http://www.westfield.no
they got pics/videos too...
You know, why not build a experimental version of that one useing 100 (or 200 grams - for each ball) to power lets say 250w?
go get used to the ratios and al that.
OR IT Could get convered into a Water wheel type. ;-)
or use Sugar .
Building one of these gravity motors will surely be cheaper than building a Magnet motor, but then again a magnet motor has more use as a car engine :P.
ill be likely to build one of these to power my computer,just look at how simple the design is , and if i did i would certanly post a video ; prehaps live.
just to annoy the Talimudic Satanists and really i would care less if this Crude animal body im wearing dies, it gets annoying when you have to eat , drink water , sleep , toliet..
and that is all it does.
and then its a worthless lump of meat , btw we are all Equals (Us Males).
this world is boring ;-).
then again there is billions of us and we don't need them , but they need us , because they are parasites , they kill us , but they are so dumb they cannot even see that the whole WORLD IS GOING TO END, - by divine intervention.
how can Destroying everything be Properous?
we need Nature , we are living our lifes all wrong.
and they reakon they are going to have an immortal Life after this life?
they Forget that they are Enemys to the Ruler of the Universe , and he is Going to kill those who aint learned to be Good enough.
the only thing is with this design is , is the over lapping ball that goes up has to be at the right place at the right TIME, and it has over 50kg of force to push it up, CAN YOU GUYS SEE THAT AT LEAST , COME ON GET RID OF THE Arrogance,
To be honest I don't think that machine will ever work.
Sorry to be a party pooper.
But that said, who am I?
Yesterday I spent quite some time wondering if this gravity powered machine would work, or any gravity powered device for that matter, (there seems to be alot of drawings and ideas out there on the net)... Unfortunately I'm not very good at visualizing things, so I'm not so sure. However my friends simple calculations show that it wouldn't work :-\
This would be great as a car motor ;-).
http://optionalreaction.com/articles/ghd/
btw tink that is like saying a adams motor don't work ;-).
as long as the top balls is in time then it Works , simple enough isnt it?
its got a brake to control the fall speed and plenty of power for the gen and the reloader.
im thinking of replicateing the helix drive useing a bean can , hey why not? (but i aint going to patent it,so don't worry about your Money,because its only paper)
how do you know the gears ratios?
hmm?
i see it has the potential to work ,
because if you get the gear ratios right then the right side will obviously go faster then the left and the brake - CONTROLS THE SPEED.
that is like saying the clutch system (in a nother forum) don't work..
actually you could adapt this to work as a clutch system.
I Do now think its possible to get a Fully gravity powered motor, imagine a ton of steel falling non stop and use that as a motor.
im thinking of rotars and the helix drive is the closeist thing to that.
(that gravity motor i been talking about adds weight, but the helix loses weight)
+g and - g.
ever spun round with a Ball ,object , i feel the up and side ways and it some how the ball feels lighter. (and i feel like im somehow spining faster and then i lost balance and fall down..) and when i give a push i speed up more and then slows down while MY ARMS ACHE..
what do you think?
:-P. hah.
and what about that discovery program about a russian air liner that exploits this Non gravity effect , and its like Space and the air craft is like pointed (if i can remember) something like 45 - 65 o
if you think that motor won't work then unlikely you will find that this would work, and you would then find unlikely a Magnet motor won't work , but really ITS EM ENERGY.
that helix design is so easy to copy.. to slow the ball you have to move it out wards ( a small tire Accelerates faster and SPINS FASTER DOESNT IT?) AND A BIG Tire spins Slowly, WHAT ABOUT Planets eh?
this is a Example of a - Gravity system , and it works like the Gear RATIO SYSTEM Of the Norway design. But the Helix is ALL IN ONE!
THE INNER SPINS FASTER THEN THE OUTER WHICH MEANS THAT IT WORKS OKAY?
The Gravity motor which moves the bottom to the top, WHY CAN'T YOU GUYS SEE THAT. (norway design)
its the same for the Helix and that is a way for a gravity motor to 'Self run' closed Loop.
why don't you spin with a object for instance a ball with your Arms out, sheesh.. now who don't belive in self running gravity systems, just looks at the weather system ...
it has a Connection with Vortex and Negative energy okay?
http://world.std.com/~mmcirvin/gravity.html
the inner spins faster and FASTER, can you see it yet?
This thing is with this helix design is , you need to know what weight it needs (you just can't use Blue tack), it is base on the 90 rule.
You need the right measure ments, the right weight .(it doesnt need to be perfect ether its gota be light or heavy , i reakon light , its gota lose weight)
and there you have it , the 90 bars are somewhat away from the main body.
that shouldnt be to much of a problem ether its got be heavy or lighter then the main body.
http://img501.imageshack.us/img501/7338/pic6ko.jpg
the 90 degree rule!
well it does work, it needs to be tested etc like as if you was new to lets say building a magnet motor.
many times over to get the best performance.
what im on about is a flow of Weight when it Spins,
like a twister.
and that flow of weight hits the slower outer (ball) circle and thus , OVERUNITY.
if only i wasnt deprived of metal, well looks like ill be makeing one outa wood.
and shape it.
i think this design is worth all the effort.
as for the belt which holds the balls outward should weight tiny. (plastic prehaps)
unless you use your self and put 90o Bars over you ;-).
plastic would be alright as 90 bars to.
ill explain how the 90 bars work , the negitve gravity effect travels to the outer rim of the bar which CAUSES The negitive gravity effect and the ball completes it thus , OVERUNITY.
Guys get your reasoning processes working and stop useing science lol!
the inner has be very simular in weight to the bars. (or the same)
Overunity!
negative gravity.
or the inner would be simular in weight to the bars and the balls would weight NEGATIVE,
I Think that makes Sence now
just like the minato motor (WITH THE MAGNET Power as the unbalancer)
(God's helping me by the way )
the inner spining , must weight the same as the bars . and when the inner SPINS Faster then the Bar , what do you think , and the ball weights Erm lighter?
overunity?
and all that power hits the Lighter ball, aint that unbalanced and produce overunity?
like a fallen ton of steel not stoping?????????????????????????????
and the lighter ball provokes the cone to SPIN EVEN AND MORE FASTER,
and that extra spin makes the Ball even lighter..
because the bar must weight almost exactly to the main body (as the main bodys weight is spread) the bar is concenrate and thus hits the unbalanced force , and which makes it more un balanced and causes it to SPIN MUCH FASTER.
because if it was HEAVY Then the unbalanced force wouldnt out match the heavy, so it must all be very Simular in weight (grams or miligrams)
it doesnt matter wether its 10 tons it still have to equal very simular in weight.
i think makeing One of these Out of Plastic would be great as a tester and it would be cheap to , and useing it to experiment.
the flow of weight has to be right ;-).
so the 90 bars have to fit properly on the size of the main body , (whatever that is)
(u know what i mean). Measurement calculations.
because when you start it , the weight goes to the unbalanced ball and the unbalanced balls speeds up the main body and since the main body weights more then the ball it weights more heavy due to spining and that heavyer force makes the BALL MORE UNBALANCED.
This motor works people.
unless yr blind as a bat.
actually Thx Guardian Of Divinity - God , he helped me. (the Source of everything)
does that make sence to you guys now ;-).
as for the bars ( the lines that connect the 2 parrelle bars..well )
thats something to experiment with.. that is what distuributes the gravity power.
it doesnt matter to much if it aint perfect but both sides have to be the same to.
and that gravity power hits the ball at 45 degrees.
(ever watched discovery when the russian liner flys at a constant 45o and every body experiances No gravity??)
---
actually for the bars , they work like FLUX Lines .
it doesnt matter wther they are 1cm long or 3 cm long as long they are equal both sides to disturbute gravity power.
id go with 3cm.
,
IN THE HELIX PIC It seems they use a pattern, well its good to Experiment, try 1 line each 3cm ( get it equal depending how long the slopeing bars are.)
Thx God for the Spiritual Food , Not me.
(Oil of understanding)
to get You guys thinking ;-).
don't work with the right side of your Mind, Listen to the left side ;-).
Hope your inspired now :-P .
i could of written this better , but hopefully you get the big picture.
think of it like the Minato wheel .
like when you spin round a circle all the force GOES TO THE SIDE.
Which makes the ball moveing slower then the inner , LIGHTer then its average Weight.
which causes a turbine effect.
its works out that it will be UNBALANCED (Won't be able to stop and keep on spining untill it flys away ;-) )
or you could use a lighter ball or a heavy ball to see what works better ( but the main unit has to be equal in weight(or difference in Milligrams), and the bar is the force pusher).
or use a ball simualr in weight to the machine.
if you think it don't work then place your arms at 45 o and use a light object and spin around, until the force makes you collaspe.
(don't judge unJustly)
it doesnt matter which way it turns.
and i havent seen the real thing working ether but since my reasoning process is working i can see how it Works. (Spiritualy with my Spirtual Eye Sight , in the Unseen)
but i have seen it working on the internet ;-).
Faith Conquers fear.
Knowledge replaces ignorance of Arrogance.
The Gravity flows into the tubes and across to the outer, it travels from the spining inner cone, which hits the unbalanced force. (which you start it by your hand and it speeds up)
which spins more faster which means it weights more and all that force travels to the balls which make them even more unbalanced.
and the cone gets More heavey and the Balls get Lighter.
and it speeds up to Kingdom Come.
the less weight balls then transfer that energy to the lower , tubes.
Get it????????
IT IS A DESIGN THAT WORKS.
that is a true self running gravity MOTOR.
the Norway motor WORKS TO, And who said it doesnt?
okay as the inner gets faster then the outer , the inner has to be the most heavy then the tubes then the thing which holds the ball and then the ball.
you could do it that way.
or have the tubes , inner, and thing that holds the ball all equal or very simular in weight and only the ball the odd one out.
needs experimenting.
but it does work, because the site doesnt have WEIGHT MEASUREMENTS.
(SOMEONE Didnt want this technology commercial well, you can always make one outa plastic and give away :-P )
for eclectric generation etc,
im not the person who invented this, Technology comes from God.
im shareing the way i see it.
being explained By God .
http://www.rexresearch.com/minato/minato.htm
his design ( all the weight is even) the driveing force is the magnet ,
SO WITH THIS Self running engine , its the Ball which weights less then it should do.
is where the Magic happens..
it doesnt matter wther the Engine is 50 grams or 100 tons, it can still run , just different torque.
and all the power goes into the uneven spot ;-). (speeds up much faster)
and i reakon you can extrac power from it
as for the balls well , use cup holders ;-P.
(something to keep them in Place , lock them in for instance).
so they don't fall out, well it would affect the performance a bit but i prefer that ;-P
or use glue
or tape.
i think the ball would have to be the same weight or even lighter (prolly have to experiment around with that).
the device needs fiddleing around with , (but the weight must be the same).
sigh..
Replicateing is fun eh?
:-).
you now see it hopefully, (this is a nother way of extracting em energy ,)
well every bit of it would need to be equal(in weight or simular in weight) because the Fastest part is the more Heavy!
which is why i think he used balls in stead of something else,
and all of that heavey force goes to the least weight ( ball)
and that CAUSES Unbalance .
and that negitive energy goes back into the fastest spining Part!
ITS ACTUALLY EASY To make one of these, id start with plastic. (because its cheap and would be strong enough... hopefully)
to gain knowledge of this machine.
and measure ments . etc etc..
........
We are deprived of machinery!
i think the best way to get better performance is,
the inner (cone) will be heavyist then the bar and then the holder and then the balls.
which will create some serious counter- gravity effect to produce spin,
or you could do it all equal ...
id go for the one where the weight decreases.
because all that negtive power goes back into the heavy spinner (back to the cone , useing the bars).
Simple!
when i decide to make one of these i will post results and building tips. (and im actually Likely BUT not very likely, to build one.) i aint got the tools you see..and not to much patence..
so let this clear the confuseion , and its not running on air ;-).
this well have some design tips but i just been explaining how it works to the uniformed.
sorry about the many posts, i kinda got carryed away ......
i wonder if it could be converted into a water gravity powered wheel ;-).
or stick a telsa turbine in the middle of that Tube , Bahaha!!
YOU Could actually wind coils around it with magnets , so you wouldnt need to plug the kinetic force into a generator for instance.
They call me deranged. The hope is that they are right! It is of no greater or lesser import for yet another fool to wander this Earth. But if I am right and science is wrong, then may the Lord God have mercy on mankind! ... How else should it be done then?, was always the immediate question. The answer is simple: Exactly in the opposite way that it is done today!
this 2 : 1 gravity effect can be used in many Designs you know.
This wont work. If you would like to get 1kg steel ball at the same high were it starts from, you need for right timing (means the ball has to be up again before or just when the next ball on the left touches bottom) at least a 1:7.1 gear, wich also means 1:7.1 power = 7.1 kg on the left. I you only have 7kg on the left, nothing will happen. A gear not only speeds up the transport, it also takes more energy (exactly the same amount more energy) to do this...
Sorry.
yea the norwegian design .. it can't run on its own.
anyways there is lots of designs you can put this into , which doesnt need the ball to roll.
but the norwegian design will Defanitly run on a 2kw ELECTRIC MOTOR, to restart the Process and thus produce more power then that put in, 2kw for erm over 10kw !
the helix design is sucessful it sorts out this stupid rolling ball thing. , its instant.
you can always speed up or slow down the motor ;-).
wheres you faith in this vortex gravity technology?
and if ye doubt the helix gravity then please doubt the minato wheel ;-).
and the other Pmm.
telsa coils,
do i need to say more?
anyways im thinking of building one of these http://www.fuellesspower.com/Paypal/earth2.html , to power one of these > http://www.ogormans.co.uk/electric_heaters.htm .
i aint a mechanic.
115 volts, i think that could actually produce over 1kw eh?
dunno about the amps though.
or at least 300-500w.
unless there are multiple.
Daniel are you okay?
Who are you working for?
NSA?
i work for nobody,
anyways it should not take long to figure out how to break ather waves.
im going use Nails (in a row of 10 x 10 ) with paper clips (on the tops hooked) and see what happens,
hey , you can see the 'invisible energy' when you close your eyes, its colour is blue and it has nothing to do with your human eye sight.
You are right, i see it - but wait, isn't it sunlight going through my pulsing venes?
mh
its em energy , can you see that?
i think ive got an idea of a way to replicate the telsa vaccum electron Tube.
since no where on the internet , (did a quick search) does it ever Clearly explain how to get one of these running.
But SINCE YOU CAN PUT A WIRE 2000-4000 FEET IN THE AIR AND YOU GET Enough power - volts because it gets closer to the magnetic power of the earth,
and since the volts down here NEED Boosting, like a radio Booster,
-----------------
http://www.keelynet.com/interact/arc_1_99-4_99/00000272.htm
Tesla found that the energy peaks at 12 Hz, 500 Khz and their =
harmonics. That is why I mentioned 12 Hz. I had once thought that Tesla =
used the vacuum tubes because he was using aether, but after looking at =
some of his other writtings and experiments with this electricity, it =
seems as though he built the box to increase the current of the =
electricity. I'm sure that this is possible and had I a better =
understanding of vacuum tube technology I would try to explain this in =
more detail. The reason I believe that his box was in fact built to =
amplify the current of the electricity is because Tesla had already =
conducted similar experiments as Jerry Gallimore had and had the same =
trouble that Jerry Gallimore had with a weak current. It is therefore =
only logical to conclude that Tesla used this same atmospheric =
electricity. This is not only indicated and supported by Tesla's notes =
and diagrams, but his methods resemble the later experiments of others =
like Jerry Gallimore to such a degree that it is silly to conclude that =
they were not using the same kind of electricity and obtaining it from =
the same source. All Tesla needed after tunning in the peak voltage =
frequency was to increase, or amplify the current by some means. That is =
why I believe that Tesla built the converter box not to convert or draw =
power from the aether, but to amplify the current of the electricity =
that he was recieving from the atmosphere. =20
--------------------
hey why not try your cloth hanger that would be a pretty good ariel to test to see if you get any Volts which would be likely Anyways.
So with this all you need is a rod and a tube to accelerate and ampify the electric signal thus geting More volts(like a radio, even see patents where they get electric from a radio??????????), which is easy to see aint it?
with a bit of fiddleing about we could get a telsa electron amplifyer, because you do get volts in the air , and this Amplifys THOSE VOLTS.
as we know ( and 4 billion of the population dont.)
it just needs to figure out the circuit , but AC ELECTRIC Is flexible .
why not stick a rod in a vaccum tube and place 2 wires(to the ROD or 1 to the tube and 1 to the rod, or completely to the vaccum tube) and then connect it to a Bulb.
;-).
IF THE BULB DONT MELT .
i think the only reason why he used resistor is because the circuit would of Fryed, with all those Ether volts..
or why would of he used it?
Probably a help:
The first point:Prof. Ehrenhaft and his magnetic current explaination.
The second:we ,the humans,can not remark free U/IR-Radiation,
a radiation without temperature !
But when this radiation has not temperature ergo this radiation has(would) not (have) movement!
(Maxwell/Boltzmann)
Which is the source ?
www.geocities.com/theadamsmotor/joeflynn.html :
the PP Egroup experiment(figure 4)
www.wbabin.net/sukh/paradox.htm :
THE PARADOXIAL WORLD OF THE THEORY OF RELATIVELY AND REALITY
What seems physical logical must not seem psycho-logical ! or vice-versa !!!
Thx for the link,
i really don't like to work with Science, i rather like to work with Knowledge and how things , Really work in Nature.
my Knowledge is very Limited in the field of overunity(im new), but i had just enough to figure out how the helix would possibly work.
because the inner spins faster and thus more heavey, which was easy for me to understand, but for me to understand how a richard clem motor would work , is actually hard for me but these are the same principles.
(unless it ran on air.)
the Shortest distance is in a Straight line, so lets look at things as they really are.
someone needs to build this to actually get some results
The real mechanism will not only be claiming to be free energy, it will be perpetual in nature, as well as infinite in it's form and function.
It is Unity by it's very form alone, over-unity, and anti-gravity all in one simple mechanism.
Mathematics will never find it. it's based on intigers unworkable in mathematics but is a simple mechanism. it will soon be patented under superconducting rotary toroidal transformer. As the inventor the initial problem i set out to solve was, How to put multiple magnetic flux fields through several induction coils cyclic indefinately. which was the problem with induction.
Solving the problem required innovation in 3 fields of interest.
#1. DC motors and electro motive force. the innovation was the armature was completely redesigned which brought innovations in engineering of the armature solved through design. the innovation it's self is a multipole toroid armature. which is supported and driven by magnetic bearings also known to have a cooling effect.
#2. Flywheel energy and storage. most flywheel energy devices are robbed of potential by friction. the toroidal form is ideal for frictionless magnetic bearings which renders the flywheel form as 100% frictionless.
#3. Induction. The innovation is driving multiple magnetic flux fields through induction coils. Achieved by a multipole toroidal armature spinning at extreme rates through several induction coils.
the simple process is fully multifarious.
Mankind fails to even get into the game of thermodynamics falling short of the criticle transformation of energy.
Example: fuel to kinetic energy which the work is used to move your butt to work.
The ideal set of transformations is elec to kinetic to elec. Going full circle useing the work to transform it to elec energy to feed the first transformation. this is not free energy there is no such thing, however it is low cost, self renewing energy. the toroid flywheel will require a minimum of energy to maintain at any conciderable rate regulating the input from the output elec.
This mechanism is stand alone not for use on the grid. However if you concider most devices such as your computer runs on less than 12v DC stepped down from AC which is only nessicary for transporting elec a distance. You must also understand ANYTHING running on fuel can be run on elec AC/DC.
Not complete or perfect but in the process of building it. I've been trying to find proper componants for many years they simply don't exist "yet".
This is a low budget operation so i cannot afford to pay for retooling to get "as designed" componants.
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.terrylhewettsr.rackhost.net%2Fimages%2F%21centipedalfieldringsm.jpg&hash=fcb53721a446d3bf306763041c0533b5b57a6452)
Above image is of the fields that the ring consists of. the green film is magnetic reactive and shows the fields present. however their are extra flux fields that are imposed on as they enter the drive coils and will flux back out to excite the induction coils. 4 induction coils will be wound around the prototype and target rpm's are 50,000 that's in comparison to a faraday flashlight shaken 8,000,000 times a minute. This mechanism Is faraday's principles RUN AMUK. Two of faradays principles are used in this invention. Electro Motive Force and Electromagnetic induction. In fact had faraday continued his works. I believe he would have discovered this mechanism himself. The jumping ring was some of his works. Which i believe implicates the event horizon and all of it's by-products.
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.terrylhewettsr.rackhost.net%2Fimages%2F%21ringofmagnetswithspacerssm.jpg&hash=b5268a433da98828a44d3a313ebf909b6c291843)
Above image is of the magnets superglued to sliced o-ring sections to space the magnets appropreatly arranged in a ring. Note the fields of the actual magnets spaced as such create the extra flux fields apparent in the top image. Also note that the fields are closer at the inner radius of the ring of fields and farther from eachother at the outer radius of the ring of fields
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.terrylhewettsr.rackhost.net%2Fimages%2F%21coreinfinitysm.jpg&hash=da4b5c4961d75d622534036bc4ec306f4c8765da)
Above image was me toying with infinity. I simply twisted the ring of magnets and it represented infinity.
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.terrylhewettsr.rackhost.net%2Fimages%2F%21pt6coreepoxysideupsm.jpg&hash=d586614b5041df5b032dd81c09b29652f93b9cde)
The image above is the ring of magnets (toroid armature) nearly half encased in epoxy. epoxy side up. I still have to finish putting epoxy on this componant and form it closer to a toroidal form. A lathe would be a great help here but that's not in the budget. looks like a wood jig, a drill, and a dremel will be the method of getting an approximation of a toroid form with this prototype. perfection or acceptable tolerances are not critical for this prototype it is just to show that the mechanism will operate as designed for peer review.
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.terrylhewettsr.rackhost.net%2Fimages%2F%21pt6r002sm.jpg&hash=7a37dc1025a09f1dd54d658b8b7288b3286a7527)
The above image is the Toroid armature with ring of magnets nearly half encased magnets side up. I had hoped that the epoxy would have been bubble free so it would be transparent. however it makes no difference.
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.terrylhewettsr.rackhost.net%2Fimages%2F%21pt6spooldblslicesm.jpg&hash=76653a70c0b7cc41f68bbcac9efb648685c75efa)
The above image is of a drawing i made of a part of the spool componant. it is double sliced and represented linear as all i have is a ruler and my curves freehand suck. The gear is just that it is a way of rotating the spool to wind the coils needed by design. it is around the toroid armature but not connected as the toroid armature is supported by the drive coil and will be caged in the center of the spool/toroid chamber.
(https://overunityarchives.com/proxy.php?request=http%3A%2F%2Fwww.terrylhewettsr.rackhost.net%2Fimages%2F%21pt6spoolcoilplacementsm.jpg&hash=aa815e99c86a0c12f3fe2c27c77da9ae20f684a3)
The above drawing is of the spool in this prototype it represents 1/4 of the spool the ends represent the gears on the spool/chamber. It is also represented linear but in application will be a toroidal form around the toroid armature. the spool/chamber will be vacuume sealed in production models but for the prototype it is still an option i am exploring. However the coil placement is simular to what it will actually be.
I'm in the process of making this prototype with very little capitol and i have to make small changes to the design due to the parts are just not manufactured as needed. I concider that a blessing as it indicates that NOTHING like it has been done before.
I'm allways ready to explain any aspect of this mechanism. If you don't understand anything or would like more details feel free to contact me.
Terry L Hewett Sr 8)
ring_theory@yahoo.com
http://www.terrylhewettsr.rackhost.net/
It won't work. It's why becouse when you use gear ratio, speed of mechanism increses for example 5 times but at the same time torque decreses 5 times, so those 5 balls on left won't be able to lift this 1 ball on right side of wheel. I hope you know what I mean. I was thinking about how to improve this wheel and if the wheels on the left side will have greater diameter than this on the right side, torqe of the left wheels will be greater than torque of right wheels, becouse gravity will taking place on longer arm, so machine should work. I hope I writen this quite clearly.
Michal Golabek