Kapanadze Cousin - DALLY FREE ENERGY

[MenofFather]

The question I would have is, is that aluminum sheeting connected to anything such as another coil, or is it just placed in there with no connection? Without having more specific details I think the best you could do there is experiment with a few different ways to connect the aluminum sheeting in, and compare to leaving it unconnected. I will see if I can find some time to do some experiments with this sort of setup over the next month or so. I am also interested in trying this out.

Maybe it conected to drosel (like in hendershot), or maybe to nothing.

[NickZ]

  Ok, MenofFather:
  Thanks for the warning. I am not trying to replicate that device, in any case.

  I hope that the Akula diagram was made by Akula and that everything is ok with that particular device.

  I'm very tired of the hide and seek game.
  I tend to trust the earlier projects, like the TK 2004 video and device, as well as the SR 193 device.

  What we need is for one of us to make a true working replication, with an exact diagram, and share that.
Not as easy, as it sounds, as the money aspect always gets in the way.


  The choke will receive energy from the big air coil with or without the aluminum sheet liner. But, it may work better with it.  This, I'm still working on. But, I need the proper cap(s), 3 in total, or more if you include the pulse circuit. The yoke is using a 5uF one of 600 volts, that is my main objective to obtain next. But, that may vary with the individual circuit, or, it may not be that important to use only right at 5uF.

  Last night I took the time to watch the UFO disclosure, but was pretty disappointed by what was said, as it's just the same old thing.  So, what's changed? As if the government doesn't already know. The only thing they will now disclose is what they don't care about. But, NOT the free energy systems, which they have and use, in their underground bases, transport system, lighting systems, etz...
  All that is really needed here, now, won't get disclosed. Like also direct food production, without agro involved.
  Anyways I thought that it was all very boring, but hope that something does come from it all. At least from us.

[Void]

MenofFather is guessing that the secondary coil is about 40 to 50 turns, of 6mm2 which I don't know what gauge that is, but it thick enough, and not mag wire.
  I've made my big secondary coil 43 turns, and 4 inch diameter. The resonator coil is 12 turns, and feed-back coil is also12 turns, all three coils are made from the same (green stranded insulated house wire), and both the two smaller coils are wound on top of the big 43 turn secondary coil. My choke former is about 2 inch wide by 6 inches long wound with the same green wire, and has 12 turns loosely wound with a start Ac fan start cap attached to it (for now). I'll try to upload a pic or two tonight to give you all a better idea of what I got going. It also has an aluminum liner on the inside of the big air core.
I can light a 60 watt bulb on 9v, and less than 1amp, to about 60% brightness, as is, now with no tuning done on it yet. Pulsed from my Joule Ringer 3.0 circuit, using a 5 inch ferrite rod core, and a  single TIP 3055 transistor, or similar one, with no other component on that pulse circuit. Just a single transistor, ferrite rod coil, which is then connected to the yoke.

That's working not too bad then as an inverter if you can light a 60W bulb to some degree. Do you mean a 60W incandescent bulb? Gadget Mall has a video showing a 60W incandescent bulb lighting with a modified Lasersaber JT v3 circuit. He says he is drawing close to 4 amps at about 13.5 volts though. How are you measuring your input power to your JT driver?
http://www.youtube.com/watch?v=qm8O1hMXpRs

I watched the first Akula video again and I think MenofFather is right. It does appear to be fairly heavy gauge wire used for the secondary winding, although I can't tell if the secondary continues on under the primary winding or if ends at the top of the primary winding. It kind of looks like it might possibly end where the top of the primary winding starts.
6mm^2 wire would be in between 10 to 9 gauge AWG wire in thickness. Here is a handy conversion chart between AWG and mm^2:
http://www.engineeringtoolbox.com/awg-wire-gauge-d_731.html

[Void]

http://www.realstrannik.ru/media/kunena/attachments/4743/img004.jpg
This image it seems drawed by Akula. His seems draw and send to some man to skype. This man share this image.
This video http://www.youtube.com/watch?v=QZzVb7CqnaM is FAKE! One man try show how easyle made fake. Hi letter show other video, in that he say and show that in divice go very tin wares, that we can not see. Other men in this chanel say that it have schematic, but how it can have shematic if it fake? So not look to this video, it fake 100 precents!

Thanks for the information MenofFather. Ok on that video being a fake. Not only that, but the same guy who posted that video on his youtube channel at that link, posted an email address where he is asking for money for schematics for this device! This same person also has a Dynatron video posted and he included a comment asking for 'donations' for Dynatron's research project or something like that as well, I believe, but I think the money may go into this other guy's pay account from what I can tell. If someone is in contact with Dynatron, they may want to inform him about this apparent scammer. Here is the link to the Dynatron video this guy has posted with his comment on where to send money to help with Dynatron's project. I would guess there is a good chance the money is not going to Dynatron considering that the other video he posted is supposed to be a fake.:
http://www.youtube.com/watch?v=Doo4jhIr1vs

[Void]

Maybe it conected to drosel (like in hendershot), or maybe to nothing.

Yes, it is hard to say exactly how it may be connected in. We also don't know any details about the drossel. Very hard to try to replicate if we don't know what exactly we are aiming for. Rather than trying to replicate this device, I will likely just experiment some more with the general approach that seems to be used in this device and see if I find anything interesting.