I have seen some replications on the forum. And some include a power supply I thought that the TPU pulled energy from the aether or from ambient energy such as RF. If the TPU does require a power source, what is a Device that does not require energy to run? But just receives ambient energy. Such as this device http://peswiki.com/index.php/OS:Ambient_Energy_Collection_Device <- I would also like to learn more about devices like that but a little confused on what board to post on about it.
Thanks for your help.
OH i didn't think about this earlier is the TPU a over unity device?
Quote from: Electrodiode on July 29, 2008, 02:19:35 PM
...just receives ambient energy. Such as this device http://peswiki.com/index.php/OS:Ambient_Energy_Collection_Device <- I would also like to learn more about devices like that but a little confused on what board to post on about it...
From the link above:
QuoteConnect up the antenna feed to the a/c side of the rectifier and the an Earth ground (15' horizontal pipe buried 6') to the other side of the AC input of the rectifier.
If you are digging down to six feet then be careful! In my own yard I witnessed a man leap from the jaws of death, out of a five foot deep trench as a wall collapsed. :o
I peed a little. I was down in that same trench minutes earlier.
Play safe.
Also, read what is here to learn more, then try something for yourself, and then let us know how it went. You will know where to post it by that time. (We like photos and details,... repeatable positive results would be an unexpected bonus.) ;)
EM Devices has been hammering away here for a long time. He may be on to something now, in fact.
Check out his latest discovery here: http://www.overunity.com/index.php/topic,5228.0/topicseen.html (http://www.overunity.com/index.php/topic,5228.0/topicseen.html)
Quote from: Rosphere on July 29, 2008, 10:38:43 PM
EM Devices has been hammering away here for a long time. He may be on to something now, in fact.
Check out his latest discovery here: http://www.overunity.com/index.php/topic,5228.0/topicseen.html (http://www.overunity.com/index.php/topic,5228.0/topicseen.html)
Yea i was looking at that earlier today. seems interesting. Yea i have many questions cause when i want to build and test something i want there to be a slit chance of it working so i basically want to put together the best of best. thanks again. But if i find something in my research that's interesting ill post it.
hi elektrodiode
and athere
YES FIRST TIME I HAVE THINKING ABOUT RF TRANSMITER AMPLIFAER <BEACOUSE I M MAKER OF THAT RF AMPLIFAERS <,
AND I HAVE ALL TIME ASK MY SELF
<<WHAT IF I MAKE 1 WATT RF AMPLIFAER AND AND PUT TO SAME FREKFENCY
AND THEN MAKE 10000000 RECIVERS TO PICK UP THE SAME FREKFENCY OF RF AMPLIFAER WHAT WHILL HAPEND DID WHILL SMOKE THE RF AMPLIFAER OR WHILL BROKE THE RF
HOW MANY ENERGY I WHILL PICK UP FROM RF <<MORE THEN 1 WATT
LONG TIME AGO I HAVE TRAED TO AND I MAKE SIMPLE RECIVER WHIT OUT BATERY W<,WHIT SMALL GERMANIUM DIODE AND COIL AND I HAVE PUT ON THE 10 WATT RF AMPLIFAER AND THEN I SEE THE SOME V AND SOME SMALL milli ampers in nthe diode
hmm but i have big problem how to make mesuring the in and out enrgy to compare that input and out put enrgy <,i dont have 10000000 germanium diode > ;D ;) ;)
if is posible to make 10000000 recivers whiyout eny input batery whit diode and make the test and see if is this posibele to pick up more then input
MY DIODE RECIVER IS PICK UP <<< 0,3 VOLT WHIT LOAD 500 ohms >.
rf transmiter is beaning clouse the reciver about 2 meters
I HAVE NO BANING THIS THEORY BUT I THING TPU IS LIKE RECIVER AND TRANSMITER
TPU PRODUCED SOME ATHER ENRGY IN THE AIR AND THAT ENERGY IS PICK UP THE SAME TPU AND CONVERT TO ATHERE TYPE ELKTRICAL ENRGY
WE MAST THINK THE TPU LIKE CONVERTER DIVICES OF ENERGY
<,TPU CONVERT IS MEAN YOU PUT ONE KIND ENRGY AND PICK UP ATHERE TYPE OF ENRGY <<NOT LIKE CLASICAL TRANSFORMING OF THE SAME ENRGY >><,ELKTRICAL TO ELKTRICAL ENERGY THAT IS NOT <<CONVERTER DIVICES >.
LIKE Steven Mark say <,my divices is not free enrgy divice but is conversion divice >
think WHAT IS MEAN WHIT THA WHEN IS SAY <CONVERSION DIVICES >
AND I ASK YOU ALL HERE ,,WHAT WE MAKE < CLASICAL TRANSFOMING DIVICES OR CONVERSION DIVICES HERE >
I DONT SEE ENY EXPERIMENT HERE HOW IS WORK LIKE CONVERSION DIVECES >.I SEE ONLE CLSICAL TRANSFOMING DIVICES >
WE MAST CONCERTRATE TO MAKE SOME CONVERSION TPU NOT CLASICALS TRANFORMATING DIVECES
THANKS
Quote from: MACEDONIA CD on July 30, 2008, 04:07:54 PM
hi elektrodiode
and athere
YES FIRST TIME I HAVE THINKING ABOUT RF TRANSMITER AMPLIFAER <BEACOUSE I M MAKER OF THAT RF AMPLIFAERS <,
AND I HAVE ALL TIME ASK MY SELF
<<WHAT IF I MAKE 1 WATT RF AMPLIFAER AND AND PUT TO SAME FREKFENCY
AND THEN MAKE 10000000 RECIVERS TO PICK UP THE SAME FREKFENCY OF RF AMPLIFAER WHAT WHILL HAPEND DID WHILL SMOKE THE RF AMPLIFAER OR WHILL BROKE THE RF
HOW MANY ENERGY I WHILL PICK UP FROM RF <<MORE THEN 1 WATT
LONG TIME AGO I HAVE TRAED TO AND I MAKE SIMPLE RECIVER WHIT OUT BATERY W<,WHIT SMALL GERMANIUM DIODE AND COIL AND I HAVE PUT ON THE 10 WATT RF AMPLIFAER AND THEN I SEE THE SOME V AND SOME SMALL milli ampers in nthe diode
hmm but i have big problem how to make mesuring the in and out enrgy to compare that input and out put enrgy <,i dont have 10000000 germanium diode > ;D ;) ;)
if is posible to make 10000000 recivers whiyout eny input batery whit diode and make the test and see if is this posibele to pick up more then input
MY DIODE RECIVER IS PICK UP <<< 0,3 VOLT WHIT LOAD 500 ohms >.
rf transmiter is beaning clouse the reciver about 2 meters
I HAVE NO BANING THIS THEORY BUT I THING TPU IS LIKE RECIVER AND TRANSMITER
TPU PRODUCED SOME ATHER ENRGY IN THE AIR AND THAT ENERGY IS PICK UP THE SAME TPU AND CONVERT TO ATHERE TYPE ELKTRICAL ENRGY
WE MAST THINK THE TPU LIKE CONVERTER DIVICES OF ENERGY
<,TPU CONVERT IS MEAN YOU PUT ONE KIND ENRGY AND PICK UP ATHERE TYPE OF ENRGY <<NOT LIKE CLASICAL TRANSFORMING OF THE SAME ENRGY >><,ELKTRICAL TO ELKTRICAL ENERGY THAT IS NOT <<CONVERTER DIVICES >.
LIKE Steven Mark say <,my divices is not free enrgy divice but is conversion divice >
think WHAT IS MEAN WHIT THA WHEN IS SAY <CONVERSION DIVICES >
AND I ASK YOU ALL HERE ,,WHAT WE MAKE < CLASICAL TRANSFOMING DIVICES OR CONVERSION DIVICES HERE >
I DONT SEE ENY EXPERIMENT HERE HOW IS WORK LIKE CONVERSION DIVECES >.I SEE ONLE CLSICAL TRANSFOMING DIVICES >
WE MAST CONCERTRATE TO MAKE SOME CONVERSION TPU NOT CLASICALS TRANFORMATING DIVECES
THANKS
I like your theory but man.. You writing is horrible.
hi all
HEY DID ENY ONE HERE IS MAKE RECIVERS WHIT 10000000 GERMANIUM DIODE TO TRAED THIS :) ;) ;)
so answer me this does a TPU require one to put energy into to get it run or just to jump start it?
hi
yes tpu is not free energy device but is conversion device ;)
Rasta I guarantee he writes better English than we do Macedonian Chet
Quote from: Electrodiode on August 05, 2008, 03:04:00 PM
so answer me this does a TPU require one to put energy into to get it run or just to jump start it?
Steve Mark claims that his TPU does not use batteries.
I have read of other designs that do use batteries much like a standard automobile uses one to get started. Some speculate that what Mr. Mark meant to say was that his TPU does not "run" on batteries and that using batteries to get it started was perhaps just another one of his secrets.
I feel compelled to point out that, much unlike an automobile, the TPU's fuel tank is everywhere, as Tesla said that it was. Upon the wheel-work of nature will we one day hook our machinery. Today is a good day to start. ;)
Quote from: Rosphere on August 05, 2008, 08:12:09 PM
Steve Mark claims that his TPU does not use batteries.
I have read of other designs that do use batteries much like a standard automobile uses one to get started. Some speculate that what Mr. Mark meant to say was that his TPU does not "run" on batteries and that using batteries to get it started was perhaps just another one of his secrets.
I feel compelled to point out that, much unlike an automobile, the TPU's fuel tank is everywhere, as Tesla said that it was. Upon the wheel-work of nature will we one day hook our machinery. Today is a good day to start. ;)
Ty now i finally understand it. The TPU need a outside power source to get started but then once its going you can loop back its output power back into it to keep it converting the energy.
Quote from: Electrodiode on August 05, 2008, 08:34:32 PM
Ty now i finally understand it. The TPU need a outside power source to get started but then once its going you can loop back its output power back into it to keep it converting the energy.
A note of caution is due. I hear that directly looping back output to input may cause an avalanche condition to occur, resulting in permanent equipment failure and possibly death. We learned to control fire at an arms length; apparently we need to be several arms away when doing any type of feedback loop testing.
One possible method may be in driving the unit with batteries while somehow charging the same batteries at the same time. Crazy.
If it was easy and straightforward, everyone would be doing it. Seems all need are more monkeys and more typewriters. :D
I hear tale of small tribes of men who know how to control this new fire. They hide away from the men of old fire who hunt them down to snuff out their works. Or so I hear. I'm a little confused.