IEC Earth Engine First Magnet motor installed in Las Vegas

[hartiberlin]

Well, if this magnet motor would have really worked.they would have used supercaps instead of the Big Yellow Battery and would have charged them up and usedthis for driving the Steppermotor to attenuate the magenetic dfelection and then would have usedthe white Aliexpress generator to recharge the supercaps and would have shown,that the supercaps would not discharge...
But this way they have shown it, I am almost sure the steppermotor has drawn more power than the white generatorhas delivered...
So the demo was a real failure...
We will see, if the next demos will be simular and how they will show the bigger machines then...
Regards, Stefan.

[rakarskiy]

Well, if this magnet motor would have really worked.they would have used supercaps instead of the Big Yellow Battery and would have charged them up and usedthis for driving the Steppermotor to attenuate the magenetic dfelection and then would have usedthe white Aliexpress generator to recharge the supercaps and would have shown,that the supercaps would not discharge...
But this way they have shown it, I am almost sure the steppermotor has drawn more power than the white generatorhas delivered...
So the demo was a real failure...
We will see, if the next demos will be simular and how they will show the bigger machines then...
Regards, Stefan.

Most likely, these guys do not want to disclose technology. But the algorithm is correct. If you remember, a VEGA motor-generator was manufactured in Odessa (Ukraine) at one time. With a 1 kW MAGLEV generator installed, only 100 watts were selected. But the accelerator in a pulse engine with a generator system had a power of about 300 W, and the generator circuit, in this accelerator at 300 rpm, was 320 W. (At a speed of 300 rpm, the accelerating module imed samokhod, provided that the MAGLEV generator was fixed at 100 watts) As a result, the power / kg indicator and the cost of the device were not commercial. With this wonderful system of Americans, I suppose, the same story. Not having received commercial interest, they began to engage in clowning. Personally, I liked them, the system of contactless removal of torque.

[TinselKoala]

 

[AlienGrey]

Na notice that vacant look on his face and also  how he is holding it down, so it doesn't float away !

[lumen]

So, is everyone convinced that the IEC devices don't work, Or that it was simply a bad demonstration that proved nothing.
I am asking because there is an interesting effect when the magnets are embedded into steel as a repelling ramp because the pushing magnet that causes the rotation is actually attracting into the repelling magnets and the ramp is still rotating without the repelling forces.

This itself is not that interesting except that when the controlling magnet is re-gated, it does so in attraction which takes less effort than when exposing under repelling forces.
Is that the secret that allows the IEC machines to operate?

Maybe it was intentional to have a mystical / just take my word for it demo, to delay any others progress?