Free Solid State/mechanical energy

[barbosi]

Yes. A lot of crude ideas were lost, including mines.
However, I was rambling on capacitance topic and I was trying to make a sense on what a capacitance is and why coils act as capacitors.
On the topic, today starting from "magneto-dielectric energy" the one pointed Erfinder (I hope I recall right the expression) I found the link I recently posted.
http://www.borderlands.com/dollardandtesla.htm
There is also mentioned a book by Steinmetz "Electric Discharges, Waves and Impulses".
This book is available for free download at: http://www.archive.org/details/elementarylectur00steirich

Maybe some readings from 1919 or so will give a sense on what man of that time were researching. It is clear to me a lot of info has been abandoned.

[Grumpy]

I have started to see some connections between the works of Tesla, Wilbert B. Smith, Dave Lowrance, and Kosol Ouch (William Hooper too.).  Three-state resonance.  Various coils and interactions with aluminum, copper, crustals, etc.

Universe is 12 dimensions - 3 sets of 4 - Tempic field (one domension - time) varies and creates a divergence (2 dimensions - electric) which curls (magnetic - three dimensions) - three fields perpenicular are to each other.  Manipulation of these three allows manipulation of everything to some degree.  Length of wire is critical when working with tempic field.  Tempic is aslo called torsion and what I consider "potential".  It's the primal field and exists without the other two.  Ffree energy, levitation, transmutation, time travel, etc - it's all possible to some degree.

Anyway,  I'm still gathering info and sorting it out...will be experimenting shortly.

P.S. Ran across some info that explained Erfinder's series connected coils - will find it again and post it.  Made perfect sense when I read it.

[Maximumgravity1]

I was sorry to see Barbosi and Allcanadian's posts gone - they both had some good info.  The important thing is the thoughts were there - so they should resurface in due time.

I found a few interesting things quite by accident.  I was looking at some videos on You Tube - Looooove you tube - can't get out of there for hours.  Anyway, I made a few interesting discoveries.  The first is this video:
http://www.youtube.com/watch?v=m8PAqu-HPuw
It is a series of still shots that show some Tesla Coil discharges.  Of particular interest in this video, you can see in most frames that the electricity does come off the toroid ring in paired vortex spirals - much like a DNA helix.  It is worth a look, as it is interesting to see it in action.  Something that you can not see when it is in full motion.

Second was of a Toroid device by Steven Mark.  As I see there are a few topics on this forum about the Steven Mark TPU, I know some of you are familiar with it.  Aside from the interesting aspect of the device, I found something quite interesting:
http://www.thewaterengine.com/pdf/stevenmarktpu.pdf
On Page 10 of this PDF is the following quote:
"Now about the DC output with AC signal.  There is a book about Nicola Tesla "The Man who Had lightning in his hand". I suggest that you find a copy of that book and read it. In that book it is related that Tesla states that you can have all kinds of electrons flowing through a wire traveling in different directions relating only to their potential power source. He even said that you could have different electron flows through a single wire completely separate from each other. I tried it and he is right!"

Of course this is a third-party quote, but it answered many of the problems I had in understanding the fields when the condenser discharges.  I think this puts the mystery of the 90? phase shift one step closer to being understood.  It got me thinking that the reason we perceive of electron flow (current, magnets, charge, energy etc) through a wire in one direction is we create devices that cause this to happen.  But this is not to say that it is limited to flowing in only one direction.  It is clear from much of what I have read, especially Leedskalnin, that when a charge/current/magnet/electric is induced in a coil, it begins at the center of the coil, and radiates out towards both ends of that coil simultaneously.  Likewise, it stands to reason that two charges could be sent through a wire simultaneously in opposite directions.  This would have some interesting effects if the two pulses were 90? out of phase from each other.  Coincidentally, this appears to be almost (if not exactly) what is happening in this patent.  I am not sure if both currents truly are 90? out of phase when the capacitor discharges, but they are at 90? angles in relation to the armature, thus their fields are intersecting at right angles.  Despite this, within the "F" circuit (secondaries) they do approach each other from different directions simultaneously, in the same wire, in the same circuit (when the condenser discharges).

The part that is throwing me is that I have read that DC cannot pass through a capacitor, but AC can.  I am not entirely sure how this is so, therefore, I do not fully understand the implications, nor the properties of how the capacitor works in regards to AC, and I may be misunderstanding something.  My complete working knowledge of condenser's is in older combustion engine ignitions.  These are primarily DC, and only fire when the points close.  However, it causes me to think more on the concept that ERFINDER told us that the individual coils make up the 12 plates of a capacitor.  I am beginning to see a resonance (simultaneous oscillation) developing in all three circuits, and making it hard to distinguish where the fields begin and the circuits stop.  This further emphasizes the static field being moving, and the magnetic fields being static.  And just when I was begining to realize there was no such thing as electricity - only magnetism...LOL

By the way, the book title in the quote above is wrong, it is "Lightning in his hand.  A biography of Nikola Tesla" by Inez Hunt and Wanetta W. Draper.  (This site linked has it for $16.95, but is out of stock, Amazon has it for $200.  There are some interesting library resources that show it available, but most are from university libraries, and the nearest to me is almost 2 hours away.)  I am not sure if any of you own this book, or would have access to it in your local libraries, but if someone could confirm (or better yet) post the areas that this is referencing, it would be great.  It may even be in other works, such as a patent or elsewhere.

[am1ll3r]

Hello again everyone.

I would like to say I am not an electrical engineer nor do I have a electrical background. I have done electrical work in my house, small projects and I am not afraid to try anything.
I  guess what I am saying I don't have by any means a full comprehension of mainstream electronics but know enough to do some damage.

With that here is what I see in patten 464666.
The circuit formed by coils E on poles A are charged by and outside source.This also sets the polarity on the A poles.
Next the E coils circuit charge the circuit formed by the F coils.
Next the F coils pass their high voltage(HV) to the circuit formed by the coils G on poles B, but before it can complete path it is, lets say paused by a 1/4 phase buy the condenser.
Next the circuit from coils G are charged with (HV) and thus setting the polarity on the poles B.
Since the 2 secondary circuits are (closed upon themselves) or connected the (HV) then travels back to the circuit F on poles A  but again  paused buy the condenser.
This back in forth pulsing fields then causes the amateurs to spin.
In a nut shell that's what I see.

Now lets say after the initial charge the outside source is cut will the two secondaries circuits continue to pulse the (HV) back and forth ?
Would this be acting like Ed Leedskalnins' Perpetual Motion Holder ?

Well I put this into motion in an animated gif so take a look see what you think.
It's late and I need to get some rest.

Cheers
am1ll3r

[midnight_blue]

allcanadian


    If you can try and give me some knowledge of what you were explaining on some of your posts that you lost I may be able to help you. I saved some topics, but not the names, I think I may be able to get them back for you. If you had some drawings that would help also.The server was down yesterday for awhile as I did notice that, really folks this has happened before on another link of Overunity and a lot of posts were lost. 


Trump

Trump,

If you can post the info after zepharim post #465 until the server when down, that would help many as there was alot of good info posted.

Thanks,
Mark