The Earth orbits the Sun at a relative velocity of 67,000 miles per hour. In so doing it constantly traverses the magnetic field of the Sun. Two inertial frames intersecting therefore potential energy exchange between the two. This exchange takes place not coherently but at an extremely low frequency of 8-12 hz. The sun's spin is not like the Earth's. It is different at the equator than at the poles. So it's magnetic field is in turmoil. Anyway the sun's magnetic field turmoil travels throughout the solar system and the Earth's magnetic field becomes pulsed at 8-12hz totally dependent on the intensity of the magnetic field of the Sun and the relative velocity of the Earth's orbit. This is a huge amount of potential energy exchange, way more than solar heating effects of the Earth and a cloud ain't going to stop it.
SM always has a permanent magnet in play to start up his units. If we take an 8hzmagnetic pulse relative to a permanent magnet and make sure a conductor is nearby a voltage will insue. We have changed the magnetic field the conductor lies in and it will manifest a change in potential energy. If this is done properly it will create an emf pulse in the winding at 8hz. If the wire is a closed loop there will insue an 8hz pulse in that section of the loop that experiences the magnetic field change. And current will flow around the loop which creates it's own inertia. Each time the pmagnet cycles we create an 8hz electomotive force inside the loop. The energy of the 8hz pulses being stored in a vortex dc current. Each pulse from the sun in relationship to the magnet results in increase flow of electrons in a given direction within the loop. The loop begins to build up electrical inertia and results in a magnetic field all it's own. It does not effect the Sun or the Earth the generators of the pulse it just keeps on sucking up inertia. Now the vortex current is just like the pmag, It's mag field is now in reference to the 8hz pulse directly. This results in a further increase in vortex acceleration until the apparent velocity of the loop current reaches 1000 mile per hour. At this relative velocity to the 8hz pulse it is in synch with the Earth's potential energy absorption from the sun's frequency. There will be no more apparent change in the velocity of the vortex current. The inertial concentration of the loop being equal to the Earth's inertial concentration. We have now amplified the 8hz pulse into a current that is proportional to the amount of electrons available to be accelerated. Now the coil vortex speed fluctuates at 8hz. Not it's voltage! It's inertial frame exchanging potential energy back and forth with the Earth resulting in current velocity increase and decrease at 8hz. Lets go another stage and take some of the first loop and coil it around a much larger loop. The first stage now taking the place of the pmag that was the initiator or receiver in the first loop. The velocity changing through the second stage primary winding (driven by the 1st loop) starts to ramp up until it gets to 1000mph. And there are alot of electrons moving in this coil because it's bigger. So there is amplification of current (not voltage) all starting with our little bar magnet. The speed of the current oscillating at 8hz. We can go omega amounts of stages with each stage getting more and more current going but each stage able to give us the full power.. Now we need to get energy out of this deal because that's why we made it. Look at how an ammeter works. It has no idea what voltage is inside the wire just the amps and yet the needle swings. The core current is massive and oscillating in intensity so we need a big ammeter. We also need to make sure that when we draw current it doesn't disturb our input scource. We need the current in the collector to be able to respond to the Earth field, not to other inertial frames created by the current draw path. Current change to voltage change without spawning eddy currents.
Interesting theory sparks, might I ask, have you read my Macro's Dancing Magnet's thread?
If not, have a look at it please, it is not long: http://www.overunity.com/index.php/topic,2814.0.html
Question for you, relating to your theory there: Is this inertial magnification of the current in your proposed TPU design here analogous to the reason why Macro's magnets move so much more violently at 7.8Hz than at any other frequency when pulsed with the same input power?
Thanks...
This is a really interesting analysis. Word on the street is that Sweet's activated magnets for his vacuum triode amplifier had ELF resonance.
That is, if you put a razorblade on the activated magnets, it would oscillate back and forth indefinitely at a frequency somewhere between 4-15hz.
@Tao
Thankyou for the link. :) They sure as heck resonate at 7.3. The theory I propose comes from the understanding that magnetism is the inertial component of the observed field. A permanent magnet is comprised of atoms whose electrons are caused to vibrate or travel in a harmonic system. The inertia created by the charge carriers creates the magnetic effect. You smack it with a hammer no magnetic effect. Potential energy introduced into the inertial frame has disrupted the electronic inertia of the system. The electrons no longer form an inertial flow and the magnetic effect goes away. There is no majic in the permanent magnet that is able to draw energy from some unknown power. It is just electronic inertia. Potential energy will flow from one inertial frame to another if the relative inertia and direction are not equal. When you speed up in a car you aren't going any faster you just have more inertia in a given direction.
We can transfer potential energy of the Earth's inertial frame into an inertial frame we create. The potential energy will flow from the Earth frame until the created frame inertia equals the Earth's or merges into the Earth's frame. Like a car on the highway getting pushed by a 24,ooo mile long train.
The tpu is in resonance with the Earth due to it's orbital current relative velocity.
Speeding up a little then slowing down a little at 8Hz.
Where do you get your info on the resonant frequencies of magnets?
How did you determine that frequency of exactly 7.3 Hz for example?
That Schumann resonance you begin with, the 8 to 12 Hz, is well known.
But the exact frequencies of permanent magnets depend on rather a lot
of variables and as far as I know are extremely difficult if not nearly
impossible to measure accurately, unless you have a high tech lab
with very sensitive equipment...
Plus, different types and compositions of perm magnets have different
internal (molecular) structures and their material matrices have different
characteristics, all influencing the resonant frequencies and wavepatterns
related to them...
It just seems to me that you are talking about magnets as if they are all
the same and all quite simple in structure....?
(don't get me wrong here, this is meant as constructive criticism hey ;))
@Koen 1
The magnetic field of the pms is an inertial field arising from the charge carriers movement within the mass. It is this inertia that is recognized by Earth's magnetic field or inertial field. Potential energy will flow at the inteface of two inertial frames. In other words the Earth is trying to demagnetize the pm and the pm trying to magnetize the Earth so there will be potential energy exchange. The orbiting inertial frame of the tpu gets in the middle and the potential energy is caused to flow through it and it becomes the third magnetic or inertial frame in play now. There need not be resonance for all this to happen just interfacing of inertial frames and the potential will flow.
Ehm... I don't really have a problem with your relativistic potential difference
concept, that seems pretty straightforward.
But I'm still wondering where you got those frequencies...
I have yet to encounter the first permanent magnet with a
sticker on it that states its exact resonant frequency... ;)
Quote from: Koen1 on March 10, 2008, 02:11:59 PM
Ehm... I don't really have a problem with your relativistic potential difference
concept, that seems pretty straightforward.
But I'm still wondering where you got those frequencies...
I have yet to encounter the first permanent magnet with a
sticker on it that states its exact resonant frequency... ;)
There is no resonance needed just an inertial frame relative to another inertial frame. The system pulses because of the orbit of the Earth relative to the orbit of the Sun. The sun being magnet A The Earth magnet B The Tpu magnet C You can arrive at the pulse frequency by dividing the orbital momentum of the Earth's orbit by the Earth's spin momentum. 67,ooo miles per hour orbit relative velocity/ divided by 1,000 miles per hour spin relative velocity. 6.7. It's off from the 7.3 but it also depends what lattitude you are in and what diameter you feel the Earth ends. MAGNETISM IS THE FOOTPRINT OF THE ELECTRICAL CHARGE CARRIERS INERTIA WITHIN THE OBSERVED FIELD.
Quote from: sparks on March 09, 2008, 06:37:32 PM
...SM always has a permanent magnet in play to start up his units. If we take an 8hzmagnetic pulse relative to a permanent magnet and make sure a conductor is nearby a voltage will ensue. We have changed the magnetic field the conductor lies in and it will manifest a change in potential energy. If this is done properly it will create an emf pulse in the winding at 8hz. If the wire is a closed loop there will ensue an 8hz pulse in that section of the loop that experiences the magnetic field change. And current will flow around the loop which creates it's own inertia. Each time the pmagnet cycles we create an 8hz electromotive force inside the loop. The energy of the 8hz pulses being stored in a vortex dc current. Each pulse from the sun in relationship to the magnet results in increase flow of electrons in a given direction within the loop. The loop begins to build up electrical inertia and results in a magnetic field all it's own. It does not effect the Sun or the Earth the generators of the pulse it just keeps on sucking up inertia. Now the vortex current is just like the pmag, It's mag field is now in reference to the 8hz pulse directly. This results in a further increase in vortex acceleration until the apparent velocity of the loop current reaches 1000 mile per hour. At this relative velocity to the 8hz pulse it is in synch with the Earth's potential energy absorption from the sun's frequency. There will be no more apparent change in the velocity of the vortex current. The inertial concentration of the loop being equal to the Earth's inertial concentration. We have now amplified the 8hz pulse into a current that is proportional to the amount of electrons available to be accelerated. Now the coil vortex speed fluctuates at 8hz. Not it's voltage! It's inertial frame exchanging potential energy back and forth with the Earth resulting in current velocity increase and decrease at 8hz. Lets go another stage...
@sparks,
Before I go any further, I would appreciate knowing more about this stage of the design. It sounds as if you are stating that a very fast electrical current can be made to move about a closed loop of wire using nothing more than a permanent magnet?
If so, what experimental details would I need to demonstrate this stage?
Thank you. :)
@Rosphere
The magnetic field of the Earth is huge but diffuse. You need to design the coil so that the pulse of the Earth is interfacing with the pm and not the current of the coil. So the coil has to be wound so that when the current flows it's magnetic field is cancelled. This allows the kicks to keep coming. The easiest way is to use bifilar wire.
@sparks,
Yes; I am sorry that I left the magnetic field of the Earth out of my question, (and the Sun for that matter.) I assumed that, since we are both here on the Earth, under the Sun, that this was already a part of our experiment. I was asking about the other parts of the experiment, the magnet and the wire, and if I was understanding your text correctly. Please let me try again:
Are you stating that a very fast electrical current can be made to move about a closed loop of [bifilar] wire using nothing more than a permanent magnet, [the Earth's magnetic field, and the Sun's magnetic field]?
Have you done this experiment yourself or have you witnessed someone else doing this experiment?
Thank you. :)
The only experimentation I have done is with magnetic cancelling and inducement of currents. I'm finding that the magnetic field of the Earth is responsible for counter-emf not just the current alone. In a bifilar opposing current flow the currents of the two circuits if equal result in no inertial difference with the Earth field. This allows the circuit to operate with no counteremf arising.
Now to the heart of the matter as to how to get potential energy out of the Earth and into the ring current. I believe SM's little tpus create voltage using the hall effect. The magnetic field of the Earth passing through what appears to be lead. This causes an initiated circuit's electron's to flow in a circuit dependent on the magnetic flow through the element. This creates charge in either the top of the lead or the bottom of the lead depending on the magnetic flow through it. In other words it converts the magnetic pulse of the Earth to a voltage pulse. The bifilar configuration of the collector windings then respond to this voltage by creating counter rotating currents with no countering mag field to screw up the hall effect device. (or lead receiver) I posted a hall effect sensor below. Kinda looks like a tpu.