Bessler's En Principia

[johnny874]

  @All,
I couldn't resist this so here goes.
The attached pic is of supergokue1's Heron's Fountain. I think it's nice when people are willing
to share information.
What I have done is captured an image of his fountain to measure the pressure heads. What I found
is the pressure head performing work has a little over 3 times the mass or volume as the pressure head
being pumped. If these same values hold true for any water pump (not sure why they wouldn't be close),
then with a 5.5 to 1 ratio, it could be possible to have the amount of water (weight) to be more than the weight
operating the lever/pump. A simple way to look at flow and force plus there are many people on youtube who
enjoyed posting their work/research just as Vejlko Milkovic has done with his Oscillating Pendulum. 

                                                                                                                         Jim 
a link to supergokue1's video,
http://www.youtube.com/watch?v=92tk8oB8QAY

edited to correct sgokues name

[TinselKoala]

You think it's nice when people are willing to share information? Is that why you sent me this lying PM, but blocked me from replying?

Well, I'll share the information here, then. You sent me this PM to provoke me, and you make, once again, the accusation that I and others are somehow ripping something off. Yet you still seem to have trouble with your dates and who said what. 

Here's my response, and your trolling PM to me, that you send out but refuse to receive a reply to.

:::::::::::::::::::::::

This is my answer to the trolling spam PM you just sent me, Jimpbo. I have to put it here... because you blocked me from replying, like the soft little clay caricature of a person that you are.


You are lying again and you really should stop.

Bill and I both gave full credit for our Heron's Fountain builds to the Make magazine article which has been referenced many times. My idea concerning the Heron's Fountain was to put a multichamber Zed into the bottom reservoir, which I did and showed in a video on August 24, along with the positive effects and their explanation. You once again accuse me and Bill of "ripping off other people" which is an unsupported lie. The evidence shows that you are a troll and a stalker and will not recant your lies and accusations. Nor will you actually build anything of your own to prove your contentions. Heron's Fountain has been around for a long time, and nobody around here is claiming to have invented it, Johnny, but you are making many false claims about others in your posts.

it is listed 3rd on the search for Heron's fountain and looks a lot like what you guys built, even reverses flow like you guys did.
You should let him know he's ripping you and bill and magluvin off.
Of course, his video is about 2 years older than what you did, the evidence shows you guys can't come up with an idea on your own and don't mind ripping off other people.

http://www.youtube.com/watch?v=92tk8oB8QAY

[johnny874]

   @All,
Please ignore Alan. As you can see,. neither him notr his friend Bill discuss engineering.
This is soemthing my father told me had to tolerate from Americans. Unfortunately for them,
I am not my father and since this is not the 1950's and 60's, I have no need to tolerate their bigoted behavior.
As you can see, they are upset that I can discuss the engineering behind heron's Fountain and this also means
how it might work perpetually. It's a simple propostion really. If the column of water performing work has a larger
diameter, it will hold more water while having less height. And with what Heron demonstrated, the 2 pressure heads
do need to be kept seperate or otherwise the 2 columns would have the same height.
In pirate88719's thread, I offered a basic design to them if they wanted to try it and was ignored for it. I guess
I am not American enough for them. Thank God is all I can say.
I have met many Americans who do not judge me because my father immigrated to America or that I learned to speak
in Norway. As pirate88719 told me, I need to work on my English. My friends are fine with my English 

edited to add; my father was asked on more than one occasion why doesn't he move back to Norway because he wasn't welcome in America.
What to say, ignorance is difficult to understand.

edited to add; since this is Bessler's wheel, anyone can build it. And if soemone is up to a challenge like this, I may be able to help with what I have learned with the work i have done.

[johnny874]

  @All,
I hadn't taken the time to read Alan's post.
I guess next will be another one of his friends attacking me. The idea I posted for a perpetual Heron's Fountain they claimed was their idea.
It's one thing for them to attack me, but to bring the person whose video I linked to is a new low. Will need to block him and his friends.

edited to add; if I am building this to impress anyone, it would be a gal I know at work. This is something that she would like to see. but with how much work I've missed because of medical problems, any more , who knows.

[Pirate88179]

   .
This is soemthing my father told me had to tolerate from Americans.

I am not American enough for them. Thank God is all I can say.

As pirate88719 told me, I need to work on my English. My friends are fine with my English 

edited to add; my father was asked on more than one occasion why doesn't he move back to Norway because he wasn't welcome in America.
What to say, ignorance is difficult to understand.

.

Hey Captain Oblivious, this one is very easy....if you do not like America nor Americans, then get the fuck out!  America does not need lying cry babies like you anyway.  Take your Socialist ass to whatever country you think is better...do it now....PLEASE!  If you need a ride to the airport, i will gladly arrange that.

How dare you insult this great country of ours.  You are scum of the lowest kind.  If you can't speak/type/read English then go back to wherever you came from.  I suggest a country that speaks gibberish fluently as you seem to be able to do that well.

Bill