Kapanadze Cousin - DALLY FREE ENERGY

[Hoppy]

I will see to share soon hopefully and recordings somehow
,But the most recent schematics of Ruslan and akula tell everything, your answer is in there with the circuits, use them wisely and be carefull if you don't know what you are doing!
but For what I am sharing now is of great importance and has to be taken seriously if you want to achieve it.
Impulse is the key.

Cheerz~

Sounds like you have made exciting progress Geo and achieved a self-runner. I look forward to seeing your device working. 

[GeoFusion]

Hi there Guyz 

  Nickz:
It's also Great to see you back and are still on the forum and to hear from you haha.
Been busy, and many other matters came about to my understanding.

That is good, Keep following them, because they have it (=. Akula and Ruslan have already givin out what ppl need to know already how
to understand thier work and what they are using, But it's a matter of trying it out without Fear.
Yes at night is cool, always good moments to work with circuitry and with some music to the ears at times

Yes, those tips are most important to be understanding, But I'm very cautious now how I give this all out, Don't want anyone hurt.
this is why I want to see who understands it and manages to replicate too.

It's completely different how the circuit works compared to a HF Oscillations field ZVS Mazilli circuit.
For the ppl who have made Solid State Tesla Coils can understand what is happening with these Akula/Ruslan circuits.

Impulses have to be achieved and made, otherwise you can't manage to make selfrunners.
not by using HF Oscillations. You need an output where the voltage is constant and not dropping and using up the amps.
Look at an ordinary Inverter, 12V to 120V. with X watts.  ask your self why the voltage doesn't drop when you connect load and want to measure . think.
In there the answer lies and in many other things to realize what is missing.
 
I see, you never Gave up and still working on the form of the Mazilli/heater circuitry, great progress and I see you also Added even a ferrite piece of flyback trafo to it too.
Btw never take of the Ferrite from the Mazilli circuit, You can blow up your fets.
It has to have the moments to transmutate with it and for you to able to get the massive output you have. Ferrite is what is needed by Heater circuits ( HF HV Oscillations) like that for Resonance. By Impulses It's a different story.

About the Akula's Videos, Especially that one Nick, Those are pulsed HV HF arcs of the tesla coil/kacher/exciter. yes it burns gradually, Guesing I will be uploading a small video about that one, as a small tip.
When you work with impulses , that is what you get (=.


My way how I saw and understood it in a way

Impulses= Expand and contract , Refresh constantly disruptively within the core of coils, The beating heart of the machine which gives life, just like your beating heart.



Hoppy:
Yes, soon enough for sure (=
But I wish to see that everone understand Impulse Circuitry and it's dangers too. It's no game hehe
Don't want anyone hurt. But I will show soon enough.


Cheerz

[NickZ]

  quote from Hoppy:
  "Although Nick is currently unable to measure his setup in terms of [color=#0081BD !important][/color] consumption, it is highly unlikely that anywhere approaching 250 Watts is being consumed by the lamp load, whilst powered from his small and battered old SLA battery."
              end quote.
 
   Just give me some time, I'll will buy a new battery, as well as a new meter.
I may even get a scope, if that is the only way to get to where I'm going with this.
Hopefully the new meter won't get fried by the high voltages from the pulser units, Like has happened three times before, when testing HV circuits.

   Lets just say that Hoppy's comments above are correct. And that the Mazilli crt is outputting only about 50 watts, to the 5 or 7, or more bulbs. Which is what the old battery may be able to do. Accurate lumin readings would probably confirm that, one way or the other. Or would it, really...
   But, that is not my concern. My ONLY concern for now is to obtain a self running device. Even is it only lights a single tiny led bulb. I know that may not go well with most of you, which would rather like to see accurate readings, and numbers, and such. But, I don't really care.
  In any case, I'll do what I can to confirm what may be going on, when I'm able to.

   What I can see for the moment, is that OU may not be obtained by simply using an oscillator which has a primary, and secondary windings, and which also has a feed back circuit leading back to the input source. There is more to this than just that.
   This thing about Impulses, has me intrigued. As we have been talking about this, resonance, as well as impulses, without knowing what the heck is really going on. And we still don't know.  If it's not HV, and HF, along with an induction heater type crt, what does this secret misterious "impulse" consist of???  And HOW to obtain it.
Can anyone be more specific, not just hints, about springs, mouse traps, and such.

[Hoppy]

 
Hoppy:
Yes, soon enough for sure (=
But I wish to see that everone understand Impulse Circuitry and it's dangers too. It's no game hehe
Don't want anyone hurt. But I will show soon enough.

Cheerz

Are you actually self-running yet GEO with your impulse setup?

[Grumage]

     Just give me some time, I'll will buy a new battery, as well as a new meter.
I may even get a scope, if that is the only way to get to where I'm going with this.

Dear Nick.

My offer still stands...... 

Like GeoFusion, I have been looking at different themes !!   

Cheers Grum.