Overunity.com Archives

Discussion board help and admin topics => Half Baked Ideas => Topic started by: sparks on January 07, 2010, 08:31:10 AM

Title: Ultra Low Frequency Resonant Radio Receiver
Post by: sparks on January 07, 2010, 08:31:10 AM
    If we build a tuned circuit and tune it into the Alfven wave frequencies coming out of the Earth then we should be good to go.  The geomagnetically induced currents are a major concern for pipes burried in the ground.  The dc currents fluctuate in intensity which means to me any conductor lieing within the magnetic field densisty change should be able to generate voltage.  This voltage then phased into an oscillator and brought up to usable power levels of high amplitude low frequency energy from a highfrequency low amplitude power scource.  Tune in to the solar wind scalar wave activity as it causes emp blasts in the upper atomosphere of lets says tetratons of dynamite. 
Title: Re: Ultra Low Frequency Resonant Radio Receiver
Post by: nightlife on January 23, 2010, 07:31:22 AM
Quote from: sparks on January 07, 2010, 08:31:10 AM
    If we build a tuned circuit and tune it into the Alfven wave frequencies coming out of the Earth then we should be good to go.  The geomagnetically induced currents are a major concern for pipes burried in the ground.  The dc currents fluctuate in intensity which means to me any conductor lieing within the magnetic field densisty change should be able to generate voltage.  This voltage then phased into an oscillator and brought up to usable power levels of high amplitude low frequency energy from a highfrequency low amplitude power scource.  Tune in to the solar wind scalar wave activity as it causes emp blasts in the upper atomosphere of lets says tetratons of dynamite.

So if we wound a two wire coil we would have 4 leads. Two in and two  out. And if we attached one of the two leads in, to a receiver calling  a low frequency and  the other to a receiver calling a high frequency. Then connect the two outs together and then wrap the coil with a wire that would attach to a capasitor and or a bank of capacitors, we should acquire voltage in the capacitors that would supply a current when released.
We would be feeding a low into a high and vise versa creating a short that would be vibrant and the vibrance would collected and stored in the caps.

Does that make any sense?
Title: Re: Ultra Low Frequency Resonant Radio Receiver
Post by: sparks on January 23, 2010, 08:18:14 AM
    For sure nightlife.  All you need to capture electromagnetic wave energy is what the old radio guys called a discriminator.  Tesla invented it.  It is just a backwards oscillator.  It seperates the electromagnetic wave you want to use from all the rest of the electromagnetic waves hitting your antennae mass.  There are also ways to adjust the receiver oscillator so it sweeps the bands and captures a broadband of electromagnetic wave energy.  Amplitude modulated radio waves for communications dump the carrier energy so they can get to the information.  A variable frequency drive for a motor does the same thing.  The oscillations which are the energy carriers are filtered out leaving the lowamplitude wave that rides the carrier in tact.  Now we need to bring in an additional amount of energy to amplify the signal. We just got rid of an energy scource dumping it into various conversion things like resistors and now we have to go back and use more energy to drive a load like a speaker or a picture tube.  Does this seem kinda counterproductive or am I missing something here.