Lords of the Ring

[bolt]

I would love to build it but don't have the resources to do it. So in the meantime GK is the only one getting very very close because he has determination and the resources to do it. Most importantly i have refocused this thread that went off on a 12 month detour using square waves and spikes. Thats not how its done at all.  However i have extremely valid reasons to believe thats ferrite or aluminum core (latter possible but unlikely)  on top of the large control unit.  Look i don't want to argue about it just a waste of time. You been here for a year posted over 600 messages and learn  very little.

I been here for just 2 weeks now and unraveled 90% of the theory. I can tell you this. Every sub component of the TPU is using methods that have already been done before and its a mixture of pure audio, RF and classic circuity. As SM says no mass circuitry. Its only the overall makeup of the device that makes it work in this fashion. I am not surprised SM had to basically come on this forum and vent his frustration. What i propose will create an EM cloud. it will also produce intense EM bright spot under certain conditions.  When balanced there should be no radiation outside of the coils and we can control the aperture. Anyone serious in lab conditions getting close or already done this will know exactly what im talking about.I have an explanation for the slow start and decay and know exactly how the magnets work. Do i have a full circuit? no of course not but i have a solid foundation.

[EMdevices]

bolt watch out, Grumpy lives up to his nameÃ,  LOLÃ, Ã, 

Seriously though,Ã,  I like to hear people theorize, but in the end we do need to build and test the theories.


Here's how I've wondered the TPU landscape:

1)Ã,  TPU is an antenna for RFÃ,  energy (TV towner, radio, marine becons, grid, etc..)

2)Ã,  TPU is a magnetic loop antena for low frequency Schumann waves

3)Ã,  TPU is taping the magnetic spin of atoms, through the use of NMRÃ,  (nuclear magnetic resonance) Larmor frequency

4)Ã,  TPU uses audio resonance

5)Ã,  TPU is an ingenious ENERGY multiplier through the use of resonance and standing waves, like a TESLA coil.

6)Ã,  TPU uses 3 phase (or 2 phase) coils and functions like an AC motor, creating a rotational field

7)Ã,  TPU is FAKEÃ, Ã,  LOLÃ, Ã, 

8 )Ã,  TPU is perhaps a magnetic antenna, perhaps using all of the above (minus the FAKE)

A number of concepts have been proposed and lots of theory expounded, but in the end we need to build and experiment.

EM

P.S.Ã,  By the way GK,Ã,  I appreciate your tenacity, sticking with this project and experimenting away.Ã,  I enjoy your videos on youtube,Ã,  I don't pop in here that much but I do watch,Ã,  keep up the good work man !!!

[innovation_station]

@bolt

can you lay out your simplest design for your versoin of the coil and i will put one togather and im sure others will too then that will take most of the guess work out of it and we all can finish the 5% or 10% that is left publicly


save some time and confusion here     it has been a long road so far for most

just a thought since you can not build it at this time

is


you never know i may just finish my machine b4 the tpu even comes compleatly public

[Gothic]

I remember reading a quote in the S.M. documentation--  "you have to disable the effects of the flux"
  That statement sticks with me,  something like a room temperature superconductor, but with off
  the shelf materials.  I know of three different people who describes a similiar thing, Tom Beardon
  describes it as containing all flux inside of a material you no longer have the normal B field
  (curved) but a differrent one which extends straight out,  Erfinder called it the void, Ring theory had
  something similiar.

If it is the earths field being utilized in the tpu, then how do we disable the flux? my guess is a
  helmholtz, which is used for the purpose of just that, disabling the earths flux inside the helmholtz
  coil.  what exactly is flux anyway? many questions the pure logical mind can,t answer

[Grumpy]

I would love to build it but don't have the resources to do it. So in the meantime GK is the only one getting very very close because he has determination and the resources to do it. Most importantly i have refocused this thread that went off on a 12 month detour using square waves and spikes. Thats not how its done at all.  However i have extremely valid reasons to believe thats ferrite or aluminum core (latter possible but unlikely)  on top of the large control unit.  Look i don't want to argue about it just a waste of time. You been here for a year posted over 600 messages and learn  very little.

Sine waves = no OU = no RE

If you read back a few pages, you wi ll see that GK is making RE - with square waves.

If you read Bob Boyce's post  - he uses square waves in his rings.

If you read Dave Lowrances "Overunity in Copper" essay - he used square waves.

If you read the latter works of Nikola Tesla - he used pulses - undirectional - and produced RE at each make and break of the circuit (like a damn square wave).

Aluminum is an AG material but you mention nothing of this.  Could be bismuth or titanium in the TPU for all you know.   

You talk of your "cards" and "valid reasons" but give nothing to support them.

You have all the answers to the wrong questions.

600 posts - what do you know of what I have learned?   I have learned to keep my damn mouth shut.  I have learned to share knowledge wisely.  I have learned to keep friends close and enemies closer.  I have learned that humans don;t know squat about the universe as a whole - we are barely out of the primordial muck.

I have learned that silicon based materials are "bandwidth limited".

What have you learned?

I been here for just 2 weeks now and unraveled 90% of the theory. I can tell you this. Every sub component of the TPU is using methods that have already been done before and its a mixture of pure audio, RF and classic circuity. As SM says no mass circuitry. Its only the overall makeup of the device that makes it work in this fashion. I am not surprised SM had to basically come on this forum and vent his frustration. What i propose will create an EM cloud. it will also produce intense EM bright spot under certain conditions.  When balanced there should be no radiation outside of the coils and we can control the aperture. Anyone serious in lab conditions getting close or already done this will know exactly what im talking about.I have an explanation for the slow start and decay and know exactly how the magnets work. Do i have a full circuit? no of course not but i have a solid foundation.

An EM cloud?   In case you have n ot noticed, the "M" in EM is an issue. You need ES (or ED), not EM.

Stephan Marinov created a table-top pulsar - and died for it.  You probably never heard of him.

Tesla used a magnet to reduce frequencies to an audible range.  You probably never heard of that either.

Soild foundation - then build it or ask someone else to.