Hi All,
After viewing some videos on YouTube uploaded by NRGFromTheVacuum "Free Electrical Energy 1 & 2". I was very inspired to look into the original of the concept that shorting a dipole results in more energy from the vacuum.
I found 2 documents that helped to clarify things for me.
1. A Practical Guide to Free-Energy Devices
Chapter 5: Energy-Tapping Pulsed Systems
http://www.free-energy-info.co.uk/Chapter5.pdf
2. Apparatus For Producing Electric Currents Of High Frequency
And Potential
http://www.keelynet.com/tesla/00568176.pdf
My goal them became to understand Telsa's patent enough to be able to make a simple schematic diagram as the mechanical drawings are difficult to assimilate with out careful review of the patent's text.
The results are attached.
My greatest alteration to the basic system was to use Bifilar Coils in place of 2 toroidal chokes.
All the aspects of the invention are there...
1. A Dipole/Battery producing DC current.
2. A switch that shorts the Dipole.
3. Chokes that capture the energy spike resulting from the moment of reverse entropy manifest by shorting the Dipole.
4. An Oscillator that motivates the switch at high speeds forcing reverse entropy to manifest with frequency.
5. A capacitor and inductor configuration that results in a tank circuit that may resonate and boost voltage.
6. A transformer action that manifests the Radiant Energy at the Output terminals.
It also seems to me that the dipole might be recharged by back EMF resulting from the inductors release of charge captured during the short. Now we have all the fix'ins for a Radiant Flashlight that never needs new batteries...
I've always wanted to see a simple slap it together circuit that manifests Radiant Energy. Then we can say, "Cool! That's Radiant Energy Man!"...
Well, here's the concept. Let me know what you think.
Later,
-Dogs
The scheme is a simple inverter! ::)
Leo48
Quote from: leo48 on October 27, 2008, 08:08:37 AM
The scheme is a simple inverter! ::)
Leo48
There similarities, but it is not the same as... ::)
-Dogs
http://en.wikipedia.org/wiki/Power_inverter
After some experiments using a single NPN switch, I have come to the conclusion that
I am actually trying to create a short between 3 terminals at the same time.
- A short between a battery (w/Choke as a load) [battery-] [choke] back to [+battery].
- A short between same battery (w/Cap as a load) [battery+] [ +cap-] [choke] [-battery]
The three terminals that need to be shorted are:
1. [battery-] [choke] [terminal]
2. [cap-] [terminal]
3. [battery+] [terminal]
This would require 3 switches controlled in in synch.
I'm looking to be able to charge up a capacitor that has a higher potential than the input (battery or power supply).
Put a load on the cap, and be able up continue to supply a load that requires
greater voltage and current than the input produces.
Do you think it will work?
-Dogs
cant work
lost of basic experience
GP
Hi!
I had a similar idea but with just one transistor.
Jesus
Quote from: nievesoliveras on October 29, 2008, 02:33:07 PM
Hi!
I had a similar idea but with just one transistor.
Jesus
@pese, Thanks for the input. If my test fails, I won't feel so bad.
@nievesoliveras, I did try a few flavors of a 2 switch circuits, unfortunately with no results.
I did get 3x higher Voltage readings (oscoped) at one point, but the circuit
did not seem to be charging the cap.
So I think that I only got the short going between the Power Supply and
the Choke right. But the part that sends all of that energy into the cap was not
quite there.
I did not make schematics of those circuits.
If you get a chance to try out your circuit, please let me know about the results.
Best,
-Dogs
I have made a correction to my second circuit to fix the polarity of the connection between the Choke and its Transistor Switch.
The main problem that I can see with this circuit is that the transistors rectify the energy caused by the short. This may cause a loss of the energy spike that accompanies the shorting of the circuits. This would not happen in a mechanical switch or a JFET type transistor. Any how, it will be interesting to see what happens.
-Dogs
Hi!
I am just waiting for the parts I sent for. As soon as I get the parts I will make the tests.
Jesus
The scheme is a serious mistake on the transistor polarizazione Central!
leo48
...Dup Cut...
Wow, looks like a simple radiant energy device already does exist in the "Imhotep radiant oscillator" as researched by the folks on energeticforum. Looking for a Simple Radiant Energy device? Just Google up "Imhotep radiant oscillator".
http://www.google.com/search?q=imhotep%20radiant%20oscillator&sourceid=groowe&ie=utf-8&oe=utf-8
I can see this radiant oscillator device using a few car batteries working in concert with HHO generation for all the needs required to uplift societies that are in need.
I think that the first inkling that I saw of using a CFL for low power lighting was on sirhoax's youtube channel ( not sure if it was hit video or a favorite). The main concept in the video was the (important) discovery that using pulsed frequencies, almost the same full brightness was acheivable from the bulb, but at a much lower amperage. Imhotep's circuit take this much further using a self oscillating circuit and an ignition condenser coil to produce radiant energy, thus recharging a battery while producing light. With which we may continue to be productive into the wee hours of the night (this in itself is very important to a culture).
Does the circuit achievable a Free Energy status?
1. Fully charged Battery
2. Dead Battery
3. Charge Dead Battery to full charge using Fully charged battery only.
4. Is there still charge in the previously fully charged battery after the Dead Battery has been fully charge? If so, you have your answer. And if it can do this whilst producing light? Even better!
Best,
-Dogs
Quote from: Dogs on October 29, 2008, 04:19:58 PM
...
@nievesoliveras, ...
If you get a chance to try out your circuit, please let me know about the results.
Best,
-Dogs
I receved the parts I was waiting for. I built the circuit and the expected results did not show up. The circuit does not give radiant energy when the capacitor the coil and the positive terminal are joined together a microsecond by the transistor. What it does is that when the transistor closes the capacitor gets shorted and emptied, instead of filled or charged as I wanted.
Jesus
Did NRGFromTheVacuum ever post the modifications he made to his laser drive(does he mean a DVD drive or something like that?)? That appears to be the only thing he didn't share. In the video where he puts the lit bulb in the glass of water, his circuit seems simple? Was it not simple to replicate?
Quote from: Dogs on November 01, 2008, 06:32:23 PM
Wow, looks like a simple radiant energy device already does exist in the "Imhotep radiant oscillator" as researched by the folks on energeticforum. Looking for a Simple Radiant Energy device? Just Google up "Imhotep radiant oscillator".
Also here on pages 6-19 and 6-20
http://www.free-energy-info.co.uk/Chapter6.pdf
I think my relay is running too fast; the coil does not charge
up much, and the discharge spike is consequently smaller.
It does seem to desulphate batteries but charging has been
patchy so far.
Paul.
I think you should check out the book "The Free Energy Secrets of Cold Electricity" by Lindemann. He takes Gray's circuit patents and Tesla's radiant energy patents and corrects them using Bedini's corrections and some book on HAARP. It is a bit above my head, but you might be able to make something come of it. You can read it on scribd. That's where I saw it. From what you say, I think that he provides a solution to your problems.
@timmy
Do you have the link? Can you post it?
Jesus
this looks interesting
http://ca.youtube.com/watch?v=b34razBqYKc
Quote from: timmy1729 on November 29, 2008, 01:51:59 PM
Did NRGFromTheVacuum ever post the modifications he made to his laser drive(does he mean a DVD drive or something like that?)? That appears to be the only thing he didn't share. In the video where he puts the lit bulb in the glass of water, his circuit seems simple? Was it not simple to replicate?
I don't know the exact modifications that he made to his laser, but I remember that I read somewhere that he turn his laser into a NEGATIVE VOLTAGE GENERATOR.
Maybe this info could help you.
Quote from: timmy1729 on December 02, 2008, 09:17:25 AM
I think you should check out the book "The Free Energy Secrets of Cold Electricity" by Lindemann. He takes Gray's circuit patents and Tesla's radiant energy patents and corrects them using Bedini's corrections and some book on HAARP. It is a bit above my head, but you might be able to make something come of it. You can read it on scribd. That's where I saw it. From what you say, I think that he provides a solution to your problems.
Yeah, NRG has read a lot of good stuff... I know he has read about Tom Bearden and the The Free energy secret... book. Maybe he has read 1 or 2 more, but his theories are from these books. Of course, and a few of intelligence.
The Book on HAARP maybe is 'Angels don't play this HAARP'
Quote from: timmy1729 on November 29, 2008, 01:51:59 PM
Did NRGFromTheVacuum ever post the modifications he made to his laser drive(does he mean a DVD drive or something like that?)? That appears to be the only thing he didn't share. In the video where he puts the lit bulb in the glass of water, his circuit seems simple? Was it not simple to replicate?
He doesn't explains the modifications in the video, but in the comments you can read
Laser Drive with positive ground and negative voltage. I know how to make the positive ground, but the negative voltage... I don't know. There are some schematics in the net about negative Voltage generators, maybe it's a fussion of negative voltage circuit with a laser drive.
Quote from: nievesoliveras on November 17, 2008, 06:49:01 PM
I receved the parts I was waiting for. I built the circuit and the expected results did not show up. The circuit does not give radiant energy when the capacitor the coil and the positive terminal are joined together a microsecond by the transistor. What it does is that when the transistor closes the capacitor gets shorted and emptied, instead of filled or charged as I wanted.
Jesus
You need to replicate the exact device. There are not secrets. The guy shows the negentropy process. When we connect in the common way a dipole to a device, we're dissipating energy because we're drawing current. Current is the enemy. If you draw only voltage, we will have an infinite battery. He uses a bifiliar and the battery as the resistors because in the negentropy process resistors amplificates the energy. In entropy process (common process) resistors scatters the energy.
Naudin's Longitudinal test circuit on the following page looks simple enough to build:
http://jnaudin.free.fr/html/lmdtem.htm
LMD (Longitudinal Magneto-Dielectric)
Could be used to further our research.
It appears he built this from an old video on Longitudinal wave which built it as modules.
I don't see why the 2 inductors which are right next to each other couldn't be replaced by one inductor.
I tested this circuit setup in a simulator and got good results from doing so.
The capacitors could be replaced by Leyden jars, and we can wind our own inductors.
Unless we have a good source of HV capacitors then buying the parts would be more accurate.
The cheapest Leyden jar idea is using 2 lit. pop bottles filled with salt water and wrapped with Al. Foil.
One lead goes into the bottle and the other to the foil. (should say salt water capacitor)
The capacitance can be adjusted by raising and lowering the water level.
The inductors can be built with hollow cores so we can insert some iron to change the inductance slightly.
Quote from: Magnethos on December 23, 2008, 04:18:48 PM
He doesn't explains the modifications in the video, but in the comments you can read
Laser Drive with positive ground and negative voltage. I know how to make the positive ground, but the negative voltage... I don't know. There are some schematics in the net about negative Voltage generators, maybe it's a fussion of negative voltage circuit with a laser drive.
How do you think you change to a negative charge? He reversed the diodes its really simple you dumb ass LOL
Now the positive is ground and the negative is -6000 volts respect to the ground. When you put a load on it via the earth then the earth will refill the cap BACK TO ZERO. (As light bulb connected via radiator pipe)
It is the correct way to power things but since they stopped making cars positive earth everything has been built backwards for last 50 years.
You can only do this using floating battery supplies or use floating inverters! Don't believe me then go watch the video 3 more times. This is heading towards Don Smith domain.
Quote from: Dogs on October 27, 2008, 06:40:04 AM
I've always wanted to see a simple slap it together circuit that manifests Radiant Energy. Then we can say, "Cool! That's Radiant Energy Man!"...
Well, here's the concept. Let me know what you think.
Later,
-Dogs
@Dogs
A question?
Would a relay energized by a square wave oscillator work instead of an opto-isolator?
If so, it looks like a design hartiberlin (Stefan) invented in a different configuration. There's a posted drawing of it on this site, but it's deep in the background of threads somewhere.
I remember it, though. Looks about the same. I might look for it later when I have more time. Got to go.
--Lee