Partnered Output Coils - Free Energy

[tinman]

No need to private email me threats Chris.
Feel free to post what ever you like ,here on the thread.

I will start by posting your email to me here,as i have nothing to hide.

Bradley Richard Atherton aka Tinman - I can prove, mathematically, that you pulled some of the Figures you provided, as evidence, from thin Air...I already started the Ball rolling, and I can complete the task if required.

Yes Chris,that is my name,and i have posted it many times here on this forum.
Feel free to prove !mathematically! what ever you like-but it come's at a cost Chris.
If you so choose to try and prove me wrong,then do so by providing absolute evidence that your POC is OU. My evidence points toward it being not OU.

Take care Chris,as i can quite easily provide a video showing the very numbers i posted,and then show what happens to those numbers when correct value resistors are used.
You are assuming that nothing else will change in the performance of my POC transformer when resistor values are changed to correct values.
You also assume that my DMMs are out,but fail to understand that they were being used to measure the voltage across the resistor's-just as the scope was. This is how i confirm the numbers being shown on the scope-the RMS value,and overall current.
As i stated,and as OHMs law prove's,if the resister values we are using to calculate current are wrong,then so is the end result-no rocket science there.

I suggest you set forth and edit your Post, and have some class of your own. I can prove twice you have miss Lead people, I can do it many more times, publically if you wish?

I will do no editing at all,and please know that i bow to no man's demands.
I seen a few posts back,you were taking the mickey out of another member for there grammar,so in all fairness,you spelt publicly wrong-please edit your post 
Feel free to show where i have !miss lead! people--by the way,that is mislead 

Now you have potential, you are a First Class Engineer, so I suggest you act like one and stop falsifying Information!

I have falsified no information.
In fact,the first numbers i provided after testing the POC setup i showed,could be seen as !incorrect! information,as there was a error in the measurements taken.

We are now at post 7955-yes,7955,in your thread,and still no one has an OU device based around the information you have provided-not even your self.


Enjoy Chris


Brad.

[hartiberlin]

Hi all,
please no more hate or flame postings in this thread,
I already deleted 2 postings from Chris and Phixxxx.

Otherwise I will moderate all users who flame each other.
Please let us discuss this like Gentlemen.

Many thanks for your understandings..

Regards, Stefan.

[hyiq]

@Partzman and Itsu - You both deserve a little bit more of a Hand for your excellent Work!

 

What is the Resulting Electromagnetic Wave Velocity in your Recent MrPreva Experiments?


Also, what is the First Harmonic?



    Chris Sykes
        hyiq.org




P.S:  Stefan, I appreciate your professionalism in handling the recent outburst.

[hyiq]

Thank You Brad, this is exactly what I wanted to see!!! That's exactly what this is about isn't it, you have attempted to force my hand! You are attempting to force information out of me! And keep Failing.

...then do so by providing absolute evidence that your POC is OU.

It is so to deny any and all evidence presented because of a lack of understanding. You deny Graham Gunderson's device, because you can not make it work?  You Deny Akula's Work because you can not make it work?

These men are not Frauds, like you choose to believe, you choose to instead, belittle their work, to bemean it, and to bring into question their credibility!

Know this simple plain fact, Arthur Tränkle has Invested his Money and some Four odd years of his Time and Effort, in Akula's work, a Businessman with half a brain would never, in a million years, do such a thing if it did not work.


Well, in the face of absolute proof, I open my eyes, I study, I learn, I indulge in the facts I have gained! I said it years ago, a Video Demo will not help you! How many have you had? I could possibly count in the Hundreds!!! You choose to deny them all, because you can not replicate any of them! Because you do not understand what to look for!

Well, Bradley, I choose to not share anymore information with you! I choose to not help in the direction of, or in the understanding of this technology! All honest readers, you can choose who to Blame.




Know this, every time you post, every time you mention Bucking Coils, or any variant of, and you have Many Many Times!!! Know, that came from Me. Most all of the work you share, some of your most successful, you used My work, and you admitted it many times!!! There is no way, in a million years, you could have done it, without my work!!!

Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.

More dribble from some one that is all words,and has nothing to show.

Time after time we see you post endless crap,trying to make your self sound like some sort of masiha of induction,but actually have no clue as to what your talking about.

You post 1 video that shows nothing,and you think you have solved the worlds problems.
Fact is-like so many before you,your a coward--a clown with a big mouth that shoots everyone down,but wouldnt know shit from clay if you were standing in it.

I see you also have avoided taking me on--putting any of your devices up against mine,but still happy to mouth off at all i have done-->pathetic little weasel comes to mind.

Fact is,Chris would -and has-run rings around you in the subject matter,and most of what you have to say is garbage,and most of what you show is-er,well you havnt actually shown anything at all in the past years you have been at this-->your still as lost as you were 5 years ago.

Now,go and take your med's,and try to put something together that is worth while looking at.



Brad

Here is the problem with that Penno

1st-one of the persons that was helping me with that,has moved to another place,and the other-well,we dont see eye to eye on a lot of thing's needed to understand the workings of the RT--now im starting to sound like Erfinder  .
2nd--the brushes do not last very long-maybe 50 hour's.
3rd--the PM losses it's magnetism within 28 hours running under full load,and so the cost of replacing the PM,is far higher than what the power produced was worth.

So,there is no point in me providing complete detail's,and have others spend money on something that still has bug's to be ironed out.
When i find some one suitable to take on the task,then i will continue with it.
But for now,it remains buried.

But all is not lost,as ATM,i am putting the working principle to use ,in HHO production.
There you will see how large bucking magnetic fields can be produced by coil shorting in the right conditions. This energy gained from field bucking,is then sent to the HHO cell,at high frequencies(as far as generators go),and rides within the DC offset AC current within the cell,which also happens to be both a capacitor,a resistor,and a reactor.


Brad

https://www.google.com.au/?gws_rd=ssl#q=Brad+Bucking+site:overunity.com


I do things my way, I will do things how I see fit, and I will show my work when I see fit! I choose not to be another Akula!!! You have chosen to use my Linguistic techniques! It is interesting how people Grow over time!

Do all the experiments you can Brad, you're going to need to!

All the best, I hope that potential Shines!


   Chris Sykes
       hyiq.org






P.S: Miss Lead - Prisoner of Sub-Con-Science

[tinman]

Well As it seems that we have yet another person moderated(on his own thread),i will post a link to his video here.

https://www.youtube.com/watch?v=o2PV6N75mrk


Brad