used to crack the universe comes from the
energy stored in the the matter. The universe can be
imagined as a sponge immersed in water. The white energy
is the water and the sponge is the physical universe.
Within the sponge there are regions that consist of
matter and space. These are really one thing differing
only in degrees of density. Actually the sponge (matter &
Space) is just the white light curled up tightly. It
would resemble a black hole if you can get out and have a
look at it.
The forces of magnetism gravity etc. are the properties
of the white light energy interacting with itself as the
matter/space universe.
Now the best way to tap into this white light is through
high voltage methods. You just have to collect the
opposite charges at each end control the discharge. The
reason volt meters fly all over the place with a
discharge is that it is not controlled - a plasma is the
way to go I think.
As an example, if you want to amplify some BEMF just put
a spark gap in the circuit - a direct tap into the white
stuff just lurking behind this 3d universe. Thank you for
reading this. Bye
well im glad thats cleared up then!.. :o...how can i get an electric motor to run in it then, got a circut?.. ???
@darchorse
This is a very interesting view of nature.
helmut
Quote from: b0rg13 on October 07, 2007, 11:56:40 PM
well im glad thats cleared up then!.. :o...how can i get an electric motor to run in it then, got a circut?.. ???
A bendini motor with a spark gap in the coil circut that you take the BEMF off. Someone uses a reed switch that sparks as the back BEMF comes through the circut and gets a bigger surge. There is also another pulse type motor in that forum that increases in power by the addition of a spark pill (whatever that is). I will post some links later.
Look, I know what I said sounds crazy but if you just watch next time you see lighting - you will see the truth of the matter lol. Also if you have ever looked at a very calm ocean or large body of water, you will see rips in the surface under correct lighting conditions. This is where the surface tension is split and in that rip that you will see a flow. The surface of our 3d world also splits in this fashion reavealing the source enery (seen as lightning). This is just another example of "as above so below". Look around you - say in a forest you can see penises and vaginas in some trees - this is funny but it's true. There is a great connection in all natural things and we only have to look hard enough to see them.
Bye, thanks for reading this
P.S. Check this out
http://www.redicecreations.com/specialreports/2006/01jan/holographic.html
thanks for sharing :)
peace
Quote from: darchorse on October 09, 2007, 12:57:01 AM
A bendini motor with a spark gap in the coil circut that you take the BEMF off...
I can?t remember: what law is a bendini motor bending? ;)
After reading the title of this I was gonna be a smart as and say Batteries.... But Darchorse makes some sense, something to ponder...hummm.
Could these power discharges from Lightning be splits in-the space time continuum?
Carl
Hey Darchorse, your right and so are Dr. Aspect, Dr. Bohm, and Dr. Pribram.
Carlos Castaneda learned this from Don Juan, and so did I.
Goodwill to all, for all is one.
The holographic paradigm is a new set of words to describe what we all once knew, and have forgotten because we are fixated on the physical reality. We learned the "laws" of physical reality and forgot our mental/spiritual heritage. But, fortunately that is not a permanent condition. Plus based on this information we can redefine the physical laws of the universe to suit our needs.
Remember, you are a God in training.
Blessed Be!
@Darchorse
Thanks for your positive posts and for the link.
Best
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Ffreenrg.info%2FImg%2FMaya_Small.jpg&hash=11dca0a77f75bc7bd4ed58cda3978ac9f74834de)
i like that description, its like an artist describing a tree, without the knowledge that it grew from the roots up...
any ideas on how to tap into this energy??
making lightning is the easy part.
so ,.. how to tap energy from a spark gap ?...pros/cons?.
Con: a continious status-arc gets hotter than the sun. and will melt our electrodes.
so we can only "tear the universe" for short durations.
It would seem, that this 'tube' would simply be an extention of the input/output of the 'valve.
if the valve is capable of passing a controllable stream of energy through its 'opening', then the rest of the tube would (simply put) be a connection of 'valves' in their fully open position.
Howdy Y'all,
I forgot about this thread, and started another one with basically the same topic.
http://www.overunity.com/index.php/topic,4429.0.html
Anyway I am modifying my Soft Particle Reactor to use a relay to provide the spark gap. It's a four pole relay so I will really have 4 spark gaps in parallel. Plus I modified the driver circuit to be a DC to DC converter, store the high voltage in a big cap then use the relay to discharge the big, high voltage cap through the Reactor (basically a transformer). I having trouble with the trigger circuit right now. I should have some results in a few days. Here's the link to the Soft Particle Reactor information, pictures and schematics.
http://www.overunity.com/index.php/topic,4255.0.html
Fun with arcs and sparks...
OK, Mo Later...
it may have some % chance of tearing an enourmous hole in the fabric of space, and destroying the entire universe...
<erk??>
i wouldn't mind an uncontrolled tap, provided you could "pull the plug" if it got out of hand.
and close the tear.
then you could use the resistance of your circuit as the control, rather than a 'valve'