Lords of the Ring

[innovation_station]

marco and gk

i think you are doing great work

gk a question remember the black hole sun did you have any luck with that model? i remember you built 1 a while ago but herd nothing more about it im sure it could have worked i beleave i was so close at 1 point in time on the tpu but have lost it all now i could even see in my mind the compleat workings of the sm 17 including the plasma feild but i no longer can see it my mind has been cloulded over it will come back as it always does but not soon enough


turbo verry neet vid  how about this

do just what you had but make a ring 4 transformes a collector ring inside of the ring mags formed into a circle and bounce the flux of the ring mags into the collector wire kind of hard to understand what i mean but basicly a mechanical tpu or a tpu with pmemaniant magnets insted of coils

just some crazy thoughts

my scope will be comming soon i have to finish the job im on first as every job goes there is always extras but i will get there

ok all this really sux i had it for a min i wrote it all out here then my puter crashed what i had written was awsome but is now lost gotta love windoze  neways

i wish i could have remembered what i had said but i cant maybe it will come back

but it just made realy good sence im sure you all would have thought the same but i guess it was not time

it was all about freq and size of rings it just made much sence to me and it was simple but i went on top say how i thought it was like teslas death ray  i think it was 1 of my best poasts ever im sorry you all could not have read it but when it comes back i will share it with all till then im back thinking i can say my thoughts were trigured by turbos video i will try to retrace my last footsteps and see if i can get it back

i was saying why i thought it was only 2 freqs and how the 3rd 1 worked to make the entire tpu operate but agin they were only thoughts but i think my best so far on this project

one thing i remember from it was that tesla said all we have to do is put our coils in harmony with the earth and we can convert as much power as a given coil can handle 

i will leave it there hopefuly it will come back to me

is

[giantkiller]

hi GK 
that looks like a 4? channel drive.
verry nice.
Marco

And it's 1,2,3,4 all seperate. If I need synching I can pull the fet drive from inside and patch something in. That will make the
next step of geting the fet drivers next to the fets themselves. The fet driver board is temporary. I am working on a
circular one for fet placement in the TPU. You an Roberto did this. I wil too. I don't mind taking smaller steps. Better
for safety reasons, the audience behavior and participation.

@all,
Along the lines of the transformer action:
I will put this in perspective using alot of examples.
This comes under the heading of magnetic field shearing.
It can be done in many ways and we see it everyday.
This is done by Bedini and Bearden with the bicycle wheel. 2 magnets passing each other.
This has been done by Bill Muller with the large aluminum wheel. It actually is a larger model of the electric meter on your abode.
The Perendev motor. Not electrical connections on this puppy. But we know the next step. Just place pickups on it.
These are all mechanical so these attempts are good show and tells. This approach will not sustain any strength in the future.
Put a blocking oscillator in the feedback loop and you have the little girl circuit motor. Why do some versions of this show a small dc motor? Spark gap. We here at OU haven't approached this avenue enough. Tesla's work screams about this neccessity.

The real approach is solid state.
SM said many times. 2 balls rotating in space. Wow! Sounds like the machine in the movie contact.
We all know this well.

Lets state the obvious again and it is never boring.
Counter rotating magnetic field equals extremely high speed opposition.
Non-counter rotating needs 2 frequencies. This equals phase cancellation and intemodulation which equates to extremely high speed harmonic or resultant frequencies.
Both of these methods can produce speed greater than your wildest dreams at no cost. The timers circuits we try to do this with pale in comparison to letting the coil do it for us! Work smarter not harder!
Look at the Hubbard coils. He agitated the coils with some Radioactive material. Can you say half-life? RFC.
http://www.rexresearch.com/hubbard/hubbard.htm

I made the Bedini LGC with 2 cross coupled stunguns too. First output to 2 trigger. 2nd trigger to 1st trigger. The loop
took off for one cycle then fried the 2nd gun on the 2nd loop. Whaddya think? If I buffered my trigger inputs I would
have OU. Say again? Look at the excessive RE coming out of the guns. Electrically this is not OU. But across the spectrum of energies it is. The losses are our inability here to tune, time, and capture RE. I am talking on a different plane here. Tesla would love this one.

The opposing transformer fits in here nicely too. Looks mighty close to running two fields past each other. Hmmm...
No matter what the expression of variables through these projects are they all point down to one thing and that is high speed agitation and/or interference.
The key is and always will be for any progress is running the copper faster than it can react. Same process as bombarding an aluminium plate with xray, vibrating a piece of metal greater than 40khz, or pushing energy off the end of a wire into space.

--giantkiller.

[giantkiller]

marco and gk

i think you are doing great work

gk a question remember the black hole sun did you have any luck with that model? i remember you built 1 a while ago but herd nothing more about it im sure it could have worked i beleave i was so close at 1 point in time on the tpu but have lost it all now i could even see in my mind the compleat workings of the sm 17 including the plasma feild but i no longer can see it my mind has been cloulded over it will come back as it always does but not soon enough


turbo verry neet vid  how about this

do just what you had but make a ring 4 transformes a collector ring inside of the ring mags formed into a circle and bounce the flux of the ring mags into the collector wire kind of hard to understand what i mean but basicly a mechanical tpu or a tpu with pmemaniant magnets insted of coils

just some crazy thoughts

my scope will be comming soon i have to finish the job im on first as every job goes there is always extras but i will get there

is

@IS,
Yes I did turn that one on. It was physically close but mathematically and electrically wrong. I fired it with a stun gun and seen the sparks jump all over and the signal jump to the EZflow inductively. But that wasn't good enough. I moved the stun gun up to the 15" inch loop and fired it. That is when the test brought down my PCs, router, and cable modem. So I stopped and never went back the copy of what you were showing. My copy of the black hole sun has been shelved. Physically these coils can be made physically close but there are alsways other hidden factors. The is many of the previous coil winders have left.

Thanks for the question. I have a number of steps to take right now with what is on my plate.

[Earl]

Hi Marco,

be careful in your experiments not to be tricked by the magnets causing increased flux in the transformer cores, which decreases winding inductance.

In your video, I would say that the oscillator frequency changes are caused by decrease in winding inductance, which in turn is caused by increased core flux, which again is caused by increased external magnetic field.

I will soon post an image of what I mean by flux bending in opposing (repelling) magnetic fields.

Earl

hi Earl,
indeed yesterday when i placed two magnets in a 90 degree fashion (one horizontal and one vertical) ontop of a transformer there was some sort of intresting "scattering" like phenomena in the output signal.
it got my attention and i am going to examine it further.
Marco.

[Earl]

Here are some generic simulations showing how magnetic flux is bent in repelling fields, and how a magnetic black hole forms between the two poles.

The image "opposing coils+TPU" shows how two electromagnets could be used to "spray" a magnetic field into horizontal bars (the collector coil made out of a thousand fine Litz wires as well as a final external winding consisting of round dots (cross section view).

Notice that there is a big difference where the collector conductors are located in the coil.  In the axial center of the coils there is little magnetic flux, however this might not be negative if the magnetic black hole should cause an inrushing aether vortex.

It would make an interesting experiment to try moving the coils and compare results when the collector coils are

• in the axial center of the coil
• close to the coil wall

Notice that flux between unlike poles is captured and concentrated by a piece of iron, but that with like poles the magnetic flux totally ignores the presence of iron.  This is because there simply in no flux there.  This bending of magnetic flux into an orthogonal plane with resultant magnetic black hole has always fancinated me.

Feel free to ask questions about the images if you need further explanation.

Regards, Earl