Quantum Energy Generator (QEG) Open Sourced (by HopeGirl)

[MileHigh]

PCB:

I am slowly recovering from the read.  Too much work for a full rebuttal, plus most of my my comments would be repeats if one was to read the full thread.  But seriously, if I was just to copy the text and then paste and put in bold everything that was offensive and/or just plain wrong, probably about 2/3 of the text would be highlighted.  It was like ingesting toxins!

But I can just go ooooommmmmmmm... and flip on the switch and dial in my "excitation" frequency; you might get harmonic resonance ectoplasm.  (They can use it for tacking down the magnet wire when they make coils.)

Farmhand:

A battery-scope lead directly across a CSR anywhere in the circuit would be fine and there are no displacement currents to worry about.  The real term is just "stray capacitance."  Then you do a simple thought experiment: How much stray capacitance is there between my multimeter leads and the rest of the circuit?  Well, that's a giant air capacitor with tiny tiny plates.  If you know the formula for the capacitance between two metal plates you see that keeping the distance between the plates is the key to getting high capacitance.  When the distance is 12 inches and the "plates" are thin wires, the brain does a pseudo crunch and you say to yourself "it must be pico pico pico farads or something like that."  So you can ignore it.  Then the brain takes a different tack.   You know that capacitance between two wires that are far apart is minuscule.  Therefore the only way for that to have any affect would be for the frequencies to be insanely high, way higher than the frequencies that you are operating at.

When you start working with your scope, you notice that high frequencies can have small affects on the scope waveform when the probe is close but not touching.  You notice when the probe is more than two inches away the high frequency on your display disappears.  You start develop a sixth sense about stray capacitance and the frquency content and amplitude of your waveform.  Just like you become aware that large currents in wires will produce magnetic fields that may cause unwanted couplings.  Likewise, you are aware when you have high current in a pair of wires going in opposite directions (like a power cord) that the two fields are canceling each other out.

That leads to an interesting observation:  If you look at the signal layers of a multi-layer PCB, you will notice that the traces in adjacent layers are often at right angles to each other.

MileHigh

[PCB]

@MH

Sorry to put you into toxic shock, but if you go back a page you will see the links I posted from HG on be-do that got me going on this frenetic series of postings.  Remember its mostly  tongue in cheek... not to be taken too seriously...  sipping a small brandy, calmed down abit now, wife talking about mating slugs and them eating slim..  Incidentally, are you saying it's not illegal to hive power off your local broadcaster, and exactly which bits were incorrect?

[PCB]

The area under the curve product power.  HA, top that 

That is certainly much longer but not I think quite as catchy as Quadratic Power, you would agree I'm sure?

Incidentally, I have made a good many posts today so why am I stuck at 134. I think that malfeasance might be a foot. Somebody does not want me to reach "hero" status. Actually it appears that every bodies posting counter is stuck. What's going on here? I only do this for the score...

15 min later: OK this is plan wrong, I and everybody else have had their counters frozen for many days, who do I complain to about this?

[ACG]

Blind faith against and the automatic dismissal of evidence, measurements, reproduction is also important to the crusade.  WE spit on predictable repeatable accurate results.  WE have no place for such evil science and that blasphemy vial virus of manipulation called engineering.  Hummmmmm

[Pirate88179]

Incidentally, I have made a good many posts today so why am I stuck at 134. I think that malfeasance might be a foot. Somebody does not want me to reach "hero" status. Actually it appears that every bodies posting counter is stuck. What's going on here? I only do this for the score...

15 min later: OK this is plan wrong, I and everybody else have had their counters frozen for many days, who do I complain to about this?

It appears that you are still at 134.  Perhaps you are not really posting?  Maybe you just think you are posting, or you intended to post but forgot to do so?  Possibly all of us have not really posted anything in the past few days?  I know that we think that we have but obviously, we have not.  Maybe we just need to focus our energies better when posting and then, we will have really posted?

Bill