this is one of my versions of the vta or what ever..
you can pulse the transformers or the aircoils..
if you decide to build it .. you will be adjusting the turns on the aircoils to make it work better..
a real pain in the @$$ to get right..
you can use 1:1 transformers and then build 5:1 or better aircoils..
it takes alot of work with the aircoils
i will not tell you anything about the output.. you will have to discover that your self..
theres another way to tap the output but it means a totally different design..
so here is something to look at..
Well done!
Jesus
@Kooler
Much simpler then the other one you posted! I think anyone that wants to can replicate this one!
Can it light bulbs up?
P.S. What guage wire are you using?
OK I just ordered 5 115v to 12v transformers for $10USC so when I ger these I will be ready to start a replication.
Kooler I remember you using a transistor on one of your VTA designs would you recomend using a JT for input voltage, a cfl inverter or maybe a 555ic??? I do not have access to stun-guns as they are illegal in MA.
If anyone is interested here is the link:
http://www.amazing1.com/transformers.htm
Any one know how too tune teslas
earth quake machine I rocked mariana
islands 30 times with 369
it self oscilates to anything but i dont know shit about this
and dont really want to hook it up
with out understanding it more
the good news is beings it osilates at frequency
of earth no one was hurt biggest earth quake ever with no damage
but it maxes the volt metter when i remove it from
metal so there but be a perfect gap between the two
Quote from: cletushowell on August 16, 2010, 05:28:28 PM
Any one know how too tune teslas
earth quake machine I rocked mariana
islands 30 times with 369
it self oscilates to anything but i dont know shit about this
and dont really want to hook it up
with out understanding it more
the good news is beings it osilates at frequency
of earth no one was hurt biggest earth quake ever with no damage
but it maxes the volt metter when i remove it from
metal so there but be a perfect gap between the two
Smells like bull shit around here! Thanks for letting us know not to take you seriously....lol
Fuck you jackass
http://www.youtube.com/watch?v=rbkRSny8r3M&feature=youtube_gdata_player
search it yourself
aug 14 i already been arested once for my
earth battery and you
search solar flares and you see i live in ca put me dead in middle dont it
6.3 6.6 6.9
search earth quakes you will see its reality
can crash a satalight between two phone
can call a nation and circle frequency
on top of that I can hold it its reverse of haarp
You want math too
200000-54,000=144,000
144,000/9/6/3 =88888
56,000/9/6/3=1234567910 no 8
now the 8 is all numbers are recircles the power
back into the coil because the power cannot go into square wave
1-7 or 369
so 88=16=7
888=24=6
8888=32=5
88888=40
888888=48=12 =3
888888856=11=2
88888888 64=10
888888888=72=9
8888888888=80=8
so tesla put us on a grid we charged our nation with
1000 times the energy over last 100
years but he fucked everyone else
there not on a 120. 12 volt or a 369
system so we have free energy figure it out
im stuck on tuning and broke
http://www.youtube.com/watch?v=ejduisfMQUc&feature=youtube_gdata
12.3277,141.4732(M6.3 - Mariana Islands region - 2010 August 14 07:30:16 UTC)
12.2112,141.4082(M6.6 - Mariana Islands region - 2010 August 14 23:01:05 UTC)
12.5030,141.4738(M6.9 - Mariana Islands region - 2010 August 13 21:19:33 UTC)
here is three there data is off by one
369 not 10
and they all hit grid lines
on 12 36912
Quote from: stprue on August 16, 2010, 12:35:42 PM
OK I just ordered 5 115v to 12v transformers for $10USC so when I ger these I will be ready to start a replication.
Kooler I remember you using a transistor on one of your VTA designs would you recomend using a JT for input voltage, a cfl inverter or maybe a 555ic??? I do not have access to stun-guns as they are illegal in MA.
If anyone is interested here is the link:
http://www.amazing1.com/transformers.htm
stprue
this is the circuit i was using.. its not a real stungun
http://www.youtube.com/user/koolerization#p/u/9/ruJXtBby-pw (http://www.youtube.com/user/koolerization#p/u/9/ruJXtBby-pw)
i have 4-5 videos of this circuit shooting sparks and stuff
robbie
ps.. i forget to mention that the transformers in the middle can be hand wound toroids.. example= ferrite toroid 15 turns on one side and 40 turns on the other
If you can get over that fact theres
a 1 in billion chancd i created a earthquake with
a peice sheetmetal and earth battery
then theres a possibility that you can
understand im also the worlds smartest
man by the way shut down nasa and harp
and made the God like production list
but frequency is not my thing in fact all i have is a amp probe
and a shity one at that dont understand
any of these complex circuits of electrical
components but i do know the power goes back through 8
and I do have string theory and Gernobles on its way
You see marianna islands is deep part of the sea
so i charge the Grandcanyon positivly
so now its a magnet for the asteriod
and when it lands the Ill have the world biggest
power supply but still need help tuning
the coil To 120 volts is there a easy way
like a bolt that threads or do i need sonething complex
figure ill start it close and hope no more quakes
as I open it ill finish this beer
then try it again i think i can hook up a guitar and turn earth to a Giant speaker or possible a mike and hear the voice of the cheif prince of meshech
send a message to russia iran and north korea but i dont think they got the point may need to be a bit loader
but I dont see no psysics that says i cant magnify my voice thru earth do you
in Fact God said I can tell the mountain to move
now if its going thru my body is it telepathic
can wait for war to start soi cant test without no fear
of getting arested again
Quote from: kooler on August 16, 2010, 07:23:19 PM
stprue
this is the circuit i was using.. its not a real stungun
http://www.youtube.com/user/koolerization#p/u/9/ruJXtBby-pw (http://www.youtube.com/user/koolerization#p/u/9/ruJXtBby-pw)
i have 4-5 videos of this circuit shooting sparks and stuff
robbie
ps.. i forget to mention that the transformers in the middle can be hand wound toroids.. example= ferrite toroid 15 turns on one side and 40 turns on the other
Nice video kooler!
Ok so you are using this HVJTC to power you VTA! When you say you can the middle transformers can be toroids are you saying the 110v to 12v can be toroids? This would make it even easier to build. I will wait for my transformers to arrive anyway because I want to be some mag-amp and out of phase testing with them. Do you think you will make a video of your VTA soon?
Quote from: cletushowell on August 16, 2010, 06:19:53 PM
Fuck you jackass
http://www.youtube.com/watch?v=rbkRSny8r3M&feature=youtube_gdata_player
search it yourself
aug 14 i already been arested once for my
earth battery and you
search solar flares and you see i live in ca put me dead in middle dont it
6.3 6.6 6.9
search earth quakes you will see its reality
can crash a satalight between two phone
can call a nation and circle frequency
on top of that I can hold it its reverse of haarp
Thank you for reiterating...lol
Keep laughing when you find a way to cross
1000 times magnification of power and max the amp probe
and merge ac and dc to photon and warp light bulbs
using optic magnetic feilds from light then well talk till then your so far behind
I might nit know how to use the power but I cot more then this whole world combined and when I do put the death ray together which i will
then you see your laugh not so funny
@Kooler
Ok here is my initial rig! I'm using what I have so it is not exact but me know if you see anything really f*cked up.
Air Coils: 30 turns (green 26 gauge/black 22 gauge)
Transformers: 115v to 12.6v @ .1A (too weak I think but SM must have used weak transformers on his small TPU)
cfl transformer
FYI just added the 15 driver turns on each coil !
Not sure why I can't PM pictures!!! Here is the set up not can you tell me what is wrong!
??? ??? ??? ??? ??? ??? ??? ??? ???
Please be nice im having a bad day
i dont understan the electronics i do understand his
drawing combine the transforme and spiral winds
in a ceramic you dont need to build this its already done
a car coil get a good one the ceramic minimises the frequency loss
hope this helps
stprue
without knowing how the transformers are wired i can't say if thats right but i am going to post a pic below..
and also the driver you got may be to high of a freq.. i think it runs at 30khz.. you will need lower freq..
also you will have to do something that would be hard without a scope but you may be able to check the output of the aircoil with a meter.. you need as much voltage out of the aircoil as you can get.. with a scope you can see the very tall spikes .. that a meter won't show..
it would be nice if you have a driver that was adjustable with the freq..
i would love to have a function generator.. but maybe later if things get better..
below is how they have to be wired.. on the transformers are hard to get cause you have to know were the beginning and end on the windings are wound..
let me know if you need anything
robbie
Quote from: kooler on August 15, 2010, 03:55:10 PM
this is one of my versions of the vta or what ever..
you can pulse the transformers or the aircoils..
if you decide to build it ..
...
Hi Kooler,
What are your input/ouput measurements ?
Quote from: kooler on August 24, 2010, 09:05:42 PM
stprue
without knowing how the transformers are wired i can't say if thats right but i am going to post a pic below..
and also the driver you got may be to high of a freq.. i think it runs at 30khz.. you will need lower freq..
also you will have to do something that would be hard without a scope but you may be able to check the output of the aircoil with a meter.. you need as much voltage out of the aircoil as you can get.. with a scope you can see the very tall spikes .. that a meter won't show..
it would be nice if you have a driver that was adjustable with the freq..
i would love to have a function generator.. but maybe later if things get better..
below is how they have to be wired.. on the transformers are hard to get cause you have to know were the beginning and end on the windings are wound..
let me know if you need anything
robbie
Thanks Robbie, I will try this tonight, I will use one air coil and my function generator and scope it at the same time! I think you are right about the frequency....too high! If I can't get the transformers wired right I will try winding some torroids up! If this deosnt have to be high voltage then 10-12v from my function gene should be fine but I was under the assumption that it the input had to be HV! I also noticed no vibration at all. More trouble shooting!
Im trying to help take what i say
and think dont take it for evidence
reverse the air battery to the zinc inside
like moray and hutchesion sonething with aluminum
and stainless he puts stainless run car
theres something up with the incandescent bulb were all missing
theres a frequency spiral put in the fillament
the energy is going thru the wire not out
some how moray backed the energy up
to go thru the wire we dont need a shit load of power we need
a injector of some sort that backs energy up
but pulses the same 60 hz forcing the
energy out the bulb this will be hard to understand
the wire fills the light with frequency
that frequency is not lost it has to be building
i think moray used his 50 bulbs
to back the energy up when you connect
one it stops the razor but energy is not stoped
its lowered working in reverse current
means thinking backwards using 50 bulbs
some how chokes the energy into the cells
now what should the cells be
well i beleive a light bulb inside granite
emits the frequecy of the bulb then the
frequency is stored in granite and then the wood
structure of the cell must have the perfect water
like air battery to stop frequency loss
he had a v on the end the iron
and then a plate of steel this must the force the
energy thru the 50 bulbs either in reverse or pulls it to the
iron out the Glass its crazy to jump a spark and not be able to power
unlimited lights tesla and moray busted this part
we havent I hope im helping if you can explain
what the vibration does I got my coils vibrating
but dont know why its important
tesla said frequency vibration and sonething else
how do you harness vibration?
Please email if you know this is pretty complicated
I know im pushing the limits of everything at once.
Till we bust this power the energy can be
manipulated to increase the amps thru one coil
i increased from .001 to 1.35
by changing wire direction thats huge but I dont know
how to harness the 1.35 amps going thru yet
the video will be up shortly hope this helps sorry its so long
No luck yet! I have tried multiple freq's on my gene, biggo JT is a no go (not sure why??? over saturation probably), exciter circuit results below!
http://www.youtube.com/watch?v=uHhxj_WD6vc
blah...blah...
ok after playing around with this circuit today I have had some better results. over 600vAmp/200vRMS/vAve3.2 or so enough to drive a floro at least. After disconnecting power I noticed a rouge spike...small but there! Is this spike due to my scope being connected or is it something else???
Ok I am using much more powerful transformers rated to 2A. This is nothing too special but using my gene at 9.6v I can produce some voltage and more importantly see the potential. My next task will be to wind a powerful JT and use that instead of my gene. Sorry for all the wires but I am using Koolers simple schematic above!
sorry stprue,
i was able to get back down to the foxhole the next day after i busted my nose..lol..
and i made a diagram of what i built and it wasn't nothing to do with the sweet design..
i need to go to AA i reckon.. i was toasted when i posted the other diagram..
so i am sorry for leading you in the wrong way.. below is what i was working on .. i got rid of the discharging of the cap and noticed it still had very sharp cutoffs and powered the circuit just as good with lower draw from the primany..
i switched the backwards 12 volt transformer for a flyback to get the best spark.. its wierd because the circuit really works like a radio.. first the transmitter and the receiver which is the (aircore) then goes to a 120 to 12 volt transformer back to primany..
i haven't had time to work on it because of stress due to owning my own biz and daily life..
i do think it could be scale up alot..
Hey Kooler,
Looks impressive.
Can we please have some detail on the AIR-CORE.
I would love to have a go at replicating.
BTW, I posted in Kapanadze thread, hope you are OK with that.
Kindest Regards, Penno
Quote from: penno64 on October 30, 2010, 03:00:06 AM
Can we please have some detail on the AIR-CORE.
BTW, I posted in Kapanadze thread, hope you are OK with that.
thats fine..
my thoughts on the kapanadze device is a little more different
like on the air coils .. will not be bifiliar
but over top of each other..
plus i was going to build just like a old radio but i was going to pull the frequency down on the output..
if you want the spark to be quiet then you can put a earth ground on one side of it..
you also get alot better power output but i don't like earth grounds.. if you ever put a scope on a earth battery you will see why..
it's called stealing.. hahaha
Hey Kooler thanks for the schematic, this will help a lot. I am in the middle of trying to sell my place right now so my lab is in storage until we more. I have definitely been jonesing to build but it is impossible right now. Anyway I hope you are feeling better and I hope you stop hurting yourself.
~Stew
;D
(quote)". i got rid of the discharging of the cap and noticed it still had very sharp cutoffs and powered the circuit just as good with lower draw from the primany..
i switched the backwards 12 volt transformer for a flyback to get the best spark.. its wierd because the circuit really works like a radio.. first the transmitter and the receiver which is the (aircore) then goes to a 120 to 12 volt transformer back to primany..
i haven't had time to work on it because of stress due to owning my own biz and daily life..
i do think it could be scale up alot.."(quoted from Kooler)
Hi Kooler,
I am going to replicate your great idea, but I have a few questions to ask....
1) Is it all right to use the HV coil from a stun gun for the flyback you are using in the circuit? Or is it a television flyback?
2) Please be more specific regarding the specs of the aircore coil, as the diameter, gauge and number of turns of it. thanks.
3) Can the 110:12V trafo be replaced by a homewound toroidal coil, say 12T to 150T AWG24 wound in a 2.5CM OD green toroid?
Thanks for your attention, Kooler and keep up your research!
aaron5120
aaron
the more voltage in the spark the better the transfer.. you could use any transformer.. getting 5kv or more helps..
the aircore does three things.. first, it collects leakage from the hv coil.. second , it keeps the load from pulling more from the input so the input draw stays the same.. third, induction.. the spikes are tall they kind of over run the iron transformer..
the feed back to input is just to give xtra power in..
the important part is the power made between the aircore and out transformer..
yes i perfer to wind my own transformers.. if you use ferrite .. you don't need the aircore.. but you will need two ferrite transformers..
but the input source needs to be cap discharges or the spark discharge like above..
my aircore setups seem to be best when using about 1000 turns on secondary and 40 turns primany..
a good one i made used 22 awg mag wire..
robbie