Hey all, i stumbled this on todays quest for overunity.i cant find ant topic about it so here it is. it is beautifully simple and im sure that
it is what we were looking for.
http://freenrg.info/Filipiak/
this is the link , 10x to the guy who does this site....
if you google this inventor you can find his patent... im sure its an easy build for all of the guys here.. with their cnc machines
and workshops.. as for the synchronizer that he is talking about in his patent i believe that it is just a motor with that shaft vertical
and NS NS magnets spinning horizontally something like whats talked about in magnetic tourqe amp topic...
it is shown many times in many you tube videos and energy sites that a small rotor can spin a large and heavy rotor.
im telling you this is the one for everyone to try and repliciate.
tell me what you think?
hers the patent
http://www.wipo.int/pctdb/en/wo.jsp?wo=2007081229&IA=PL2006000002&DISPLAY=STATUS
90 ppl and not even a little reply :'( something .....
any1 out there? hello...
i am downloading the videos...
What sound codec is used, I get ZERO sound.
Looks like a nice build but without sound it's hard to work out what's said.
yeap i can't hear a thing, maybe it is meant to be like this.
no sound... dont think its a codec prob .
anyways... theres a patent link in english very easy to understand whats going on...
the big wheels connected to a big motor ,,the small heavy wheel with magnets runs inside rails in the wheels
it has 2 magnets in each row my guess is that they are 1 side S's 1 side N's when the small wheel turns it wants to go foreword so
it instead turning the bigger wheels , which turn the shaft of the motor and the output current...
the small wheel has allot of mass, when he spins by hand the big wheel the small wheel turn by the ratio of the sizes.
in front of the smaller wheel with magnets theres a part he calls the synchronizer and its made out of 2 parts the moving (turning or vibrating)
part and the magnets . lets say it a motor with 2 magnets spinning horizontally...
so , to start the machine he turns the big wheel by hand the smaller wheel picks up speed he then turn on the synchronizer
and adjust the speed so it will catch the smaller wheel. when that happens the whole system starting to synch and oscillate
and speed up... when it does the smaller motor (synchronizer) start to drop its volt/amp draw and the bigger motor which connected
the the big wheels gains volt/amp,
so simple and elegant theres no connection (lol) between the in put and the output...so
it makes more energy then it takes.... call it what you want..
I AM HOME. lol ...
3 degrees of freedom.
Anyone care to build?
Anyone care to make up a drawing of the device?
Lots of curious stuff going on here guys lately mainly in magnet motors with the exception of black light power...
Any takers any more info?
This is a really interesting concept. Has anyone learned anymore about this?
it is a simple simple device.. genius...
I'm 24 and for the last 3 years i spent pretty much all my time reading and learning everything i could , anyways i search
daily for news and ideas. its been very exciting 3 yrs... from the moment i stumbled upon a article about free energy and later\
bedini and bearden energy from the vacuum, the world crumbled in front of my eyes and from that point it has been a true journey that
lead to everytopic and every science, i don't believe who was i 3yrs ago it literal wasn't me...
i alaways knew allot of stuff about everything but i didn't know why.. i knew English before age 5 not my native ... i never knew why or how
until free energy came into my life and all those fancy words and terms that were running in my head started to be very usefully reading and hearing all the stuff i could find.. one night it all clicked and i saw the whole picture, and I'm telling you it is beautiful :) :) :)
it has been a struggle not getting anything to work, but i moved on from inventor to inventor learning everything i could about his invention
and ideas. there is another youtube video showing a guy putting together a machine it was made of 3 weights rotating in a frame.
the frame was rotating around an hallow axle, and inside there was another axle that could turn the weights by teeth gearing but the frame wasn't impacted by its turn.
any way long story Short the system had 3 degrees of freedom wights around them self's the frame around the axle and the inner axle. this is the key the most impotent thing.
all of our builds and devices have 1 maybe 2 degrees of freedom
but in nature there is always 3.. planet around themselves around their sun and around their galaxy...
this machine is precisely that!!! that is y it is not complicated no endlees calculations ,angles and magnetic pathwayes... no volt/amp
arguing these error that error it cant go wrong.
1. large diameter wheel doesent have to be heave connected to any electric motor for output
the more efficient the better .
2. small wheel heave with magnets with any arrangement the achieves movement when other magnet pass in front of
it . 90 degrees .
3. a small motor for moving pair of magnets in front of the small heavy wheel.
it is all shown and done in this forum and videos .
it will synchronize itself ... like nature... no frequency generators and oscilloscope...
just beautiful simplicity... I'm so happy. :) :) :) :) :) :)
hope i didn't complicated thing to much with my stories... it is really not complicated... I'm sure this is the real deal:
more out then in until the wheels fall off!!!!!
10x filipiak :D :D :D
Hello Folks,
There is a nice picture at the bottom of this link on this motor.
http://quanthomme.free.fr/qhsuite/nouv110506.htm
Unfortunately the link http://www.budinst.com/FILIPIAK_MOTOR worked in 2006-7 only. Here is some info from the owner of the sight, wrote in a yahoo mail group in April, 2006:
Hi,
On my website www.budinst.com/FILIPIAK_MOTOR there are available to download
photos, animations and movies of patented magneto-gravity motor. The very nice
old man - inventor - Mr Filipiak is looking for investor who will buy the
licence. Motor self running, but the previous version worked unstable, and needed
lot's of adjustments. Mr Filipiak added small motor with magnet, which makes the
synchronisation of whole device. The synchroniser consumes 7mA/7V of energy, and
can be supplied with a watch battery. The main principle is similar to the
Perendev one, but the construction is completely different. The motor requires
lot's of R&D to be ready for sale. The output power is around 10W, input power
0.1..0.2W. The rotational speed does not exceed 20 rpm.
This is all that can be found.
rgds, Gyula
looks good, we shall see what happens.
I think this is the patent:
http://v3.espacenet.com/publicationDetails/description?CC=WO&NR=2007081229A1&KC=A1&FT=D&date=20070719&DB=EPODOC&locale=en_EP
Paul.
Quote from: shablol on October 26, 2008, 02:38:35 AM
it is a simple simple device.. genius...
I'm 24 and for the last 3 years i spent pretty much all my time reading and learning everything i could , anyways i search
daily for news and ideas. its been very exciting 3 yrs... from the moment i stumbled upon a article about free energy and later\
bedini and bearden energy from the vacuum, the world crumbled in front of my eyes and from that point it has been a true journey that
lead to everytopic and every science, i don't believe who was i 3yrs ago it literal wasn't me...
i alaways knew allot of stuff about everything but i didn't know why.. i knew English before age 5 not my native ... i never knew why or how
until free energy came into my life and all those fancy words and terms that were running in my head started to be very usefully reading and hearing all the stuff i could find.. one night it all clicked and i saw the whole picture, and I'm telling you it is beautiful :) :) :)
it has been a struggle not getting anything to work, but i moved on from inventor to inventor learning everything i could about his invention
and ideas. there is another youtube video showing a guy putting together a machine it was made of 3 weights rotating in a frame.
the frame was rotating around an hallow axle, and inside there was another axle that could turn the weights by teeth gearing but the frame wasn't impacted by its turn.
any way long story Short the system had 3 degrees of freedom wights around them self's the frame around the axle and the inner axle. this is the key the most impotent thing.
all of our builds and devices have 1 maybe 2 degrees of freedom
but in nature there is always 3.. planet around themselves around their sun and around their galaxy...
this machine is precisely that!!! that is y it is not complicated no endlees calculations ,angles and magnetic pathwayes... no volt/amp
arguing these error that error it cant go wrong.
1. large diameter wheel doesent have to be heave connected to any electric motor for output
the more efficient the better .
2. small wheel heave with magnets with any arrangement the achieves movement when other magnet pass in front of
it . 90 degrees .
3. a small motor for moving pair of magnets in front of the small heavy wheel.
it is all shown and done in this forum and videos .
it will synchronize itself ... like nature... no frequency generators and oscilloscope...
just beautiful simplicity... I'm so happy. :) :) :) :) :) :)
hope i didn't complicated thing to much with my stories... it is really not complicated... I'm sure this is the real deal:
more out then in until the wheels fall off!!!!!
10x filipiak :D :D :D
The operation of this motor is difficult to comprehend. Do you have any schematics or a simplified theory of operation available?
nobody's interested?
Nothing new in this design. It is a pulsed feedback loop. He is using centrifical force to add the eclispe of magnet fields for shear effect. All here would be better off checking out Muller motor. In this design Bill has the shear face on the outer sides of the large wheel. This Filipiak design has split that into two wheels for mechanical rotation and the shear happens at 90 degree to accomodate the inside spinning deivice mechanics only.
This is a mechanical attempt with a larger number of steps at the Bedini / Muller / Hamel and especially Searl. Bedini and Muller being vertical spin while the Searl and Hamel being horizontal spin. The horizontal spin has another effect and that is the spin is 90 degrees to the earth field. That should be looked into closer.
My justification of this statement? The Muller / Searl / Hamel devices spin at a rate that will rip your hand off should you grab it. Hows that for energy?
--giantkiller. Don't be fooled by mechanical designs. The basis is always in the fields.
It Spins :o and it Flashes ::)
must be free energy i think
Well here are 2 guy's renditions. It all happened in 1996 in California.
Bedini has the coils on the periphery pointing towards the main axle of the rotor. Muller has the coils in parallel with axle at the periphery pointing towards the main rotor.
In these 2 devices the coils are focused at the same point on the rotor.
And better yet, did you know this can be done with no moving parts?
That makes it 3 to 0. Right?
--giantkiller.
first of all this design seperates the actuator circut power consumption and the wheels.
which means after the spin up the actuator start drowing less and less while the generator makes more and more inverse ratio. which is nice..
now i love bedini he is greate but his setup is for EE guys who like to calculate and masure things..
back emf front emf , radiant energy and so on and so on , is this free? what is it? white sparks , blue sparks ......................
this design is for is like nature... its mechanical its like a planet revolving around the sun. it is straight forword no room for speculations , you put little you get alot in real time.. no charging battarys
it uses simple parts... big motor small motor shaft a couple of wheels , no need to wind coils
the better the motors you use the more you will get but it will always be overunity..
from the start... when he engages the big motor/the generator it slows the big wheel but the beuty is
the when the big one tries to stop, the small heavey one crowls on up on side and the higher he gets
the more energy he gains ... when you load it it gives more... thrugh mechanical means...
and thats the beauty
no need for field equastions and all the mamabo jumbo...
simple ,elegant, natural,
just copy mother nature..
and again i have nothing against no one... i love this field....
and love all.
@shablol
Is there any schematic of the connections?
Jesus
you mean the elctronic part of it?
you can do it in all sorts of ways....
you need to brake it up just think of the first part which is an actuator.. of any kind..
example:
1} a small dc motor with it shaft upword with 2 or more magnets N S with a trigger/switch/sensor of some sort, wich flips the magnets at the right time whaen the magnets on the small hevey wheel are at the best positon the generate torque, think of pulse motor, only you dont pulse a coil
you pulse the motor which flipps the magnets which the create torque on the Small heavy wheel.
as the small wheel turns faster and faster the current/volt drow drops because it gets easyier for the motor to flipp. a little trial and error with all kind of arrangments of magnets and distances to get the best response, the most synchronized .. and again the more efficient the dc motor the better but i dont think it is that importent , i think something like a motor from a printer...
2] other way to actuate... is by vibrating back and forth small powerful magnets to cause the small heavy wheel to torque this is a very efficiant way. you can do it with a speaker, and tone/signal generator to get the most synchronzied motion ,
it is all out there look at stephan kundel motor
at peswiki... or you tube for "speaker magnet motor"
there are couple of sweet spots when vibrating faster and faster when you get to most for the least.
just need to find them for each individual setup .. expirimenting is fun!!..
this step is the "hardest part" of the setup , which of curse is not that hard, there are many ways and
alot of videos , and reading about this , the 90dgrs action between stator -rotor. , pulse motors for getting the best pulse/flip timing. reed switch, hall sensor.. and so on so on. what ever circutry yould like... :))))
s
now . when you get small heavy wheel to spin inside the big wheels, your in buisnes becaus
all you need now to connect the big wheels shaft to a big dc motor, of the torquei kind which genarats the most for the least speed the more the better...
ok now, the big motor shaft spins freely at the "spin Up" part because you dont engage it yet...
once you reach speed you turn the big motor on.. close the circut to what ever you want :
battaries , cAPS, inverter , LED,s what ever... it will want to cause the big wheels to slow down because of the load on the shaft.. BUT then GRAVITY / NATURE comes to help you , the small HEAVY wheel dont want to slow down, it has alot of of power. at the first slow down of the bigwheels
the smaller one climbs on the side , and using gravity FORCES the big wheels to spin up..
the the slower the wheels try to turn/the more load engaged. the HIGHER the small wheel climbs the more torque it produces generating more power , this is the so called secret...
this synchrones / tumblling motion , trying to reach equilibrium but it cant so it finds it one rythem
drowing less and less genarting more and more as time passes... until it reaches its peak.
it can be scaled up... and tweaked.. but im sure this is the most elegant DIY "free energy" machine
that ive seen.
hopes this helps....!!!
im on the way building one ...
LOVE and Light.
Quote from: gyulasun on October 26, 2008, 04:02:30 AM
This is all that can be found.
rgds, Gyula
Yes, this is indeed in interesting device. But I'm not sure all details are in the patent. I'm not sure that I understand how the synchronizer works.
But I would like to give it a try.
Eric
Holy shit, he has hit something there for sure.
The way that erm thing spins in the middle gives me the impression it is in harmony.
I am going to investigate further.
http://e.imagehost.org/0370/Untitled_10.jpg
Hartiberlin, why don't [img] tags no longer work, i think they used to bleh.
Quote from: shablol on October 26, 2008, 02:38:35 AM
it is a simple simple device.. genius...
Hi shablol.
So the mentioned motor is used to rotate the small heavy wheel and that the motor on the axis of the big wheel is udes as an generator? Do I understand that right?
Thanks,
Eric.
I'm also trying to figure out what those plates on the bottom in the center are? Are they induction coils? Pulse coils? Reed switches? There's no part number reference in the patent? Those plates are very close to the small rotor as well so they would have to be there for some reason?
theres is noting below those plates he doesnt hide anything....
if you understand the concept you will see it is very straight forword.
the actuator part is like a circute of a pulse motor or maybe even bedini.
This isn't a patent - it's a patent application which was denied in July 2008 because it's a perpetual motion machine. No wonder they could never get it to work.
from page 5 of the International Preliminary Report on Patentability Chapter I (at http://www.wipo.int/pctdb/en/wo.jsp?IA=PL2006000002&wo=2007081229&DISPLAY=DOCS)
Quote
The invention of the present application appears to be insufficient in that in cannot be
carried out by a person skilled in the art. A successful implementation of the invention
seems to be Impossible since lt Is In conflict to well established basic physlcal nules:
The following passages in the description
a) motor exploiting the push and pull forces of permanent magnets and earths gravity
(p.1. 1.1.2),
b) “The synchroniser needs to be supplied with electric current, the power of which is
negligible compared to the oulput power on the synchronous motors shaft’ (p.1. 1.25 - p.2,
1.1),
C) “... the motor, once started, can operate without any time restrictions†(p.2, 1.41-42),
d) “... the motor ..... works by exploiting the ..... energy of permanent magnets. ..... and
earth's gravity,
e) “The prototype generates power on the shaft ... of ..... free energy†(p.2, 1.43-44).
refer to an apparatus which allegedly generates more energy than it receives.
This is in conflict with the well established physical law of energy conservation.
Apparently, the expressions “force†and “energy’, being clearly defined physical terms, are
mixAd: (MerhanicaI) energy is defined by a force being experienced during a certain path,
Force alone will not create any energy. Energy can only be transformed into another
energy form but it can never be generated.
For instance, when exploiting the (magnetic) energy of a permanent magnet the magnet
will be demagnetised. Then however, the motor as described will no more be “operating
without any time restrictions†but rather stop.
It appears impossible to construct an apparatus which is kept moving in a way that the
output energy is greater than any input energy (perpotuum mobile).
Therefore, the applimation seems not to fulfill the requirements of Article 5 PCT, which
consttutes a deficiency which substantially cannot be overcome.
lol....
you are pathetic.
10x for bringing my post back up...
with much love. i will
start the day with a smle.
Quote from: shablol on December 23, 2008, 12:07:32 AM
you are pathetic.
That's pretty funny coming from someone who doesn't know the difference between a patent and a denied patent application.
Quote from: wizardofmars on December 23, 2008, 01:34:19 AM
That's pretty funny coming from someone who doesn't know the difference between a patent and a denied patent application.
In shablol's defense, 1.) he's an L2 English learner and 2.) the patent office dismisses summarily anything claiming over-unity. I'm willing to be there was zero attempt to assess the contraption.
Cheers
Quote from: magkor on December 27, 2008, 09:07:42 AM
In shablol's defense, 1.) he's an L2 English learner and 2.) the patent office dismisses summarily anything claiming over-unity. I'm willing to be there was zero attempt to assess the contraption.
I didn't criticize his English. But if he is going to claim that a patent demonstrates anything, he should learn the difference between a patent application and an issued patent. By the same token, I could argue my own overunity theory involving beer and pirates must be true because I paid for it to be published by a vanity press.
@all
I did not want to say anything yet, but I am having a tremendous success!!!!!!
http://www.overunity.com/index.php?topic=6362.msg158838#msg158838
Jesus
Quote from: shablol on October 25, 2008, 11:31:26 AM
Hey all, i stumbled this on todays quest for overunity.i cant find ant topic about it so here it is. it is beautifully simple and im sure that
it is what we were looking for.
http://freenrg.info/Filipiak/
this is the link , 10x to the guy who does this site....
if you google this inventor you can find his patent... im sure its an easy build for all of the guys here.. with their cnc machines
and workshops.. as for the synchronizer that he is talking about in his patent i believe that it is just a motor with that shaft vertical
and NS NS magnets spinning horizontally something like whats talked about in magnetic tourqe amp topic...
it is shown many times in many you tube videos and energy sites that a small rotor can spin a large and heavy rotor.
im telling you this is the one for everyone to try and repliciate.
tell me what you think?
hers the patent
http://www.wipo.int/pctdb/en/wo.jsp?wo=2007081229&IA=PL2006000002&DISPLAY=STATUS
So the small spinning magnets is generating power in a coil. The two big wheels is driven by a motor at 12V and 10mA, and the small spinning wheel is delivering 6V at 0,4A? If I read the multimeters correctly. What red LED bulb can handle 400mA at 6 volts without litting up the whole rom, or going into smoke in an instant?
Br.
Vidar
Hi Vidar,
We do not know where the red LED is connected but I do not think the red LED is the main load at the output. In fact if it is connected to the output, its consumption is negligable to the shown output electric power of about 2.4W.
In the patent Filipiak claims about 10W mechanical output power measured on the shaft.
rgds, Gyula
Quote from: nievesoliveras on February 20, 2009, 10:31:30 AM
@all
I did not want to say anything yet, but I am having a tremendous success!!!!!!
http://www.overunity.com/index.php?topic=6362.msg158838#msg158838
Jesus
How many threads are you going to hijack. I have seen this about 5 times on differing posts.
Quote from: mindsweeper on February 21, 2009, 03:26:32 PM
How many threads are you going to hijack. I have seen this about 5 times on differing posts.
Pardon me, but it was that last year I posted on this thread and the other threads and I sent the post to all the threads that were on a page called show replies.
I twas not my intention to bother you. Accept my apologies.
Jesus
Quote from: nievesoliveras on February 21, 2009, 05:07:17 PM
Pardon me, but it was that last year I posted on this thread and the other threads and I sent the post to all the threads that were on a page called show replies.
I twas not my intention to bother you. Accept my apologies.
Jesus
It was posted on Feb 20, 2009 : as were the rest.
But what does it matter, keep up the good work.
Quote from: mindsweeper on February 21, 2009, 05:20:21 PM
It was posted on Feb 20, 2009 : as were the rest.
But what does it matter, keep up the good work.
Thank you @mindsweeper !
Jesus