Kapanadze Cousin - DALLY FREE ENERGY

[NickZ]

   OK,  so I got the rewire done on the TL494. But I lost one output from the #10 pin (E2 pin), on the TL chip.
It was working for a minute (both outputs),  but now I get just one output that works. So I'm looking for the cause.
Any ideas?
   Other than that,  the mosfet driver signal on the working channel is showing dead time controls working as expected. You guys can decide if that signal is looking right, or not.
I'll make another short  video,  when I get both channels going again.

   Nelson:
   Anything new and exiting from your projects?  Are you selling a working self runner? As you are the only guy posting here that has managed to build one.
   Yes, it's hard to trust anyone or anything these days.  But, I trust you...
   Keep up the good work.
                                             NickZ

[nelsonrochaa]

   Nelson:
   Anything new and exiting from your projects?  Are you selling a working self runner? As you are the only guy posting here that has managed to build one.
   Yes, it's hard to trust anyone or anything these days.  But, I trust you...
   Keep up the good work.
                                             NickZ

Hi Nick hope everything goes well with you ,

I will explain you something :

It never my intention sell a self runner device even i achieve feedback some of my unit's , but not my real goal ,  i told you since the begin my goals are not that  , but i explain to you and others even shocking some few people,  that of some effects showed by some devices like Ruslan and Akula or others,  could be reproduced without use the Tesla coil or katcher or any of their "Secret diagrams" .

I told to ,   people should think by their own without copy others work because that work  are changing all time , and already go some year past since i say that,  and you could see how many success they have, but time is the best advisory to most people .
   
I did not waste my time and energy, reproducing something that i really don't know if are a myth or not , indeed i continue study and read good literature and applying them in something very palpable and real, make i go forward in my research and in work to improve my actual systems .

Yes i made some improvements and day by day  it will happen again , because i do this not only a real job but a work life model.

I don't have afraid to show my work to real persons face to face because my devices are real , i'm not a yotuber money earn click  that need get money by youtube click's  i make of this my real job , so i show my work in real life  people and to industries and that is much severe and painfull then the comments  that some people send in my channel .

Some of this guys should thank to me even don't like the way i share the videos, without explanation or diagrams , by i share what i consider enough to someone think how it is possible i able do what i show , and make them put their brain to work and ask herself how technical it could be reproduced.
The remain question about this type of systems , is if some of that devices  work exactly like they show  and "sell"  the idea of free energy without put any power or if are only a more efficient way to produce available work (W) , and  that is the real question to people ask herself .

Members like Geofusion that make a excellent work in research this theme , show already that is possible with a lower power input obtain more "available" work make possible use more higher loads , and that is a real good begin , to everyone start,  but the "magic" is nothing to do with that particular electronic configuration of Ruslan or even other , and by know for sure Geofusion already know that for sure

Nick i see you efforts try make your best ( I see you design new board) but if you are in a wrong path is not a waste of time because you learn under that process, but will be a delusion to you at end after some much efforts made by you , not achieve your goal .
I will stress again to you and other people about possible effects of this type of devices to healthy , if propeller tune no problem but otherwise could create real health problems , and is much more easy that happen's then the opposite , trust in my words .

Good luck and Hope you enjoy
   
https://www.youtube.com/watch?v=fJ0roz9qz0g

Nelson Rocha

[Zephir]

It never my intention sell a self runner device even i achieve feedback some of my unit's , but not my real goal ,  i told you since the begin my goals are not that  , but i explain to you and others even shocking some few people,  that of some effects showed by some devices like Ruslan and Akula or others,  could be reproduced without use the Tesla coil or katcher or any of their "Secret diagrams"

But you refused to show us even the scheme of your simple Amazing oscillator. If You don't want to make money with selling them and if you really want to explain others its principle - what prohibits you to show us at least the scheme?

[AlienGrey]

   OK,  so I got the rewire done on the TL494. But I lost one output from the #10 pin (E2 pin), on the TL chip.
It was working for a minute (both outputs),  but now I get just one output that works. So I'm looking for the cause.
Any ideas?
   Other than that,  the mosfet driver signal on the working channel is showing dead time controls working as expected. You guys can decide if that signal is looking right, or not.
I'll make another short  video,  when I get both channels going again.

   Nelson:
   Anything new and exiting from your projects?  Are you selling a working self runner? As you are the only guy posting here that has managed to build one.
   Yes, it's hard to trust anyone or anything these days.  But, I trust you...
   Keep up the good work.
                                             NickZ

Nick get your scope out and run through your soldering and test each stage with your probe and dry joints then you will find the fault.

Re Energy energy is coming from the sun every day it's sending the stuff to us not all of it is deflected into space in solar winds, maybe old song 'Perry Como' catch a falling star and put it in your pocket is sorta what Nelson is doing he he !

[AlienGrey]

Well you should ask Ruslan or the one who designed it, but i understand it will generate the push pull signals at a frequency in the 17, 27 or 37 KHz range.
This together with the Kacher resonance frequency in a 1:50. 1:60 or 1:100 relationship should provide the "magic" via the Grenade coil to pull power from the ground.

Apparently, the stability of the TL494 needs to be great like within 100Khz, so a PLL system would be an advantage (and we have already seen a PLL setup (Oleg)), but it
seems not required as we have seen setups without any.

Itsu

years ago i was interested in overlaying text on video feed like Test or targeting a particular section of interest on the frame in view, ir first i used a VFO but the components and 70mhz CPU's were a fortune, one i got deeper into this technique I found a simpler way to do it with a 10mhz PIC chip and a 'HC' 'd'type and a gate for just a couple of quid the thing here is what are wanting to lock what to what ?
The other thing a Tesla coil is a magical device well sort of in that it's base is a current seeking device and it's top is a static voltage device just like the atmosphere above. clue ?