Nelson Rocha Workbench

[nelsonrochaa]

I most certainly do have some thoughts and it's really good to hear from you again.

Years ago when I first started looking at your pancake coil work, I had fabricated some really nice PCB flat coils.  I made clockwise and counter-clockwise traces that could be perfectly aligned so the traces would lay exactly on top of each other.  I could then use various dielectric material between the boards to change the properties of the complete coil.  I located mounting holes so the plates could be tightly fastened together.

I did a lot of experimenting with these coils and because they were so precisely made, the results were very repeatable.  This leads me to the question...   Do you have in mind some basic experiments we should  attempt, with the vision in mind of where we all should end up as we begin to comprehend the inner most details of this exploration?

Oh, one other thing I should mention:  Switching...

There is a company that produces Silicon Carbide JFETs.  They absolutely put anything I've used prior to shame.  Being normally conductive JFETs, they flow current bidirectionally with practically zero resistance and they are extremely fast when driven with the proper gate control circuit.  I used them successfully with many parametric resonance experiments--the waveforms show almost no artifacts of the switching taking place.

Hi Dog-one,
I'm glad to see you here, it's been a while since our last conversation.
Hope everything is well with you.
These pancake coils pcb are very beautiful!
I have never tested pancake coils in this condition on pcb, but it would be interesting to know more about them such as inductance, resistance and capacity, I'm really curious about some of these characteristics.
In the future we can certainly try to use these coils, My intention is to create a model circuit, and after do another replication for testing, where we could include your pcb pancake coils  or other type of tests me or other participants sugest to do .
About Silicon Carbide JFETs, I never worked with them, although many people advertise them, however, i see no inconvenience in using them in the future in the switching circuit , thanks for the tip , i need check their prices , because my budget is low ☺  but if is accessible i will try them for sure .
Dog, you are very welcome to this topic, and I hope that it will be a motivation for all those who somehow like the topic covered.

Best rewards

Nelson Rocha

[EMJunkie]

Hi Chris ,

I am very happy and grateful for your sharing Chris.
I will try to take a look at this replication that you speak and maybe if i could try replicate them, because 4 times more Energy that was input is really a very good result!
What kind of measurements were made to reach this admirable value? What type of load used ? Resistive or inductive loads were used in the (output) to verify this gain ?

My time is a little reduced in this moment , however, I hope in the coming weeks to start to dynamize the thread a little more, because I need to organize myself in relation to some themes that are essential to i able to materialize some ideas to something replicable by everyone .
At this moment I am also trying to gather equipment that will allow me to start.
But everything has its time, and I hope that soon there will be good changes.

Best rewards

Nelson Rocha

Hi Nelson,

I am sorry My Friend, its not my experiment to share.

Only the Elite Builders on My Forum have access to this project. Many other experiments that also put Out more than In, COP > 1.0, are open source. Members, have the option of sharing publically, or not, the Member with this result is not sharing publically yet. Development stages.

By Following My Above-Unity tag, readers can see whats being worked on.

I wish more here would get serious! History, if we manage to not END Ourselves, will reflect very badly on these people that are Playing Dumb! These people need to Pull Finger and get a move on! Educate! Its Important!

Best wishes, stay safe and well,

   Chris Sykes

[Atti2]

Chris.
Make use of the work of the member representing the result in the patent office. Congratulations to him on the result.

[ramset]

Nelson,
As mentioned,I will be attempting to settup an acct at Mouser Portugal on Tuesday [holiday here Monday]

We have done this before and persons [members reading] could help pay for equipment and supplies towards open source experimenters projects.
So persons reading here can help the builder actually doing the work ...for Clarity Nelson has said he is not interested in a revenue stream ...just Equipment and
supplies for experiments..Might be setting up a few donate accts with different vendors for open source experiments such as Nelson is doing here.
to note : Dr Jones [member Physics prof ] has typically helped with these equipment Purchases ..he is assisting with this project too.once acc't is settup a link for those wishing to help will be posted in designated area.

sorry for interruption..
respectfully  Chet K //..//Ps for clarity Nelson cannot properly proceed without a few key pieces of equipment

[nelsonrochaa]

Hi Nelson,

I am sorry My Friend, its not my experiment to share.

Only the Elite Builders on My Forum have access to this project. Many other experiments that also put Out more than In, COP > 1.0, are open source. Members, have the option of sharing publically, or not, the Member with this result is not sharing publically yet. Development stages.

By Following My Above-Unity tag, readers can see whats being worked on.

I wish more here would get serious! History, if we manage to not END Ourselves, will reflect very badly on these people that are Playing Dumb! These people need to Pull Finger and get a move on! Educate! Its Important!

Best wishes, stay safe and well,

   Chris Sykes

Chris Sykes


Hi Chris ,
I understand . I appreciate your sincerity when you explain that you could not share because the experiment is not yours, and I respect that.   
In the past, I was also limited to sharing in detail some of the circuits that I did, but I thought that in the face of our recent conversations about "freeing ourselves from the bonds" of the big companies and working for the benefit of society, I thought you meant sharing in open-source, not by a restricted group of people.
I apologize for the misunderstanding.
Thus, we can only hope that these experiments will be successful and that the values you announced will be confirmed, as it would be very important, if your intention in the future is to share this discovery with the world.
I will always be available to listen to you and help you if you want in the future, to provide more (information) related to that system.
I wish you the best .