12 times more output than input, dual mechanical oscillation system !

[ltseung888]

You have to be very careful that, as the weight descends, it is not putting back into the system the energy that is used to lift it, resulting in no net overall gain.

I think the Ting wheel is far more interesting because it deals with electrical issues which make OU more explainable (quantum foam, charged particles jumping into existence and gone again etc etc).

The Ting Wheel or other Pulse Wheels are far more interesting or practical because they can lead-out or bring-in magnetic or electromagnetic energy (that can be hundreds of thousands times more than gravitational energy).  Chan wheel is like human muscle flight.  Pulse Wheels are similar to using engines.  The only problem is that most Pulse Wheel Researchers have not figured out "pulsing at the right time" or pushing the pendulum at the right time.  They need to research on resonance more. 

The QEGs have achieved resonance.  It is a matter of determining how much electromagnetic energy can be brought-in...

[noonespecial]

@noonespecial,

If you keep jumping up and down on the scale, you will simulate the Milkovic 2SO better.  The pendulum moment is not constant.  It is the sum of the weight of the pendulum bob plus the centrifugal force.  The centrifugal force is highest when the velocity is highest (when the bob is at lowest position).

The "jumping" is the magic that leads-out or brings-in gravitational energy.

See the Chan Wheel videos again...

The traditional 2SO seems very similar to a parametric oscillator. The energy gained by gravitational acceleration and centrifugal force is transferred to the 'work' end of the lever. But it would seem that the transfer of that energy comes at the cost of pendulum amplitude. It will be interesting to see your test results and I look forward to them.


Best regards!

[ltseung888]

The traditional 2SO seems very similar to a parametric oscillator. The energy gained by gravitational acceleration and centrifugal force is transferred to the 'work' end of the lever. But it would seem that the transfer of that energy comes at the cost of pendulum amplitude. It will be interesting to see your test results and I look forward to them.


Best regards!

Please check the Raymond Head video again.  Note that lead-out energy occurs after the amplitude had been built up.  The INPUT of finger push then lifted the 74 pound Weight twice.  The lifting of the 74 pound Weight is regarded as OUTPUT.  From this video alone, there is strong evidence of Lead-Out Energy as the amplitude of oscillation hardly decreased.

We can always email Mr. Head for him to do the accurate comparison measurements.  He should get the credit.

At the same time, we have one Chan Wheel and are in the process of building more.  These simple Chan Wheels will allow multiple parties to do accurate measurements.

The most important experiment involving the Chan Wheel is the comparison of balanced and unbalanced wheels.  The balanced wheel has more weight and thus the static (no motion) moment is higher than the unbalanced wheel.  However, it cannot lift the weight no matter how fast we spin the wheel.  The unbalanced wheel easily lifted the weight - even with no initial spinning by hand.  The attached weight can be placed at the top and allowed to fall.  That is enough to lift the weight.

We understand the obstacles.  We know that both USA and Chinese Governments are keeping the 225 HP Pulse Motor top secret.

As one of the Physics Professors put it: "If we were to accept the concept of lead-out energy, we would have to re-write the textbooks and change our lectures.  Unless Tsinghua or MIT or the like take the lead, we dare not give you support no matter how strong is the evidence. None of us are willing to risk our careers."

The Hong Kong Students have shown that they are willing to defy authority.  What will happen if they have Chan Wheels in their hands?  Will this generation spearhead Lead-Out Energy research???  They need to show the World that they are worthy of something...

[ltseung888]

Analysis of the Christmas Gift continued


3.   The Chan Wheel is essentially the Milkovic 2SO with the pendulum replaced by the unbalanced wheel.  It is easy to construct.  It can demonstrate that the unbalanced wheel can bring in gravitational energy.  Once the wheel is balanced, it will NOT bring in gravitational energy.

Many asked the question: "Tseung, do you have a working OU device?  Theory is useless unless it is backed up by experiments.  Just looking at experimental results by third party is not conclusive.  Video demonstrations can be faked."

After I saw the light (Milkovic 2SO is OU!), I worked with Mr. Peter Chan to produce the Chan Wheel.  We replaced the pendulum with an unbalanced wheel.  As expected, the Milkovic 2SO result of lifting weight was demonstrated.

The additional bonus is that – we can demonstrate that a balanced wheel CANNOT lift the Weight and thus cannot lead-out or bring-in gravitational energy.  See the following youtube videos:

https://www.youtube.com/watch?v=HGaQ8a1PIt8  When the wheel is balanced.
https://www.youtube.com/watch?v=Wkis7FUVqKY  When the wheel is unbalanced.

Engineers have been brainwashed to produce balanced devices.  They are not used to designing unbalanced systems.  The key to bringing-in gravitational energy is the oscillation!

[noonespecial]

Please check the Raymond Head video again.  Note that lead-out energy occurs after the amplitude had been built up.  The INPUT of finger push then lifted the 74 pound Weight twice.  The lifting of the 74 pound Weight is regarded as OUTPUT.  From this video alone, there is strong evidence of Lead-Out Energy as the amplitude of oscillation hardly decreased.

Yes, I guess my only point was that the 2SO by itself is NOT a OU device. In its simplest form, its a lever where a downward force at one end creates a lifting force at the other. The absolute best it can do is near 100% efficiency (minus pivotal frictional losses) because the formula is F x D = F x D.


Any gain greater than 100% will be realized in the transfer of energy TO the input device (bicycle wheel in your case) relative to the final output. For instance, it would interesting to see if you could drive your input wheel with a 100 watt motor and then turn a >100 watt output generator. This would silence any critics.


Best regards!