Ghazanfar Ali Generator - Utlilizing trapped energy

[dole]

Hi Gyula
Thank you very much for your time and all writings. I do not have anything to say,
everything is just perfectly correct and only the worst thing is left.. to do it properly.
Actually this may not apply directly to Ali-OU, but more like ultimate principle of electromagnetic resonance.
As I see it, all around us are just pure capacitance and this must be only way extracting it.
But I (we) first need to start crawl before I can even try to go.
Yes, I have 18uF AC and the others, many ferrite cores and type of FET’s (including IRFP 260/264).
I was playing with “my incorrect” Tesla stuff for a while but that’s enough.
Messing with TV signals and destroying WLANs. I felt it not correct, almost like throwing 100 stones (SG) and one or two will hit the wine glass,
I am thinking now at only tiny one, with the exact enough energy at right place.
I will come back to you with more questions but my problem is time as I cannot buy the money or the time.

1-    2044Hz- Initial test of HCF40106B as MOSFET driver measured at coil (not good 50%, fixed with better C&R)
2-    4700 uF oscillation, much slower than LC tank, yes there is spikes there I have somewhere better picture but dies due to not sustain LC tank
3-    LC tank â€" not nice so no picture jet
4-    Something to try later

Xdole

[AbbaRue]

Here is a circuit I made with Circuit Simulator v1.5n

http://www.falstad.com/circuit/

It puts out 1600W from only 28 watts input.
Test this in these other simulators and see if you get these results as well.

[broli]

So Ali we're 3 weeks later, I hope you will upload those videos now.

[poynt99]

Show your wave forms and power calculations/wave forms please.

[wings]

Here is a circuit I made with Circuit Simulator v1.5n

http://www.falstad.com/circuit/

It puts out 1600W from only 28 watts input.
Test this in these other simulators and see if you get these results as well.

regarding 8 lightbulbs load resistance
http://farm3.static.flickr.com/2071/1582918380_9bd8356cf0.jpg



In a light bulb, the resistance of the filament wire will increase dramatically as it warms from room temperature to operating temperature.[/size]
http://cnx.org/content/m32840/latest/