Kapanadze Cousin - DALLY FREE ENERGY

[Void]

  A small wattage car bulb should do. Or not?

Yes, I think so, from what I understand about the circuit setup.

[verpies]

f=50Hz 1% duty cycle gate-source voltage pulses scope probe
f=50Hz 1% duty cycle drain-source voltage pulses scope probe

Aren't these photo descriptions reversed?
The gate pulses should be positive for an N-ch MOSFET.

What device are you driving the MOSFET's gate with?
Please draw the oscilloscope probe positions on the schematic.

[Dog-One]

Here's apecore's picture so we can all see it. It took a couple of minutes using Paint.

Seems to me this would be an interesting device (coil/capacitor) to expose to a high voltage e-field as shown in the first Roma Grits video.  Notice in that video there is no "apparent" connection between the main secondary coil and the adjacent "pickup" coil connected to the "capacitor" (unknown device under the coffee cup) and output load.  Likely such a composite device could be directly connected to a load.

I'm still experimenting with low power, high frequency stuff at the moment, but as I get into the range of blowing electronic appliances up, I may have to take some time to wrap such a coil/capacitor device and see what it does.

BTW Verpies, that coil I wound and mentioned a while back, it loves to run at about 2.5MHz and is a little tricky at the moment keeping a MOSFET Kacher out of the Miller range--runs a tad hot.


M@

[Void]

Hi x_name41. So the main MOSFET that drives the bulb directly is being
driven at 50HZ and 1% duty cycle, but what frequency and duty cycle should I switch the
MOSFET switch for the choke coil at?

I am going to go out for a while and see if I can pick up a 12V low wattage car filament light bulb to
try this test. My 12V, 35W halogen bulb is probably not suitable for this test...

[Grumage]

   Ignorance can be bliss, but a link to his patent may even be better.  Or don't you have a link to it?

   Makes me wonder how Tesla was able to get a patent on his flying machine, without ever making one. 
Same with TK's patent?

   What is that picture from apecore above about?  I seam to have missed the description?

Dear Nick.

Just for you...............   

http://freeenergynews.com/Directory/Electromagnetic/Kapanadze/Kapanadze_Patent_WO_2008_103129_A1.pdf

Cheers Grum.