Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of this Forum, I am asking that you help him
by making a donation on the Paypal Button above
Thanks to ALL for your help!!


Half TPU

Started by MACEDONIA CD, June 16, 2007, 01:02:07 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4
User actions

chrisC

#15
June 25, 2007, 05:10:02 PM
Hey Bruce:

Please don't take this as a disrespect. I'm so confused by your many statements and theory.

This last one is like you''re translating Macedonian to Dutch! (sorry if we have Dutch folks on this forum!)

Cheers

chrisC

Bruce_TPU

#16
June 25, 2007, 05:34:49 PM
Hi Chris,

No, It is a great question!  So let me clarify, because it will help others as well.

My theory 1.3 LOL
In my mind I have broken down the components of SM's TPU as follows:

1.  Operations/function
2.  Solid State controller
3.  Real function of the control wires

Operations/function
For the function, I see frequency signals at fast send off as we have been doing, within the collectors.

As part of that process, I see identical signals (35.705 KHz + 250 KHz or close) with different sources input in opposition to one another.  This sets up two revolving fields as a gyroscope within the Collectors.  This function will create power.  I believe far too much, if we seeking OU can wrap our mind around that.  That brings us to the second part:

Solid State controller
This will do the following, as I see it:
1.  Send off the signals fast send off (I believe Roberto has given us a start on this)
2.  Will provide seperate sources for each cluster of 2 or 3 frequencies being sent in opposition.  Based on what BEP has said, It would be only 2 frequencies, because the intermodulation would be the third and would happen within the collectors automatically.
3.  Future controller will have to "modulate" (I think that is the right word.  BEP would know) the frequencies, because they would continue to create new frequencies as BEP on my thread shows and without control, as SM said, it will destroy itself.
4.  Will invert our battery to AC and feed this into the control coils at 7.23 hz.  That brings us to the third part:

Control Wires
Control wires that "control" the flow of electrons by sqeezing them like water to go in just one direction, thus giving us an output of DC and not AC.  This is done by an oscillating AC electromagnet at 7.23 Hz.  Providing a changing field and a strong magnetic wave for minimal power.

As you can see my theory has matured!  LOL   ;)
I hope this helped!

Thank you for your time,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

giantkiller

#17
June 26, 2007, 05:59:09 PM
Very good.
Now picture in your minds the wave directions of the mag fields expansions. Especially when the BEMF collapses back onto the copper...
http://www.gmi.edu/~drussell/Demos/waves/wavemotion.html

We don't want to leave out any artifact of radiant energy.

--giantkiller.

MACEDONIA CD

#18
June 28, 2007, 03:59:07 PM
HI  MY FRIENDS  IS NOT A TRANSFORMATOR   IS ELEKTROMAGNET   OK  MOVING IS HIGH SPEED   IF YOU WHANT A HELP  HERE I M   TO HELP   OK  THANK TO  EVERYWONE       BY FROM    Macedonia   by

Bruce_TPU

#19
June 29, 2007, 11:21:43 AM
Hello All,

This was PM'd to me from our Macedonian friend.  I agree, either we "test, experiment" with an ac 7.3 Hz electromagnet and/OR tune our collectors to that resonance. 

OK  YOU ARE DONT  ANDERSTEND MY  IS LIKE THIS   



    OK TKIS  IS NOT A TRANFORMATOR  THIS IS ELEKTROMAGNET  HO  IS APSOLUTLI  IS NOT THE SAME  LIKE ORDONERY TRANSFORMER  OK   



    YOU MAKE ONLY  ELEKTROMAGNETIC  NOT WHIT CORE    THEN YOU MAKE   COLECTORS COIL   THEN YOU  MAKE  A OSCILATOR  HO IS  PULSE  THE ELEKTROMANETIC  WHIT HIGH  SPEED   IF YOU R  OSCILATOR  IS VERY HIGH SPEED   THEN YOU GET A  BIG POWER  IN THE OUT  OF THIS COLECTORS OK


   BY


The answer is ONE of the three:
1.  AC electromagnet 7.23 Hz  (reference marco's dancing magnets in youtube for more understanding.

2.  Collectors are tuned to 7.3 Hz ("tuned just off of the frequency of power" located at 7.8 Hz, Shumanns Resonance)

3.  Both 1 & 2 must be done.

What I do know:  The answer will be #1, #2 or #3

Happy, Happy days!  :)
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 2 3 4
User actions