it is what it says
i will post a pic when i finish it
this unit does not consume power!!!! my motor is the only thing that consumes..
this is my first of this style... i have many more to build this style but they will use power but ... that is no consern of mine ;D
this is NOT CLOSED LOOP OPERATION no need for it 8)
ist
wakeing the world up !! come on already
may i ask 1 more question ....do you like my tesla switch ;D
ist
You don't have to start a new thread using a different name for the same effect :p. The neo super spark gap buzzer something? :P. You sure are giving little for people to help you. No schematics no drawings no nothing. You just have some vague words. I think this makes your threads unpopular. Try to give the people some actual plans to work on.
:P
dude
if you need more than my words somthing is WRONG!!!
im building this as of yesterday.... it aint done yet.....
i said i will post a pic when i compleate it ....
if you or anyone else can build it faster then by all means do it post it here
this is not my tech.... it is everyones left to us from TESLA introduced public by MANNIX brought to you by the SM GROUP
ist
i am just 1 of the rest of you im not involved in the tpu or anything originally im just a kid that loves to play with junk.... and im shareing my findings with all of you
i dont like doing things alone.... so join in ALL ARE WELCOME HERE
if you guys think im the first to figure a few small things out YOUR WRONG.....
Hello innovation_station,
your post are interesting and I wish to see more information about your experiment.
Can you give some info of schem, picture, how it work, etc, please?
Thanks,
Altium
hello guys
i drew a lil pic
this is not my unit this is the layout for the use of my unit :)
my unit being used as a tesla switch the goal of this device b4 i built it was to charge batteries for free ... and use the output for.... you decide
this is how it works i have a source battery this will supply the 4mot tpu and also it will charge the recovery battery from the pluse from the source battery ;) hope you got that ;D
then the RE RADIENT ENGERY will charge the bank for output
so for this unit im building there will be hot power consumed only by my switching device
in my next unit the mot will consume hot engery the recovery battery will be delivered the hot electricty from the 4mot tpu the cold electricty can be converted to hot or it can be used as is and redirrected to the bat bank for out put ;D
so what will happen when i run her hot my source battery will drain over time my recovery battery will be charged and my bank CHARGED FOR FREE when the source battery is dead FLIP THE SWITCH ;D run in reverse use the recovery battery as the source and the source as the recovery
sounds like an IST 4MOT M TPU TESLA SWITCH TO ME ;D
ist
Do you have a more practical information about your experiment? This is just a block schem. No more.
"today is the great ist .... today is the great ist day i have ever knowen" smashing pumpkins...
almost done i will post a pic or 2 of my unit ... and there many many explanations to follow and posible ways to achive the GOAL....
IST
Okay, thanks,
I want to replicate your experiment, when all practical information is possible.
HERE IS A SIMPLE P OF C board i put togather months ago...
this is how my units work.... they are based upon this
enjoy
do some test for your selvs and post your results ....
ist
my 4 mot pics as pro missed today ... ;) 8)
here is a pic of my 4 mot reed switcher ....
ist
Hey IST. The pics are pretty dark. can ya lighten up a bit? Thanks bro.. Moby.. :)
hey moby
been a wile....
there is really nothing to see in those pics .... just 4 reed switches a magnetic wheel a small dc motor ... 2 aa batteryies
it is a rotating switch that is all :)
not so much can be said for the following pics ;D
here is a pic of my entire unit assembled
have a good look at it :o
there is nothing on the input or the out put ;)
ist
here is a clear pic of my 4mot base unit
4 0 zone units...... in 1
ist
IST, is that the best you can do?
Sorry, but I can do more than that by Pulsing a simple Coil of Wire.
.
:)
just 1 more pic for today....
ist
Quote from: FatBird on July 25, 2008, 05:29:59 PM
IST, is that the best you can do?
Sorry, but I can do more than that by Pulsing a simple Coil of Wire.
.
;D
i have only just begun.... lol
cheers :)
my challange for everyone will be to mesure how long my unit will run off a battery WITHOUT RECHARGING THE SOURCE BATTERY ;D ;D
also to mesure 10 miliamps of draw from my source battery lol
ist ;)
personally i have never even mesured 1 miliamp of draw.... so as best as i can tell in my uneducated arpoch to free engery is it indeed is free engery
so there you have it THIS CAN BE WIRED UP A MILLION WAYS ;) depends on what you want to achive.....
the best of luck :)
@ FatBird
does yours affect your tv radio and make some noise?? cuz mine DOES NOT!!! ;D ;) 8)
ist
oh is it emp proof?? well maybe......
Sorry, but I never had my radio on when I was pulsing the coil, so I don't know. Maybe I can try that.
I just pulse the coil at about 35 KHz, using an 18V drill motor battery. My Sig Gen pulses the FET Gate directly. One end of the Coil is connected to + 18V on the battery. The other end of the Coil is connected to the FET Drain. The FET Source is connected to the Battery - terminal. It is really a simple circuit, but I CANNOT get overunity no matter what I try.
The light bulb is 120V & 40 Watts. It gets white hot bright when the Sig Gen Pulse Width control is at its maximum pulse width position.
Thank you for sharing your circuit photos.
.
Quote from: FatBird on July 25, 2008, 07:11:30 PM
Sorry, but I never had my radio on when I was pulsing the coil, so I don't know. Maybe I can try that.
I just pulse the coil at about 35 KHz, using an 18V drill motor battery. My Sig Gen pulses the FET Gate directly. One end of the Coil is connected to + 18V on the battery. The other end of the Coil is connected to the FET Drain. The FET Source is connected to the Battery - terminal. It is really a simple circuit, but I CANNOT get overunity no matter what I try.
The light bulb is 120V & 40 Watts. It gets white hot bright when the Sig Gen Pulse Width control is at its maximum pulse width position.
Thank you for sharing your circuit photos.
.
you are most welcome for the pics
in your post that is the exact point... the faster the pluse the brighter the bulb.....
this is how and why my p of c works you can plainly see that the laptop power supply can not lite the bulb verry bright it is lit but extreamly dim when i pluse my mot with the same amount of input my bulb is bright really bright the pics do not do this justice you really must try it .... and actually the same amount of engery but used only half as long over time 8) becaused it is plused!!! so ideally half as much consumptuion and 100 times brighter .....
so ... in my laptop power supply there is a trip switch to portect it from overload .... so in the primary of the mot i have a curciut of low self induction in my laptop power supply i have a curcuit of high self induction and an over load portect curcuit .... and finally in my mot the secondary is a curcuit of high self induction but it is less high than my supply..... so
the electricty had but 1 path that is through the secondary of my mot to the load 8) there no caps or diodes in this simple p of c
ist
ok so lets talk about the operation of this unit i just built....
there 4 transformers all 4 are primaryies only ...
they are dubble primarys 1 of low selfinduction and 1 of hi selfinduction
they are hooked up as 1
the pluse is offered 2 paths
only 1 coil works its way back to ground ....
guess the coil...
of course it is the biased secondary of the tranny that would be why it consumes no power....
it just almost cannot get through.... just the smallest amount
this coinsides with what TESLA says the high self induction will resist sudden change .... it is a choke coil
now on my primary i get a kick back when i disconnect the power right !!!
i did a vid a wile ago now demenstrating this verry effect so
i must take off of my unit from my original primary this is where the kick back will return to because of the low selfinduction ...
so if
YOU ARE FRYING FETS AND SWITCHING DEVICES THIS IS WHY .....
YOU GOT IT IN THE WRONG PLACE.....
THAT IS YOUR OUT PUT.... PUT YOUR CAP THERE... ::)
THEN USE YOUR SWITCHER TO SHORT THE CAP.... IMAGINE ..
NO MORE FRIED FETS LOL!!!!!
ist
i could talk for weeks about this unit ....
but please dont take my words for it try it out ;D see for yourselvs....
I'd say, 100 times brighter because it self-resonates.
Does the lamp get any hotter than with straight DC?
my unit is plused extreamly slow .... no resosnance here yet ;D
yes my bulb gets hot!! now if you put my ist neo zap vibrating spark gap as your driver ......
then you see de light damn bright lol
as well you get her singing... the tranny that is .... you will hear the magic ....
ist
the problem already i am speeking of about 4 or 5 diffrent ways to do it in this thred and it confuses everyone errrrrr
the unit i posted is teslas ozone pattend it is intended to use almost no power ... to see the light you must switch amparage.... my unit is not designed to do this... my following units will do this ... i built this to teach how this works where people will not get hurt learning.... because when you switch big power you will have big power return!!! it can KILL YOU be wise.....
this unit however will not kill you it is like an electric fence when you get a zap .... sure you feel it but it will not kill you i have been zapped hundreds of times ;D from this unit
but this is NOT A FREE ENGERY DEVICE IT IS A CONVERSION DEVICE
the conversion takes place from cold to hot and happins inside the cap the cap is delivered a cold potencial from the kickback it flips the polarity to hot or positive potiencial ... and it seeks ground 8) send it through your load to earth ground or to the supply ground
Quoted from IST
"THAT IS YOUR OUT PUT.... PUT YOUR CAP THERE... Roll Eyes
THEN USE YOUR SWITCHER TO SHORT THE CAP.... IMAGINE .. "
Joe's reply
- Well Jim Bob that sure sounds like the ozone patent switching setup
Elray says- Well shit ive been telling you and cleetis that all along..
Hello, innovation_station,
can you draw a simple schematic of your device? From pictures I cannot see principle of work and coil settings. But I want to replicate it. Can you help me with electrical schematic please?
Thanks.
added test tranny to the 4 mot unit it is used as a secondary in my mot unit.....
i will post a pic when i finish it ....
ist