Please show at least one replicated working device - any type, what ever Over Unity.
Newman?s motor for me its it is not overunity like my 30 years old wall-clock in kitchen - needs new battery in every 3...4 years,
I do not chaff,
We can read - "uncovered", "breakthrough" , "solved!" ... but in reality?
Nothing?
khabe
I think also that there is no working device at the moment, I am waiting too.
greetings
Quote from: khabe on July 29, 2008, 07:45:41 AM
Please show at least one replicated working device - any type, what ever Over Unity.
Newman?s motor for me its it is not overunity like my 30 years old wall-clock in kitchen - needs new battery in every 3...4 years,
I do not chaff,
We can read - "uncovered", "breakthrough" , "solved!" ... but in reality?
Nothing?
khabe
This is a problematic question... You know, all those working OU devices are a very very well kept secret.... And, "They" know everything...
It's better not to talk about this at all...
Cheers!
;D
Howdy Doubters,
Monster radiant energy...
http://www.youtube.com/watch?v=FY-AS13fl30
Blessed Be Brothers...
Quote from: khabe on July 29, 2008, 07:45:41 AM
Please show at least one replicated working device - any type, what ever Over Unity.
Newman?s motor for me its it is not overunity like my 30 years old wall-clock in kitchen - needs new battery in every 3...4 years,
I do not chaff,
We can read - "uncovered", "breakthrough" , "solved!" ... but in reality?
Nothing?
khabe
khabe you have the same symptons that many people have had for many years
FRUSTRATIONThings will come when the time is right, so try and enjoy the journey and hope that the TIME IS RIGHT MOMENT happens in your lifetime, it certainly has not happened in Billions of others lifetimes :)
Cheers
Sean.
Quote from: z.monkey on July 29, 2008, 12:05:14 PM
Howdy Doubters,
Monster radiant energy...
http://www.youtube.com/watch?v=FY-AS13fl30
Blessed Be Brothers...
Holy Crap!! Impressive, but would hate to the leccy bill for it! ;D
Howdy Y'all,
Z.Monkey Like Monster Tesla Coil!
I would estimate that those arcs are around 10 Million Volts. I made a home built Tesla Coil, but mine just plain sucks compared to that one. I would hate to get caught by one of those arcs. I noticed the guy in the video was wearing an Oklahoma University shirt. I'm a Longhorn fan myself, but I'll give them credit for the Kick Ass Tesla Coil...
Blessed Be Brothers...
Quote from: z.monkey on July 29, 2008, 12:05:14 PM
Howdy Doubters,
Monster radiant energy...
http://www.youtube.com/watch?v=FY-AS13fl30
Blessed Be Brothers...
Of course - Tesla, but this is not secret, Tesla coil I built 25 years ago. Small one but anyway.
khabe,
PS: this actual TC does not use ext. power ? ::)
Quote from: CLaNZeR on July 29, 2008, 03:41:16 PM
khabe you have the same symptons that many people have had for many years
FRUSTRATION
Things will come when the time is right, so try and enjoy the journey and hope that the TIME IS RIGHT MOMENT happens in your lifetime, it certainly has not happened in Billions of others lifetimes :)
Cheers
Sean.
I have no symptons you meant - its very hard to read all threads at beginning up to ends - I really want to know - something replicated or not.
No sarcasm !!!
khabe
Joseph Longo's Plasma Converter turns our most vile and toxic trash into clean energy-and promises to make a relic of the landfill
By Michael Behar Posted 03.01.2007 at 3:00 am 2 Comments
How It Works: Startech?s trash converter uses superheated plasma-an electrically conductive mass of charged particles (ions and electrons) generated from ordinary air-to reduce garbage to its molecular components. First the trash is fed into an auger that shreds it into small pieces. Then the mulch is delivered into the plasma chamber, where the superheated plasma converts it into two by-products. One is a syngas composed mostly of hydrogen and carbon monoxide, which is fed into the adjacent Starcell system to be converted into fuel. The other is molten glass that can be sold for use in household tiles or road asphalt. Photo by Kevin Hand
Called plasma gasification, it works a little like the big bang, only backward (you get nothing from something). Inside a sealed vessel made of stainless steel and filled with a stable gas?either pure nitrogen or, as in this case, ordinary air?a 650-volt current passing between two electrodes rips electrons from the air, converting the gas into plasma. Current flows continuously through this newly formed plasma, creating a field of extremely intense energy very much like lightning. The radiant energy of the plasma arc is so powerful, it disintegrates trash into its constituent elements by tearing apart molecular bonds. The system is capable of breaking down pretty much anything except nuclear waste, the isotopes of which are indestructible. The only by-products are an obsidian-like glass used as a raw material for numerous applications, including bathroom tiles and high-strength asphalt, and a synthesis gas, or ?syngas??a mixture of primarily hydrogen and carbon monoxide that can be converted into a variety of marketable fuels, including ethanol, natural gas and hydrogen.
Perhaps the most amazing part of the process is that it?s self-sustaining. Just like your toaster, Startech?s Plasma Converter draws its power from the electrical grid to get started. The initial voltage is about equal to the zap from a police stun gun. But once the cycle is under way, the 2,200ËšF syngas is fed into a cooling system, generating steam that drives turbines to produce electricity. About two thirds of the power is siphoned off to run the converter; the rest can be used on-site for heating or electricity, or sold back to the utility grid. ?Even a blackout would not stop the operation of the facility,? Longo says.
It all sounds far too good to be true. But the technology works. Over the past decade, half a dozen companies have been developing plasma technology to turn garbage into energy. ?The best renewable energy is the one we complain about the most: municipal solid waste,? says Louis Circeo, the director of plasma research at the Georgia Institute of Technology. ?It will prove cheaper to take garbage to a plasma plant than it is to dump it on a landfill.? A Startech machine that costs roughly $250 million could handle 2,000 tons of waste daily, approximately what a city of a million people amasses in that time span. Large municipalities typically haul their trash to landfills, where the operator charges a ?tipping fee? to dump the waste. The national average is $35 a ton, although the cost can be more than twice that in the Northeast (where land is scarce, tipping fees are higher). And the tipping fee a city pays doesn?t include the price of trucking the garbage often hundreds of miles to a landfill or the cost of capturing leaky methane?a greenhouse gas?from the decomposing waste. In a city with an average tipping fee, a $250-million converter could pay for itself in about 10 years, and that?s without factoring in the money made from selling the excess electricity and syngas. After that break-even point, it?s pure profit.
Someday very soon, cities might actually make money from garbage.
Here are a couple:
MEG
http://jnaudin.free.fr/meg/megv2.htm
CFR
http://jlnlabs.online.fr/cfr/index.htm
Quote from: kevin on July 29, 2008, 11:57:24 PM
Here are a couple:
MEG
http://jnaudin.free.fr/meg/megv2.htm
CFR
http://jlnlabs.online.fr/cfr/index.htm
Replicated - I meant - you did it and you are able to show it,
jnlabs and similars are not interesting at least for me,
Not any needs to show oscillograph curves, even no voltmeters - no tons of wires in dark cellar ;-)
Just MEG on the table switched just only with load (lamp for example) - nothing more,
Well lighted room, clean table, normal camera (!!!) and no inarticulate chit-chat tellings,
I have built tens of MEG - unfortunately no satisfying results, but I really believe that someway it need to work,
Regards,
khabe
Quote from: khabe on July 30, 2008, 08:59:05 AM
Replicated - I meant - you did it and you are able to show it,
jnlabs and similars are not interesting at least for me,
Not any needs to show oscillograph curves, even no voltmeters - no tons of wires in dark cellar ;-)
Just MEG on the table switched just only with load (lamp for example) - nothing more,
Well lighted room, clean table, normal camera (!!!) and no inarticulate chit-chat tellings,
I have built tens of MEG - unfortunately no satisfying results, but I really believe that someway it need to work,
Regards,
khabe
tens of MEG's? i think you are exaggerating...
perhaps you could show us just one of them? doesn't need to be running a load, just in a well lighted room, clean table, normal camera. ;)
Howdy Y'all,
This is my version of the Hubbard Coil, the Infinity Core. It is operating in the picture, you can see the output voltage on the meter. I am still in development.
Blessed Be Brothers...
Quote from: z.monkey on July 30, 2008, 09:50:57 AM
Howdy Y'all,
This is my version of the Hubbard Coil, the Infinity Core. It is operating in the picture, you can see the output voltage on the meter. I am still in development.
Blessed Be Brothers...
Cool, where are you posting?
Howdy Alan,
The build is on the Infinity Coil Thread here.
http://www.overunity.com/index.php/topic,5144.0/topicseen.html
Blessed Be Brothers...
Quote from: WilbyInebriated on July 30, 2008, 09:37:49 AM
tens of MEG's? i think you are exaggerating...
perhaps you could show us just one of them? doesn't need to be running a load, just in a well lighted room, clean table, normal camera. ;)
Dont worry, dear friend, I can do it, no problem. At least four MEG?s are not throwed away. Another question is - why to show when no hoped results. Just for funny?
Or you like to see my workshop I have? Believe me - I have OK one - Im not sure you can sleep well after seen it ;-) Also you can ask Mr. George the list of ten most
bigger buyers of Neo magnets - Im sure my name could be found somewhere about first years of Millennium, now I buy mostly from Germany.
Up till ...
have a nice time,
khabe
Quote from: khabe on July 30, 2008, 10:22:10 AM
Dont worry, dear friend, I can do it, no problem. At least four MEG?s are not throwed away. Another question is - why to show when no hoped results. Just for funny?
Or you like to see my workshop I have? Believe me - I have OK one - Im not sure you can sleep well after seen it ;-) Also you can ask Mr. George the list of ten most
bigger buyers of Neo magnets - Im sure my name could be found somewhere about first years of Millennium, now I buy mostly from Germany.
Up till ...
have a nice time,
khabe
If you have working MEG's, then why start this thread?
Quote from: z.monkey on July 30, 2008, 09:50:57 AM
Howdy Y'all,
This is my version of the Hubbard Coil, the Infinity Core. It is operating in the picture, you can see the output voltage on the meter. I am still in development.
Blessed Be Brothers...
Howdy, howdy ... (I dont know exact what it means ;-)
This is nice setup! Im still trying to understand the principle and about why such like configuration. Coils & Magnets - most interesting area for me as well as most promising by my opinion.
All devices I have built myself based on the powder technology cores, O, U or E - does not matter, I can cut and get any shape I need. Powder cores because low losses - Im pedant about ;-)
Also I mostly use only high quality Litz wire - reason is the same.
cheers,
khabe
Quote from: alan on July 30, 2008, 10:28:41 AM
If you have working MEG's, then why start this thread?
Is my English really so DIY nobody can undersatand ???
I have told several time in sevaral places - up till no results :-\
At least for me "no result" means - no hoped effects :(
No - I have not working devices :P
And I will not impersonate some genius who made it :o
Im normal guy - modest one :'(
khabe
Howdy Khabe,
Howdy means hello in the Republic of Texas. I am using soft iron pipes and rods in the cores. It is covered in the Infinity Coil thread. I have often thought about using a slug made from scrap iron filings and held together with epoxy. There are lots of experiments to do. This research could easily take the rest of my life. I am starting to make some progress. Lets see some pictures of your cores...
Blessed Be Brothers...
Quote from: khabe on July 30, 2008, 10:48:20 AM
Is my English really so DIY nobody can undersatand ???
I have told several time in sevaral places - up till no results :-\
At least for me "no result" means - no hoped effects :(
No - I have not working devices :P
And I will not impersonate some genius who made it :o
Im normal guy - modest one :'(
khabe
My mistake, didn't read it well.
No-one have replicated it, I think it is a cheniere hoax to sell products, oldest trick in the books
II spoke about those cores in Topic: Hubbard coil -
when toroids then from http://www.cwsbytemark.com/index.php?main_page=index&cPath=206_217 - good enough prices and good service,
I do prefer mix No.26 - I hope you agree when checked up material properties ...
E- cores I have bought via ebay ... I bought once and huge quantity - enough for rest of my life ;-)
You can mill, drill or even shaw. I use carbide bits like this http://cgi.ebay.com/2-pc-RotoZip-1-4-SOLID-CARBIDE-Tile-Cutting-Bits-ROUTER_W0QQitemZ110275339268QQihZ001QQcategoryZ58218QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or smaller ones. Spindle makes 30.000....40.000 RPM of my CNC mill but before I used common milling machine ca 3000 rpm and rotary table - was OK as well.
Im busy with drawing for my main job - big queue of works need to be finished - I dont want to go right now and start with findings and making photos - I will do it soon.
Many years I used Autocad, few months ago was needed to go to SolidEdge - it is very hard for me. What I can do in one day with acad - it takes three days when SE .
For younger men it is easy but not for me. Every moning I start like newby - all forgotten :-[
Regards,
khabe